linux-stable.git/tools, branch v4.18.17

net/ipv6: Allow onlink routes to have a device mismatch if it is the default route

2018-11-04T13:51:54+00:00

[ Upstream commit 4ed591c8ab44e711e56b8e021ffaf4f407c045f5 ]

The intent of ip6_route_check_nh_onlink is to make sure the gateway
given for an onlink route is not actually on a connected route for
a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then
an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway
lookup hits the default route then it most likely will be a different
interface than the onlink route which is ok.

Update ip6_route_check_nh_onlink to disregard the device mismatch
if the gateway lookup hits the default route. Turns out the existing
onlink tests are passing because there is no default route or it is
an unreachable default, so update the onlink tests to have a default
route other than unreachable.

Fixes: fc1e64e1092f6 ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

perf tools: Disable parallelism for 'make clean'

2018-11-04T13:51:51+00:00

[ Upstream commit da15fc2fa9c07b23db8f5e479bd8a9f0d741ca07 ]

The Yocto build system does a 'make clean' when rebuilding due to
changed dependencies, and that consistently fails for me (causing the
whole BSP build to fail) with errors such as

| find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory
| find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory
| find: find: '[...]/perf/1.0-r9/perf-1.0/libtraceevent.a''[...]/perf/1.0-r9/perf-1.0/libtraceevent.a': No such file or directory: No such file or directory
|
[...]
| find: cannot delete '/mnt/xfs/devel/pil/yocto/tmp-glibc/work/wandboard-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/util/.pstack.o.cmd': No such file or directory

Apparently (despite the comment), 'make clean' ends up launching
multiple sub-makes that all want to remove the same things - perhaps
this only happens in combination with a O=... parameter. In any case, we
don't lose much by explicitly disabling the parallelism for the clean
target, and it makes automated builds much more reliable.

Signed-off-by: Rasmus Villemoes 
Acked-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20180705131527.19749-1-linux@rasmusvillemoes.dk
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

selftests: udpgso_bench.sh explicitly requires bash

2018-11-04T13:51:50+00:00

[ Upstream commit 12a2ea962c06efb30764c47b140d2ec9d3cd7cb0 ]

The udpgso_bench.sh script requires several bash-only features. This
may cause random failures if the default shell is not bash.
Address the above explicitly requiring bash as the script interpreter

Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Paolo Abeni 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

selftests: rtnetlink.sh explicitly requires bash.

2018-11-04T13:51:50+00:00

[ Upstream commit 3c718e677c2b35b449992adc36ecce883c467e98 ]

the script rtnetlink.sh requires a bash-only features (sleep with sub-second
precision). This may cause random test failure if the default shell is not
bash.
Address the above explicitly requiring bash as the script interpreter.

Fixes: 33b01b7b4f19 ("selftests: add rtnetlink test script")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

perf record: Use unmapped IP for inline callchain cursors

2018-11-04T13:51:49+00:00

[ Upstream commit 7a8a8fcf7b860e4b2d4edc787c844d41cad9dfcf ]

Only use the mapped IP to find inline frames, but keep using the
unmapped IP for the callchain cursor. This ensures we properly show the
unmapped IP when displaying a frame we received via the
dso__parse_addr_inlines API for a module which does not contain
sufficient debug symbols to show the srcline.

This is another follow-up to commit 19610184693c ("perf script: Show
virtual addresses instead of offsets").

Signed-off-by: Milian Wolff 
Acked-by: Jiri Olsa 
Tested-by: Ravi Bangoria 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Jin Yao 
Cc: Namhyung Kim 
Cc: Sandipan Das 
Fixes: 19610184693c ("perf script: Show virtual addresses instead of offsets")
Link: http://lkml.kernel.org/r/20180926135207.30263-2-milian.wolff@kdab.com
Link: http://lkml.kernel.org/r/20181002073949.3297-1-milian.wolff@kdab.com
[ Squashed a fix from Milian for a problem reported by Ravi, fixed up space damage ]
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf python: Use -Wno-redundant-decls to build with PYTHON=python3

2018-11-04T13:51:49+00:00

[ Upstream commit 05a2f54679861deb188750ba2a70187000b2c71f ]

When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1
it fails with:

    GEN      /tmp/build/perf/python/perf.so
  In file included from /usr/include/python3.7m/Python.h:126,
                   from /git/linux/tools/perf/util/python.c:2:
  /usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls]
   PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *);
                          ^~~~~~~~~~~~~~~~~~~~~~~~~
  /usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here
   PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name,
                          ^~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  error: command 'gcc' failed with exit status 1

And indeed there is a redundant declaration in that Python.h file, one
with parameter names and the other without, so just add
-Wno-error=redundant-decls to the python setup instructions.

