linux-stable.git/tools, branch v5.4.1

usbip: tools: fix fd leakage in the function of read_attr_usbip_status

2019-11-29T09:10:21+00:00

commit 26a4d4c00f85cb844dd11dd35e848b079c2f5e8f upstream.

We should close the fd before the return of read_attr_usbip_status.

Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend")
Signed-off-by: Hewenliang 
Cc: stable 
Link: https://lore.kernel.org/r/20191025043515.20053-1-hewenliang4@huawei.com
Signed-off-by: Greg Kroah-Hartman

selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel

2019-11-29T09:09:59+00:00

commit 4d2fa82d98d2d296043a04eb517d7dbade5b13b8 upstream.

If the kernel accidentally uses DS or ES while the user values are
loaded, it will work fine for sane userspace.  In the interest of
simulating maximally insane userspace, make sigreturn_32 zero out DS
and ES for the nasty parts so that inadvertent use of these segments
will crash.

Signed-off-by: Andy Lutomirski 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman

selftests/x86/mov_ss_trap: Fix the SYSENTER test

2019-11-29T09:09:58+00:00

commit 8caa016bfc129f2c925d52da43022171d1d1de91 upstream.

For reasons that I haven't quite fully diagnosed, running
mov_ss_trap_32 on a 32-bit kernel results in an infinite loop in
userspace.  This appears to be because the hacky SYSENTER test
doesn't segfault as desired; instead it corrupts the program state
such that it infinite loops.

Fix it by explicitly clearing EBP before doing SYSENTER.  This will
give a more reliable segfault.

Fixes: 59c2a7226fc5 ("x86/selftests: Add mov_to_ss test")
Signed-off-by: Andy Lutomirski 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman

x86/insn: Fix awk regexp warnings

2019-11-29T09:09:45+00:00

commit 700c1018b86d0d4b3f1f2d459708c0cdf42b521d upstream.

gawk 5.0.1 generates the following regexp warnings:

  GEN      /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c
  awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator
  awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is  not a known regexp operator

Ealier versions of gawk are not known to generate these warnings. The
gawk manual referenced below does not list characters ':' and '&' as
needing escaping, so 'unescape' them. See

  https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html

for more info.

Running diff on the output generated by the script before and after
applying the patch reported no differences.

 [ bp: Massage commit message. ]

[ Caught the respective tools header discrepancy. ]
Reported-by: kbuild test robot 
Signed-off-by: Alexander Kapshuk 
Signed-off-by: Borislav Petkov 
Acked-by: Masami Hiramatsu 
Cc: "H. Peter Anvin" 
Cc: "Peter Zijlstra (Intel)" 
Cc: Arnaldo Carvalho de Melo 
Cc: Ingo Molnar 
Cc: Josh Poimboeuf 
Cc: Thomas Gleixner 
Cc: x86-ml 
Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com
Signed-off-by: Greg Kroah-Hartman

Merge tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2019-11-21T20:01:30+00:00

Pull GPIO fixes from Linus Walleij:
 "A last set of small fixes for GPIO, this cycle was quite busy.

   - Fix debounce delays on the MAX77620 GPIO expander

   - Use the correct unit for debounce times on the BD70528 GPIO expander

   - Get proper deps for parallel builds of the GPIO tools

   - Add a specific ACPI quirk for the Terra Pad 1061"

* tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist
  tools: gpio: Correctly add make dependencies for gpio_utils
  gpio: bd70528: Use correct unit for debounce times
  gpio: max77620: Fixup debounce delays

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-11-16T23:52:00+00:00

Pull networking fixes from David Miller:

 1) Fix memory leak in xfrm_state code, from Steffen Klassert.

 2) Fix races between devlink reload operations and device
    setup/cleanup, from Jiri Pirko.

 3) Null deref in NFC code, from Stephan Gerhold.

 4) Refcount fixes in SMC, from Ursula Braun.

 5) Memory leak in slcan open error paths, from Jouni Hogander.

 6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.

 7) Info leak on short USB request answers in ax88172a driver, from
    Oliver Neukum.

 8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.

 9) PTP config timestamp flags validation, from Richard Cochran.

10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.

11) Missing free_netdev() in gemini driver, from Chuhong Yuan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
  ipmr: Fix skb headroom in ipmr_get_route().
  net: hns3: cleanup of stray struct hns3_link_mode_mapping
  net/smc: fix fastopen for non-blocking connect()
  rds: ib: update WR sizes when bringing up connection
  net: gemini: add missed free_netdev
  net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
  seg6: fix skb transport_header after decap_and_validate()
  seg6: fix srh pointer in get_srh()
  net: stmmac: Use the correct style for SPDX License Identifier
  octeontx2-af: Use the correct style for SPDX License Identifier
  ptp: Extend the test program to check the external time stamp flags.
  mlx5: Reject requests to enable time stamping on both edges.
  igb: Reject requests that fail to enable time stamping on both edges.
  dp83640: Reject requests to enable time stamping on both edges.
  mv88e6xxx: Reject requests to enable time stamping on both edges.
  ptp: Introduce strict checking of external time stamp options.
  renesas: reject unsupported external timestamp flags
  mlx5: reject unsupported external timestamp flags
  igb: reject unsupported external timestamp flags
  dp83640: reject unsupported external timestamp flags
  ...

ptp: Extend the test program to check the external time stamp flags.

2019-11-15T20:48:33+00:00

Because each driver and hardware has different capabilities, the test
cannot provide a simple pass/fail result, but it can at least show what
combinations of flags are supported.

Signed-off-by: Richard Cochran 
Signed-off-by: David S. Miller

selftests: mlxsw: Adjust test to recent changes

2019-11-15T20:14:38+00:00

mlxsw does not support VXLAN devices with a physical device attached and
vetoes such configurations upon enslavement to an offloaded bridge.

Commit 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
changed the VXLAN device to be an upper of the physical device which
causes mlxsw to veto the creation of the VXLAN device with "Unknown
upper device type".

This is OK as this configuration is not supported, but it prevents us
from testing bad flows involving the enslavement of VXLAN devices with a
physical device to a bridge, regardless if the physical device is an
mlxsw netdev or not.

Adjust the test to use a dummy device as a physical device instead of a
mlxsw netdev.

Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Signed-off-by: Ido Schimmel 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller

selftests: kvm: fix build with glibc >= 2.30

2019-11-13T14:48:00+00:00

Glibc-2.30 gained gettid() wrapper, selftests fail to compile:

lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration
   58 | static pid_t gettid(void)
      |              ^~~~~~
In file included from /usr/include/unistd.h:1170,
                 from include/test_util.h:18,
                 from lib/assert.c:10:
/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
   34 | extern __pid_t gettid (void) __THROW;
      |                ^~~~~~

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: Paolo Bonzini

tools: gpio: Correctly add make dependencies for gpio_utils

2019-11-13T12:46:04+00:00

gpio tools fail to build correctly with make parallelization:

$ make -s -j24
ld: gpio-utils.o: file not recognized: file truncated
make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:145: lsgpio-in.o] Error 1
make: *** [Makefile:43: lsgpio-in.o] Error 2
make: *** Waiting for unfinished jobs....

This is because gpio-utils.o is used across multiple targets.
Fix this by making gpio-utios.o a proper dependency.

Cc: 
Signed-off-by: Laura Abbott 
Signed-off-by: Bartosz Golaszewski