linux-stable.git/tools, branch v5.1.9 Linux kernel stable tree selftests/tls: add test for sleeping even though there is data 2019-06-04T05:59:44+00:00 Jakub Kicinski jakub.kicinski@netronome.com 2019-05-24T17:34:33+00:00 9904c83d0c50ca46a61a45f52fcddca6c5ea9d95 [ Upstream commit 043556d0917a1a5ea58795fe1656a2bce06d2649 ] Add a test which sends 15 bytes of data, and then tries to read 10 byes twice. Previously the second read would sleep indifinitely, since the record was already decrypted and there is only 5 bytes left, not full 10. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 043556d0917a1a5ea58795fe1656a2bce06d2649 ]

Add a test which sends 15 bytes of data, and then tries
to read 10 byes twice.  Previously the second read would
sleep indifinitely, since the record was already decrypted
and there is only 5 bytes left, not full 10.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
selftests/tls: test for lowat overshoot with multiple records 2019-06-04T05:59:44+00:00 Jakub Kicinski jakub.kicinski@netronome.com 2019-05-24T17:34:31+00:00 2e87b8853672f8a1b1fd9e7c59c2a853a723a94a [ Upstream commit 7718a855cd7ae9fc27a2aa1532ee105d52eb7634 ] Set SO_RCVLOWAT and test it gets respected when gathering data from multiple records. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 7718a855cd7ae9fc27a2aa1532ee105d52eb7634 ]

Set SO_RCVLOWAT and test it gets respected when gathering
data from multiple records.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
selftests/bpf: ksym_search won't check symbols exists 2019-05-31T13:43:38+00:00 Daniel T. Lee danieltimlee@gmail.com 2019-04-03T22:17:55+00:00 f382ab1afe260e60dc555619e5d196aa52afaa10 [ Upstream commit 0979ff7992fb6f4eb837995b12f4071dcafebd2d ] Currently, ksym_search located at trace_helpers won't check symbols are existing or not. In ksym_search, when symbol is not found, it will return &syms[0](_stext). But when the kernel symbols are not loaded, it will return NULL, which is not a desired action. This commit will add verification logic whether symbols are loaded prior to the symbol search. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0979ff7992fb6f4eb837995b12f4071dcafebd2d ]

Currently, ksym_search located at trace_helpers won't check symbols are
existing or not.

In ksym_search, when symbol is not found, it will return &syms[0](_stext).
But when the kernel symbols are not loaded, it will return NULL, which is
not a desired action.

This commit will add verification logic whether symbols are loaded prior
to the symbol search.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
selftests: cgroup: fix cleanup path in test_memcg_subtree_control() 2019-05-31T13:43:35+00:00 Roman Gushchin guro@fb.com 2019-04-08T22:12:30+00:00 930d69e957979cb4dd52baf2be667f07e25d9762 [ Upstream commit e14d314c7a489f060d6d691866fef5f131281718 ] Dan reported, that cleanup path in test_memcg_subtree_control() triggers a static checker warning: ./tools/testing/selftests/cgroup/test_memcontrol.c:76 \ test_memcg_subtree_control() error: uninitialized symbol 'child2'. Fix this by initializing child2 and parent2 variables and split the cleanup path into few stages. Signed-off-by: Roman Gushchin <guro@fb.com> Fixes: 84092dbcf901 ("selftests: cgroup: add memory controller self-tests") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e14d314c7a489f060d6d691866fef5f131281718 ]

Dan reported, that cleanup path in test_memcg_subtree_control()
triggers a static checker warning:
  ./tools/testing/selftests/cgroup/test_memcontrol.c:76 \
  test_memcg_subtree_control()
  error: uninitialized symbol 'child2'.

Fix this by initializing child2 and parent2 variables and
split the cleanup path into few stages.

Signed-off-by: Roman Gushchin <guro@fb.com>
Fixes: 84092dbcf901 ("selftests: cgroup: add memory controller self-tests")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
libbpf: fix samples/bpf build failure due to undefined UINT32_MAX 2019-05-31T13:43:22+00:00 Daniel T. Lee danieltimlee@gmail.com 2019-04-23T20:24:56+00:00 f1df511d34aec569b618e5da080dafb734e8b723 [ Upstream commit 32e621e55496a0009f44fe4914cd4a23cade4984 ] Currently, building bpf samples will cause the following error. ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) .. #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */ ^ ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE' extern char bpf_log_buf[BPF_LOG_BUF_SIZE]; ^~~~~~~~~~~~~~~~ Due to commit 4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error") hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is defined in <stdint.h> header. Even with this change, bpf selftests are running fine since these are built with clang and it includes header(-idirafter) from clang/6.0.0/include. (it has <stdint.h>) clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \ -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \ -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o But bpf samples are compiled with GCC, and it only searches and includes headers declared at the target file. As '#include <stdint.h>' hasn't been declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples. gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \ -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \ -I./tools/ lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c; This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h to fix this problem. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 32e621e55496a0009f44fe4914cd4a23cade4984 ]

Currently, building bpf samples will cause the following error.

    ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) ..
     #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */
                               ^
    ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE'
     extern char bpf_log_buf[BPF_LOG_BUF_SIZE];
                             ^~~~~~~~~~~~~~~~

Due to commit 4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error")
hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is
defined in <stdint.h> header.

Even with this change, bpf selftests are running fine since these are built
with clang and it includes header(-idirafter) from clang/6.0.0/include.
(it has <stdint.h>)

    clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \
    -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \
    -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \
    llc -march=bpf -mcpu=generic  -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o

But bpf samples are compiled with GCC, and it only searches and includes
headers declared at the target file. As '#include <stdint.h>' hasn't been
declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples.

    gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \
    -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \
    -I./tools/  lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c;

This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h
to fix this problem.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpftool: exclude bash-completion/bpftool from .gitignore pattern 2019-05-31T13:43:15+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2019-05-01T13:45:59+00:00 16e03948c954ebbec44623da4193e263837d80ae [ Upstream commit a7d006714724de4334c5e3548701b33f7b12ca96 ] tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is intended to ignore the following build artifact: tools/bpf/bpftool/bpftool However, the .gitignore entry is effective not only for the current directory, but also for any sub-directories. So, from the point of .gitignore grammar, the following check-in file is also considered to be ignored: tools/bpf/bpftool/bash-completion/bpftool As the manual gitignore(5) says "Files already tracked by Git are not affected", this is not a problem as far as Git is concerned. However, Git is not the only program that parses .gitignore because .gitignore is useful to distinguish build artifacts from source files. For example, tar(1) supports the --exclude-vcs-ignore option. As of writing, this option does not work perfectly, but it intends to create a tarball excluding files specified by .gitignore. So, I believe it is better to fix this issue. You can fix it by prefixing the pattern with a slash; the leading slash means the specified pattern is relative to the current directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a7d006714724de4334c5e3548701b33f7b12ca96 ]

tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:

  tools/bpf/bpftool/bpftool

However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.

So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:

  tools/bpf/bpftool/bash-completion/bpftool

As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.

However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.

For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.

So, I believe it is better to fix this issue.

You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c 2019-05-31T13:43:14+00:00 Yonghong Song yhs@fb.com 2019-04-29T23:59:38+00:00 85af86c03dbbad3e0549c21abcff5c993500318c [ Upstream commit 6cea33701eb024bc6c920ab83940ee22afd29139 ] Test test_libbpf.sh failed on my development server with failure -bash-4.4$ sudo ./test_libbpf.sh [0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1). Couldn't load basic 'r0 = 0' BPF program. test_libbpf: failed at file test_l4lb.o selftests: test_libbpf [FAILED] -bash-4.4$ The reason is because my machine has 64KB locked memory by default which is not enough for this program to get locked memory. Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK to infinity, which fixed the issue. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6cea33701eb024bc6c920ab83940ee22afd29139 ]

