linux-stable.git/tools, branch v5.10.243

selftests: mptcp: pm: check flush doesn't reset limits

2025-08-28T14:22:58+00:00

commit 452690be7de2f91cc0de68cb9e95252875b33503 upstream.

This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.

To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau 
Signed-off-by: Matthieu Baerts (NGI0) 
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski 
[ Conflicts in pm_netlink.sh, because some refactoring have been done
  later on: commit 3188309c8ceb ("selftests: mptcp: netlink:
  add 'limits' helpers") and commit c99d57d0007a ("selftests: mptcp: use
  pm_nl endpoint ops") are not in this version. The same operation can
  still be done at the same place, without using the new helper. ]
Signed-off-by: Matthieu Baerts (NGI0) 
Signed-off-by: Greg Kroah-Hartman

selftests/memfd: add test for mapping write-sealed memfd read-only

2025-08-28T14:22:55+00:00

[ Upstream commit ea0916e01d0b0f2cce1369ac1494239a79827270 ]

Now we have reinstated the ability to map F_SEAL_WRITE mappings read-only,
assert that we are able to do this in a test to ensure that we do not
regress this again.

Link: https://lkml.kernel.org/r/a6377ec470b14c0539b4600cf8fa24bf2e4858ae.1732804776.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes 
Cc: Jann Horn 
Cc: Julian Orth 
Cc: Liam R. Howlett 
Cc: Linus Torvalds 
Cc: Shuah Khan 
Cc: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Cc: stable@vger.kernel.org
Signed-off-by: Isaac J. Manjarres 
Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: connect: also cover alt modes

2025-08-28T14:22:52+00:00

commit 37848a456fc38c191aedfe41f662cc24db8c23d9 upstream.

The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.

The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.

To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.

Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang 
Signed-off-by: Matthieu Baerts (NGI0) 
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski 
[ Drop userspace_pm.sh from TEST_PROGS ]
Signed-off-by: Sasha Levin 
[ Drop mptcp_sockopt.sh from TEST_PROGS, and drop "sendfile" which is
  not supported in this version. ]
Signed-off-by: Matthieu Baerts (NGI0) 
Signed-off-by: Greg Kroah-Hartman

ktest.pl: Prevent recursion of default variable options

2025-08-28T14:22:42+00:00

[ Upstream commit 61f7e318e99d3b398670518dd3f4f8510d1800fc ]

If a default variable contains itself, do not recurse on it.

For example:

  ADD_CONFIG := ${CONFIG_DIR}/temp_config
  DEFAULTS
  ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}

The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:

  # ADD_CONFIG := ${CONFIG_DIR}/temp_config
  DEFAULTS
  ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}

Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.

When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.

Cc: "John Warthog9 Hawley" 
Cc: Dhaval Giani 
Cc: Greg KH 
Link: https://lore.kernel.org/20250718202053.732189428@kernel.org
Signed-off-by: Steven Rostedt 
Signed-off-by: Sasha Levin

pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()

2025-08-28T14:22:42+00:00

[ Upstream commit cda7ac8ce7de84cf32a3871ba5f318aa3b79381e ]

In the function mperf_start(), mperf_monitor snapshots the time, tsc
and finally the aperf,mperf MSRs. However, this order of snapshotting
in is reversed in mperf_stop(). As a result, the C0 residency (which
is computed as delta_mperf * 100 / delta_tsc) is under-reported on
CPUs that is 100% busy.

Fix this by snapshotting time, tsc and then aperf,mperf in
mperf_stop() in the same order as in mperf_start().

Link: https://lore.kernel.org/r/20250612122355.19629-2-gautham.shenoy@amd.com
Signed-off-by: Gautham R. Shenoy 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests: tracing: Use mutex_unlock for testing glob filter

2025-08-28T14:22:41+00:00

[ Upstream commit a089bb2822a49b0c5777a8936f82c1f8629231fb ]

Since commit c5b6ababd21a ("locking/mutex: implement
mutex_trylock_nested") makes mutex_trylock() as an inlined
function if CONFIG_DEBUG_LOCK_ALLOC=y, we can not use
mutex_trylock() for testing the glob filter of ftrace.

Use mutex_unlock instead.

Link: https://lore.kernel.org/r/175151680309.2149615.9795104805153538717.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) 
Acked-by: Steven Rostedt (Google) 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t

2025-08-28T14:22:40+00:00

[ Upstream commit 04850819c65c8242072818655d4341e70ae998b5 ]

The kernel does not provide sys_futex() on 32-bit architectures that do not
support 32-bit time representations, such as riscv32.

As a result, glibc cannot define SYS_futex, causing compilation failures in
tests that rely on this syscall. Define SYS_futex as SYS_futex_time64 in
such cases to ensure successful compilation and compatibility.

Signed-off-by: Cynthia Huang 
Signed-off-by: Ben Zong-You Xie 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Muhammad Usama Anjum 
Link: https://lore.kernel.org/all/20250710103630.3156130-1-ben717@andestech.com
Signed-off-by: Sasha Levin

XArray: Add calls to might_alloc()

2025-08-28T14:22:37+00:00

[ Upstream commit 1dd685c414a7b9fdb3d23aca3aedae84f0b998ae ]

Catch bogus GFP flags deterministically, instead of occasionally
when we actually have to allocate memory.

Reported-by: Nikolay Borisov 
Signed-off-by: Matthew Wilcox (Oracle) 
Stable-dep-of: 99765233ab42 ("NFS: Fixup allocation flags for nfsiod's __GFP_NORETRY")
Signed-off-by: Sasha Levin

perf tests bp_account: Fix leaked file descriptor

2025-08-28T14:22:34+00:00

[ Upstream commit 4a6cdecaa1497f1fbbd1d5307a225b6ca5a62a90 ]

Since the commit e9846f5ead26 ("perf test: In forked mode add check that
fds aren't leaked"), the test "Breakpoint accounting" reports the error:

  # perf test -vvv "Breakpoint accounting"
  20: Breakpoint accounting:
  --- start ---
  test child forked, pid 373
  failed opening event 0
  failed opening event 0
  watchpoints count 4, breakpoints count 6, has_ioctl 1, share 0
  wp 0 created
  wp 1 created
  wp 2 created
  wp 3 created
  wp 0 modified to bp
  wp max created
  ---- end(0) ----
  Leak of file descriptor 7 that opened: 'anon_inode:[perf_event]'

A watchpoint's file descriptor was not properly released. This patch
fixes the leak.

Fixes: 032db28e5fa3 ("perf tests: Add breakpoint accounting/modify test")
Reported-by: Aishwarya TCV 
Signed-off-by: Leo Yan 
Reviewed-by: Ian Rogers 
Link: https://lore.kernel.org/r/20250711-perf_fix_breakpoint_accounting-v1-1-b314393023f9@arm.com
Signed-off-by: Namhyung Kim 
Signed-off-by: Sasha Levin

selftests: rtnetlink.sh: remove esp4_offload after test

2025-08-28T14:22:33+00:00

[ Upstream commit 5b32321fdaf3fd1a92ec726af18765e225b0ee2b ]

The esp4_offload module, loaded during IPsec offload tests, should
be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence
test cases by keeping offload active.

Without this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
esp4_offload           12288  0
esp4                   32768  1 esp4_offload

With this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload

Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Xiumei Mu 
Reviewed-by: Shannon Nelson 
Reviewed-by: Hangbin Liu 
Link: https://patch.msgid.link/6d3a1d777c4de4eb0ca94ced9e77be8d48c5b12f.1753415428.git.xmu@redhat.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin