linux-stable.git/tools, branch v5.4.182

perf data: Fix double free in perf_session__delete()

2022-03-02T10:41:05+00:00

commit 69560e366fc4d5fca7bebb0e44edbfafc8bcaf05 upstream.

When perf_data__create_dir() fails, it calls close_dir(), but
perf_session__delete() also calls close_dir() and since dir.version and
dir.nr were initialized by perf_data__create_dir(), a double free occurs.

This patch moves the initialization of dir.version and dir.nr after
successful initialization of dir.files, that prevents double freeing.
This behavior is already implemented in perf_data__open_dir().

Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Alexey Bayduraev 
Acked-by: Jiri Olsa 
Cc: Adrian Hunter 
Cc: Alexander Antonov 
Cc: Alexander Shishkin 
Cc: Alexei Budankov 
Cc: Andi Kleen 
Cc: Ingo Molnar 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

libsubcmd: Fix use-after-free for realloc(..., 0)

2022-02-23T10:59:58+00:00

commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream.

GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:

In file included from help.c:12:
In function 'xrealloc',
    inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
   56 |                 ret = realloc(ptr, size);
      |                       ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
   52 |         void *ret = realloc(ptr, size);
      |                     ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
   58 |                         ret = realloc(ptr, 1);
      |                               ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
   52 |         void *ret = realloc(ptr, size);
      |                     ^~~~~~~~~~~~~~~~~~

Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks 
Signed-off-by: Kees Kook 
Tested-by: Valdis Klētnieks 
Tested-by: Justin M. Forbes 
Acked-by: Josh Poimboeuf 
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks 
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

selftests/zram: Adapt the situation that /dev/zram0 is being used

2022-02-23T10:59:55+00:00

[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]

If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.

The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.

Signed-off-by: Yang Xu 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/zram01.sh: Fix compression ratio calculation

2022-02-23T10:59:55+00:00

[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ]

zram01 uses `free -m` to measure zram memory usage. The results are no
sense because they are polluted by all running processes on the system.

We Should only calculate the free memory delta for the current process.
So use the third field of /sys/block/zram/mm_stat to measure memory
usage instead. The file is available since kernel 4.1.

orig_data_size(first): uncompressed size of data stored in this disk.
compr_data_size(second): compressed size of data stored in this disk
mem_used_total(third): the amount of memory allocated for this disk

Also remove useless zram cleanup call in zram_fill_fs and so we don't
need to cleanup zram twice if fails.

Signed-off-by: Yang Xu 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/zram: Skip max_comp_streams interface on newer kernel

2022-02-23T10:59:55+00:00

[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ]

Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.

The code that comparing kernel version is from xfstests testsuite ext4/053.

Signed-off-by: Yang Xu 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests: rtc: Increase test timeout so that all tests run

2022-02-23T10:59:55+00:00

[ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ]

The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.

However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.

In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.

Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:

	./run_kselftest.sh -c rtc

Signed-off-by: Nícolas F. R. A. Prado 
Acked-by: Alexandre Belloni 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

perf probe: Fix ppc64 'perf probe add events failed' case

2022-02-16T11:52:50+00:00

commit 4624f199327a704dd1069aca1c3cadb8f2a28c6f upstream.

Because of commit bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms
lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf
command eliminates the need to use the prefix "." at the symbol name.

But when the command "perf probe -a schedule" is executed on ppc64
ABIv1, it obtains two symbol address information through /proc/kallsyms,
for example:

  cat /proc/kallsyms | grep -w schedule
  c000000000657020 T .schedule
  c000000000d4fdb8 D schedule

The symbol "D schedule" is not a function symbol, and perf will print:
"p:probe/schedule _text+13958584"Failed to write event: Invalid argument

Therefore, when searching symbols from map and adding probe point for
them, a symbol type check is added. If the type of symbol is not a
function, skip it.

Fixes: bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2")
Signed-off-by: Zechuan Chen 
Acked-by: Masami Hiramatsu 
Cc: Alexander Shishkin 
Cc: Ingo Molnar 
Cc: Jianlin Lv 
Cc: Jin Yao 
Cc: Jiri Olsa 
Cc: Mark Rutland 
Cc: Michael Ellerman 
Cc: Namhyung Kim 
Cc: Naveen N. Rao 
Cc: Peter Zijlstra 
Cc: Ravi Bangoria 
Cc: Yang Jihong 
Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo 
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

selftests: futex: Use variable MAKE instead of make

2022-02-08T17:24:34+00:00

commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream.

Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:

make[2]: warning: jobserver unavailable: using -j1.  Add '+' to parent make rule.

Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Muhammad Usama Anjum 
Reviewed-by: André Almeida 
Signed-off-by: Shuah Khan 
Signed-off-by: Greg Kroah-Hartman

perf script: Fix hex dump character output

2022-01-27T08:19:54+00:00

commit 62942e9fda9fd1def10ffcbd5e1c025b3c9eec17 upstream.

Using grep -C with perf script -D can give erroneous results as grep loses
lines due to non-printable characters, for example, below the 0020, 0060
and 0070 lines are missing:

 $ perf script -D | grep -C10 AUX | head
 .  0010:  08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00  ................
 .  0030:  01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00  ................
 .  0040:  00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00  ................
 .  0050:  00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
 .  0080:  02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00  ................
 .  0090:  00 00 00 00 00 00 00 00                          ........

 0 0 0x450 [0x98]: PERF_RECORD_AUXTRACE_INFO type: 1
   PMU Type            8
   Time Shift          31

perf's isprint() is a custom implementation from the kernel, but the
kernel's _ctype appears to include characters from Latin-1 Supplement which
is not compatible with, for example, UTF-8. Fix by checking also isascii().

After:

 $ tools/perf/perf script -D | grep -C10 AUX | head
 .  0010:  08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00  ................
 .  0020:  03 84 32 2f 00 00 00 00 63 7c 4f d2 fa ff ff ff  ..2/....c|O.....
 .  0030:  01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00  ................
 .  0040:  00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00  ................
 .  0050:  00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
 .  0060:  00 02 00 00 00 00 00 00 00 c0 03 00 00 00 00 00  ................
 .  0070:  e2 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00  ................
 .  0080:  02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00  ................
 .  0090:  00 00 00 00 00 00 00 00                          ........

Fixes: 3052ba56bcb58904 ("tools perf: Move from sane_ctype.h obtained from git to the Linux's original")
Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Link: http://lore.kernel.org/lkml/20220112085057.277205-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

bpftool: Remove inclusion of utilities.mak from Makefiles

2022-01-27T08:19:53+00:00

commit 48f5aef4c458c19ab337eed8c95a6486cc014aa3 upstream.

Bpftool's Makefile, and the Makefile for its documentation, both include
scripts/utilities.mak, but they use none of the items defined in this
file. Remove the includes.

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet 
Signed-off-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20211110114632.24537-3-quentin@isovalent.com
Signed-off-by: Greg Kroah-Hartman