Test test_libbpf.sh failed on my development server with failure
  -bash-4.4$ sudo ./test_libbpf.sh
  [0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
      Couldn't load basic 'r0 = 0' BPF program.
  test_libbpf: failed at file test_l4lb.o
  selftests: test_libbpf [FAILED]
  -bash-4.4$

The reason is because my machine has 64KB locked memory by default which
is not enough for this program to get locked memory.
Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK
to infinity, which fixed the issue.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
libbpf: fix invalid munmap call 2019-05-31T13:43:14+00:00 Björn Töpel bjorn.topel@intel.com 2019-04-30T12:45:35+00:00 4b9c2fdd672b7a55fed68300b61e58a5e6ab820b [ Upstream commit 0e6741f092979535d159d5a851f12c88bfb7cb9a ] When unmapping the AF_XDP memory regions used for the rings, an invalid address was passed to the munmap() calls. Instead of passing the beginning of the memory region, the descriptor region was passed to munmap. When the userspace application tried to tear down an AF_XDP socket, the operation failed and the application would still have a reference to socket it wished to get rid of. Reported-by: William Tu <u9012063@gmail.com> Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0e6741f092979535d159d5a851f12c88bfb7cb9a ]

When unmapping the AF_XDP memory regions used for the rings, an
invalid address was passed to the munmap() calls. Instead of passing
the beginning of the memory region, the descriptor region was passed
to munmap.

When the userspace application tried to tear down an AF_XDP socket,
the operation failed and the application would still have a reference
to socket it wished to get rid of.

Reported-by: William Tu <u9012063@gmail.com>
Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tools/bpf: fix perf build error with uClibc (seen on ARC) 2019-05-31T13:43:14+00:00 Vineet Gupta Vineet.Gupta1@synopsys.com 2019-05-02T15:56:50+00:00 36cd1815fd109860ec7681e41508146cd32d9b26 [ Upstream commit ca31ca8247e2d3807ff5fa1d1760616a2292001c ] When build perf for ARC recently, there was a build failure due to lack of __NR_bpf. | Auto-detecting system features: | | ... get_cpuid: [ OFF ] | ... bpf: [ on ] | | # error __NR_bpf not defined. libbpf does not support your arch. ^~~~~ | bpf.c: In function 'sys_bpf': | bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function) | return syscall(__NR_bpf, cmd, attr, size); | ^~~~~~~~ | sys_bpf Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ca31ca8247e2d3807ff5fa1d1760616a2292001c ]

When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.

| Auto-detecting system features:
|
| ...                     get_cpuid: [ OFF ]
| ...                           bpf: [ on  ]
|
| #  error __NR_bpf not defined. libbpf does not support your arch.
    ^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
|  return syscall(__NR_bpf, cmd, attr, size);
|                 ^~~~~~~~
|                 sys_bpf

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
objtool: Allow AR to be overridden with HOSTAR 2019-05-25T16:16:39+00:00 Nathan Chancellor natechancellor@gmail.com 2019-05-16T17:49:42+00:00 30e61ff2385543b8270581cbc5cff4792229ab42 commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream. Currently, this Makefile hardcodes GNU ar, meaning that if it is not available, there is no way to supply a different one and the build will fail. $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \ HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare ... AR /out/tools/objtool/libsubcmd.a /bin/sh: 1: ar: not found ... Follow the logic of HOST{CC,LD} and allow the user to specify a different ar tool via HOSTAR (which is used elsewhere in other tools/ Makefiles). Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com Link: https://github.com/ClangBuiltLinux/linux/issues/481 Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream.

Currently, this Makefile hardcodes GNU ar, meaning that if it is not
available, there is no way to supply a different one and the build will
fail.

  $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \
         HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare
  ...
    AR       /out/tools/objtool/libsubcmd.a
  /bin/sh: 1: ar: not found
  ...

Follow the logic of HOST{CC,LD} and allow the user to specify a
different ar tool via HOSTAR (which is used elsewhere in other
tools/ Makefiles).

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com
Link: https://github.com/ClangBuiltLinux/linux/issues/481
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>