Now perf builds with gcc in ClearLinux with the following Dockerfile:

  # docker.io/acmel/linux-perf-tools-build-clearlinux:latest
  FROM docker.io/clearlinux:latest
  MAINTAINER Arnaldo Carvalho de Melo 
  RUN swupd update && \
      swupd bundle-add sysadmin-basic-dev
  RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \
      groupadd -r perfbuilder && \
      useradd -m -r -g perfbuilder perfbuilder && \
      chown -R perfbuilder.perfbuilder /tmp/build/ /git/
  USER perfbuilder
  COPY rx_and_build.sh /
  ENV EXTRA_MAKE_ARGS=PYTHON=python3
  ENTRYPOINT ["/rx_and_build.sh"]

Now to figure out why the build fails with clang, that is present in the
above container as detected by the rx_and_build.sh script:

  clang version 6.0.1 (tags/RELEASE_601/final)
  Target: x86_64-unknown-linux-gnu
  Thread model: posix
  InstalledDir: /usr/sbin
  make: Entering directory '/git/linux/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                      libslang: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]

  Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el].  Stop.
  make[1]: *** [Makefile.perf:206: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2
  make: Leaving directory '/git/linux/tools/perf'

Cc: Adrian Hunter 
Cc: David Ahern 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Thiago Macieira 
Cc: Wang Nan 
Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf report: Don't try to map ip to invalid map

2018-11-04T13:51:48+00:00

[ Upstream commit ff4ce2885af8f9e8e99864d78dbeb4673f089c76 ]

Fixes a crash when the report encounters an address that could not be
associated with an mmaped region:

  #0  0x00005555557bdc4a in callchain_srcline (ip=, sym=0x0, map=0x0) at util/machine.c:2329
  #1  unwind_entry (entry=entry@entry=0x7fffffff9180, arg=arg@entry=0x7ffff5642498) at util/machine.c:2329
  #2  0x00005555558370af in entry (arg=0x7ffff5642498, cb=0x5555557bdb50 , thread=, ip=18446744073709551615) at util/unwind-libunwind-local.c:586
  #3  get_entries (ui=ui@entry=0x7fffffff9620, cb=0x5555557bdb50 , arg=0x7ffff5642498, max_stack=) at util/unwind-libunwind-local.c:703
  #4  0x0000555555837192 in _unwind__get_entries (cb=, arg=, thread=, data=, max_stack=) at util/unwind-libunwind-local.c:725
  #5  0x00005555557c310f in thread__resolve_callchain_unwind (max_stack=127, sample=0x7fffffff9830, evsel=0x555555c7b3b0, cursor=0x7ffff5642498, thread=0x555555c7f6f0) at util/machine.c:2351
  #6  thread__resolve_callchain (thread=0x555555c7f6f0, cursor=0x7ffff5642498, evsel=0x555555c7b3b0, sample=0x7fffffff9830, parent=0x7fffffff97b8, root_al=0x7fffffff9750, max_stack=127) at util/machine.c:2378
  #7  0x00005555557ba4ee in sample__resolve_callchain (sample=, cursor=, parent=parent@entry=0x7fffffff97b8, evsel=, al=al@entry=0x7fffffff9750,
      max_stack=) at util/callchain.c:1085

Signed-off-by: Milian Wolff 
Tested-by: Sandipan Das 
Acked-by: Jiri Olsa 
Cc: Jin Yao 
Cc: Namhyung Kim 
Fixes: 2a9d5050dc84 ("perf script: Show correct offsets for DWARF-based unwinding")
Link: http://lkml.kernel.org/r/20180926135207.30263-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

bpf: test_maps, only support ESTABLISHED socks

2018-10-20T07:47:08+00:00

[ Upstream commit 5028027844cfc6168e39650abecd817ba64c9d98 ]

Ensure that sockets added to a sock{map|hash} that is not in the
ESTABLISHED state is rejected.

Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend 
Acked-by: Yonghong Song 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

selftests: pmtu: properly redirect stderr to /dev/null

2018-10-20T07:47:07+00:00

[ Upstream commit 0a286afee5a1e8dca86d824209dbd3200294f86f ]

The cleanup function uses "$CMD 2 > /dev/null", which doesn't actually
send stderr to /dev/null, so when the netns doesn't exist, the error
message is shown. Use "2> /dev/null" instead, so that those messages
disappear, as was intended.

Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test")
Signed-off-by: Sabrina Dubroca 
Acked-by: Stefano Brivio 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

perf script python: Fix export-to-sqlite.py sample columns

2018-10-18T07:18:18+00:00

commit d005efe18db0b4a123dd92ea8e77e27aee8f99fd upstream.

With the "branches" export option, not all sample columns are exported.
However the unwanted columns are not at the end of the tuple, as assumed
by the code. Fix by taking the first 15 and last 3 values, instead of
the first 18.

Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180911114504.28516-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman