linux-stable.git/tools, branch v4.9.216

perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etc

2020-03-11T06:53:08+00:00

commit 3f7774033e6820d25beee5cf7aefa11d4968b951 upstream.

We need to set actions->ms.map since 599a2f38a989 ("perf hists browser:
Check sort keys before hot key actions"), as in that patch we bail out
if map is NULL.

Reviewed-by: Jiri Olsa 
Cc: Adrian Hunter 
Cc: Namhyung Kim 
Fixes: 599a2f38a989 ("perf hists browser: Check sort keys before hot key actions")
Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

x86/decoder: Add TEST opcode to Group3-2

2020-02-28T14:42:36+00:00

[ Upstream commit 8b7e20a7ba54836076ff35a28349dabea4cec48f ]

Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.

Commit

  12a78d43de76 ("x86/decoder: Add new TEST instruction pattern")

added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did
not add f7 XX/001/XXX (Group 3-2).

Actually, this TEST opcode variant (ModRM.reg /1) is not described in
the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3,
Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.

Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.

    HOSTCC  arch/x86/tools/insn_decoder_test
    HOSTCC  arch/x86/tools/insn_sanity
    TEST    posttest
  arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
  arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1:	f7 0b 00 01 08 00    	testl  $0x80100,(%rbx)
  arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2
  arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures
    TEST    posttest
  arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)

To fix this error, add the TEST opcode according to AMD64 APM Vol.3.

 [ bp: Massage commit message. ]

Reported-by: Randy Dunlap 
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Borislav Petkov 
Acked-by: Randy Dunlap 
Tested-by: Randy Dunlap 
Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
Signed-off-by: Sasha Levin

usbip: Fix unsafe unaligned pointer usage

2020-02-28T14:42:29+00:00

[ Upstream commit 585c91f40d201bc564d4e76b83c05b3b5363fe7e ]

Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool
build fails with new gcc -Werror=address-of-packed-member checks.

usbip_network.c: In function ‘usbip_net_pack_usb_device’:
usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
   79 |  usbip_net_pack_uint32_t(pack, &udev->busnum);

Fix with minor changes to pass by value instead of by address.

Signed-off-by: Shuah Khan 
Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tools lib api fs: Fix gcc9 stringop-truncation compilation error

2020-02-28T14:42:29+00:00

[ Upstream commit 6794200fa3c9c3e6759dae099145f23e4310f4f7 ]

GCC9 introduced string hardening mechanisms, which exhibits the error
during fs api compilation:

error: '__builtin_strncpy' specified bound 4096 equals destination size
[-Werror=stringop-truncation]

This comes when the length of copy passed to strncpy is is equal to
destination size, which could potentially lead to buffer overflow.

There is a need to mitigate this potential issue by limiting the size of
destination by 1 and explicitly terminate the destination with NULL.

Signed-off-by: Andrey Zhizhikin 
Reviewed-by: Petr Mladek 
Acked-by: Jiri Olsa 
Cc: Alexei Starovoitov 
Cc: Andrii Nakryiko 
Cc: Daniel Borkmann 
Cc: Kefeng Wang 
Cc: Martin KaFai Lau 
Cc: Petr Mladek 
Cc: Sergey Senozhatsky 
Cc: Song Liu 
Cc: Yonghong Song 
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

tools/power/acpi: fix compilation error

2020-02-14T21:31:09+00:00

commit 1985f8c7f9a42a651a9750d6fcadc74336d182df upstream.

If we compile tools/acpi target in the top source directory, we'd get a
compilation error showing as bellow:

	# make tools/acpi
	  DESCEND  power/acpi
	  DESCEND  tools/acpidbg
	  CC       tools/acpidbg/acpidbg.o
	Assembler messages:
	Fatal error: can't create /home/lzy/kernel-upstream/power/acpi/\
			tools/acpidbg/acpidbg.o: No such file or directory
	../../Makefile.rules:26: recipe for target '/home/lzy/kernel-upstream/\
			power/acpi/tools/acpidbg/acpidbg.o' failed
	make[3]: *** [/home/lzy/kernel-upstream//power/acpi/tools/acpidbg/\
			acpidbg.o] Error 1
	Makefile:19: recipe for target 'acpidbg' failed
	make[2]: *** [acpidbg] Error 2
	Makefile:54: recipe for target 'acpi' failed
	make[1]: *** [acpi] Error 2
	Makefile:1607: recipe for target 'tools/acpi' failed
	make: *** [tools/acpi] Error 2

Fixes: d5a4b1a540b8 ("tools/power/acpi: Remove direct kernel source include reference")
Signed-off-by: Zhengyuan Liu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

tools lib: Fix builds when glibc contains strlcpy()

2020-02-05T13:05:44+00:00

commit 6c4798d3f08b81c2c52936b10e0fa872590c96ae upstream.

Disable a couple of compilation warnings (which are treated as errors)
on strlcpy() definition and declaration, allowing users to compile perf
and kernel (objtool) when:

1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and
   perf build fails with this (in gcc):

  In file included from exec-cmd.c:3:
  tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls]
     20 | extern size_t strlcpy(char *dest, const char *src, size_t size);

2. clang ignores `-Wredundant-decls', but produces another warning when
   building perf:

    CC       util/string.o
  ../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
  size_t __weak strlcpy(char *dest, const char *src, size_t size)
  ../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak'
  # define __weak                 __attribute__((weak))
  /usr/include/bits/string_fortified.h:151:8: note: previous definition is here
  __NTH (strlcpy (char *__restrict __dest, const char *__restrict __src,

Committer notes:

The

 #pragma GCC diagnostic

directive was introduced in gcc 4.6, so check for that as well.

Fixes: ce99091 ("perf tools: Move strlcpy() from perf to tools/lib/string.c")
Fixes: 0215d59 ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__")
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481
Signed-off-by: Vitaly Chikunov 
Reviewed-by: Dmitry Levin 
Cc: Dmitry Levin 
Cc: Josh Poimboeuf 
Cc: kbuild test robot 
Cc: Peter Zijlstra 
Cc: stable@vger.kernel.org
Cc: Vineet Gupta 
Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf probe: Fix wrong address verification

2020-01-23T07:19:43+00:00

commit 07d369857808b7e8e471bbbbb0074a6718f89b31 upstream.

Since there are some DIE which has only ranges instead of the
combination of entrypc/highpc, address verification must use
dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc.

Also, the ranges only DIE will have a partial code in different section
(e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In
that case, we can not use dwarf_entrypc() or die_entrypc(), because the
offset from original DIE can be a minus value.

Instead, this simply gets the symbol and offset from symtab.

Without this patch;

  # perf probe -D clear_tasks_mm_cpumask:1
  Failed to get entry address of clear_tasks_mm_cpumask
    Error: Failed to add events.

And with this patch:

  # perf probe -D clear_tasks_mm_cpumask:1
  p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0
  p:probe/clear_tasks_mm_cpumask_1 clear_tasks_mm_cpumask+5
  p:probe/clear_tasks_mm_cpumask_2 clear_tasks_mm_cpumask+8
  p:probe/clear_tasks_mm_cpumask_3 clear_tasks_mm_cpumask+16
  p:probe/clear_tasks_mm_cpumask_4 clear_tasks_mm_cpumask+82

Committer testing:

I managed to reproduce the above:

  [root@quaco ~]# perf probe -D clear_tasks_mm_cpumask:1
  p:probe/clear_tasks_mm_cpumask _text+919968
  p:probe/clear_tasks_mm_cpumask_1 _text+919973
  p:probe/clear_tasks_mm_cpumask_2 _text+919976
  [root@quaco ~]#

But then when trying to actually put the probe in place, it fails if I
use :0 as the offset:

  [root@quaco ~]# perf probe -L clear_tasks_mm_cpumask | head -5
  
        0  void clear_tasks_mm_cpumask(int cpu)
        1  {
        2  	struct task_struct *p;

  [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0
  Probe point 'clear_tasks_mm_cpumask' not found.
    Error: Failed to add events.
  [root@quaco

The next patch is needed to fix this case.

Fixes: 576b523721b7 ("perf probe: Fix probing symbols with optimization suffix")
Reported-by: Arnaldo Carvalho de Melo 
Tested-by: Arnaldo Carvalho de Melo 
Signed-off-by: Masami Hiramatsu 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: http://lore.kernel.org/lkml/157199318513.8075.10463906803299647907.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf report: Fix incorrectly added dimensions as switch perf data file

2020-01-23T07:19:40+00:00

commit 0feba17bd7ee3b7e03d141f119049dcc23efa94e upstream.

We observed an issue that was some extra columns displayed after switching
perf data file in browser. The steps to reproduce:

1. perf record -a -e cycles,instructions -- sleep 3
2. perf report --group
3. In browser, we use hotkey 's' to switch to another perf.data
4. Now in browser, the extra columns 'Self' and 'Children' are displayed.

The issue is setup_sorting() executed again after repeat path, so dimensions
are added again.

This patch checks the last key returned from __cmd_report(). If it's
K_SWITCH_INPUT_DATA, skips the setup_sorting().

Fixes: ad0de0971b7f ("perf report: Enable the runtime switching of perf data file")
Signed-off-by: Jin Yao 
Tested-by: Arnaldo Carvalho de Melo 
Acked-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Andi Kleen 
Cc: Feng Tang 
Cc: Jin Yao 
Cc: Kan Liang 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf hists: Fix variable name's inconsistency in hists__for_each() macro

2020-01-23T07:19:40+00:00

commit 55347ec340af401437680fd0e88df6739a967f9f upstream.

Variable names are inconsistent in hists__for_each macro().

Due to this inconsistency, the macro replaces its second argument with
"fmt" regardless of its original name.

So far it works because only "fmt" is passed to the second argument.
However, this behavior is not expected and should be fixed.

Fixes: f0786af536bb ("perf hists: Introduce hists__for_each_format macro")
Fixes: aa6f50af822a ("perf hists: Introduce hists__for_each_sort_list macro")
Signed-off-by: Yuya Fujita 
Acked-by: Jiri Olsa 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/OSAPR01MB1588E1C47AC22043175DE1B2E8520@OSAPR01MB1588.jpnprd01.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

rseq/selftests: Turn off timeout setting

2020-01-23T07:19:37+00:00

[ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ]

As the rseq selftests can run for a long period of time, disable the
timeout that the general selftests have.

Signed-off-by: Mathieu Desnoyers 
Cc: Shuah Khan 
Cc: Thomas Gleixner 
Cc: Peter Zijlstra (Intel) 
Cc: "Paul E. McKenney" 
Cc: Boqun Feng 
Cc: "H . Peter Anvin" 
Cc: Paul Turner 
Cc: Dmitry Vyukov 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin