linux-stable.git/tools, branch v4.14.46

Revert "perf record: Fix crash in pipe mode"

2018-05-30T10:19:59+00:00

This reverts commit f766148e47d7d3b8a7128cae511971c0f793e38e which is
commit ad46e48c65fa1f204fa29eaff1b91174d314a94b upstream.

It breaks the build.  Turns out we don't test perf on stable releases,
we need to fix that :(

Reported-by: Pavlos Parissis 
Cc: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: David Ahern 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Cc: Arnaldo Carvalho de Melo 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tools: sync up .h files with the repective arch and uapi .h files

2018-05-30T10:19:59+00:00

perf wants matching .h files otherwise it complains during the build
process.  As these files have been modified over the past few 4.14.y
releases, they are out of sync, so fix that problem by properly copying
the respective versions to the tools/ mirror copies.

Signed-off-by: Greg Kroah-Hartman

perf tools: Add trace/beauty/generated/ into .gitignore

2018-05-30T10:19:59+00:00

commit 2fe2230d4183d2c311bbb7b426491ac486216a16 upstream.

No functionality changes.

Signed-off-by: Ravi Bangoria 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: http://lkml.kernel.org/r/20180130053053.13214-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

selftests/net: fixes psock_fanout eBPF test case

2018-05-30T05:52:40+00:00

[ Upstream commit ddd0010392d9cbcb95b53d11b7cafc67b373ab56 ]

eBPF test fails due to verifier failure because log_buf is too small.
Fixed by increasing log_buf size

Signed-off-by: Prashant Bhole 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

perf tests: Fix dwarf unwind for stripped binaries

2018-05-30T05:52:40+00:00

[ Upstream commit fdf7c49c200d1b9909e2204cec5bd68b48605c71 ]

When we strip the perf binary, dwarf unwind test stop
to work. The reason is that strip will remove static
function symbols, which we need to check for unwind.

This change will keep this test working in cases where
the global symbols are put into dynamic symbol table,
which is the case on x86. It still won't work on powerpc.

Making those 5 local functions global, and adding
'test_dwarf_unwind__' to their names.

Committer testing:

Before:

  # perf test dwarf
  58: DWARF unwind                               : Ok
  # strip ~/bin/perf
  # perf test dwarf
  58: DWARF unwind                               : FAILED!
  # perf test -v dwarf
  58: DWARF unwind                               :
  --- start ---
  test child forked, pid 6590
  unwind: thread map already set, dso=/home/acme/bin/perf
  
  unwind: access_mem addr 0x7ffce6c48098 val 48563f, offset 1144
  unwind: test__dwarf_unwind:ip = 0x4a54e5 (0xa54e5)
  got: test__dwarf_unwind 0xa54e5, expecting test__dwarf_unwind
  unwind: '':ip = 0x4a50bb (0xa50bb)
  failed: got unresolved address 0xa50bb
  unwind failed
  test child finished with -1
  ---- end ----
  DWARF unwind: FAILED!
  #

After:

  # perf test dwarf
  58: DWARF unwind                               : Ok
  # strip ~/bin/perf
  # perf test dwarf
  58: DWARF unwind                               : Ok
  #
  # perf test -v dwarf
  58: DWARF unwind                               :
  --- start ---
  test child forked, pid 7219
  unwind: thread map already set, dso=/home/acme/bin/perf
  
  unwind: access_mem addr 0x7fff007da2c8 val 48575f, offset 1144
  unwind: test__arch_unwind_sample:ip = 0x589044 (0x189044)
  got: test__arch_unwind_sample 0x189044, expecting test__arch_unwind_sample
  unwind: test_dwarf_unwind__thread:ip = 0x4a52f7 (0xa52f7)
  got: test_dwarf_unwind__thread 0xa52f7, expecting test_dwarf_unwind__thread
  unwind: test_dwarf_unwind__compare:ip = 0x4a5468 (0xa5468)
  got: test_dwarf_unwind__compare 0xa5468, expecting test_dwarf_unwind__compare
  unwind: bsearch:ip = 0x7f6608ae94d8 (0x394d8)
  got: bsearch 0x394d8, expecting bsearch
  unwind: test_dwarf_unwind__krava_3:ip = 0x4a54d1 (0xa54d1)
  got: test_dwarf_unwind__krava_3 0xa54d1, expecting test_dwarf_unwind__krava_3
  unwind: test_dwarf_unwind__krava_2:ip = 0x4a550b (0xa550b)
  got: test_dwarf_unwind__krava_2 0xa550b, expecting test_dwarf_unwind__krava_2
  unwind: test_dwarf_unwind__krava_1:ip = 0x4a554b (0xa554b)
  got: test_dwarf_unwind__krava_1 0xa554b, expecting test_dwarf_unwind__krava_1
  unwind: test__dwarf_unwind:ip = 0x4a5605 (0xa5605)
  got: test__dwarf_unwind 0xa5605, expecting test__dwarf_unwind
  test child finished with 0
  ---- end ----
  DWARF unwind: Ok
  #

Signed-off-by: Jiri Olsa 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Alexander Shishkin 
Cc: David Ahern 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20180206181813.10943-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

perf report: Fix memory corruption in --branch-history mode --branch-history

2018-05-30T05:52:40+00:00

[ Upstream commit e3ebaa465136ecfedf9c6f4671df02bf625f8125 ]

Jin Yao reported memory corrupton in perf report with
branch info used for stack trace:

  > Following command lines will cause perf crash.

  > perf record -j call -g -a 
  > perf report --branch-history
  >
  > *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 ***
  > ======= Backtrace: =========
  > /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725]
  > /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a]
  > /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc]
  > perf[0x51b914]
  > perf(hist_entry_iter__add+0x1e5)[0x51f305]
  > perf[0x43cf01]
  > perf[0x4fa3bf]
  > perf[0x4fa923]
  > perf[0x4fd396]
  > perf[0x4f9614]
  > perf(perf_session__process_events+0x89e)[0x4fc38e]
  > perf(cmd_report+0x15d2)[0x43f202]
  > perf[0x4a059f]
  > perf(main+0x631)[0x427b71]
  > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830]
  > perf(_start+0x29)[0x427d89]

For the cumulative output, we allocate the he_cache array based on the
--max-stack option value and populate it with data from 'callchain_cursor'.

The --max-stack option value does not ensure now the limit for number of
callchain_cursor nodes, so the cumulative iter code will allocate smaller array
than it's actually needed and cause above corruption.

I think the --max-stack limit does not apply here anyway, because we add
callchain data as normal hist entries, while the --max-stack control the limit
of single entry callchain depth.

Using the callchain_cursor.nr as he_cache array count to fix this. Also
removing struct hist_entry_iter::max_stack, because there's no longer any use
for it.

We need more fixes to ensure that the branch stack code follows properly the
logic of --max-stack, which is not the case at the moment.

Original-patch-by: Jin Yao 
Signed-off-by: Jiri Olsa 
Reported-by: Jin Yao 
Cc: Alexander Shishkin 
Cc: Andi Kleen 
Cc: Jiri Olsa 
Cc: Kan Liang 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20180216123619.GA9945@krava
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

perf tests: Use arch__compare_symbol_names to compare symbols

2018-05-30T05:52:40+00:00

[ Upstream commit ab6e9a99345131cd8e54268d1d0dc04a33f7ed11 ]

The symbol search called by machine__find_kernel_symbol_by_name is using
internally arch__compare_symbol_names function to compare 2 symbol
names, because different archs have different ways of comparing symbols.
Mostly for skipping '.' prefixes and similar.

In test 1 when we try to find matching symbols in kallsyms and vmlinux,
by address and by symbol name. When either is found we compare the pair
symbol names  by simple strcmp, which is not good enough for reasons
explained in previous paragraph.

On powerpc this can cause lockup, because even thought we found the
pair, the compared names are different and don't match simple strcmp.
Following code path is executed, that leads to lockup:

   - we find the pair in kallsyms by sym->start
next_pair:
   - we compare the names and it fails
   - we find the pair by sym->name
   - the pair addresses match so we call goto next_pair
     because we assume the names match in this case

Signed-off-by: Jiri Olsa 
Tested-by: Naveen N. Rao 
Acked-by: Naveen N. Rao 
Cc: Alexander Shishkin 
Cc: David Ahern 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Fixes: 031b84c407c3 ("perf probe ppc: Enable matching against dot symbols automatically")
Link: http://lkml.kernel.org/r/20180215122635.24029-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

perf report: Fix wrong jump arrow

2018-05-30T05:52:40+00:00

[ Upstream commit b40982e8468b46b8f7f5bba5a7e541ec04a29d7d ]

When we use perf report interactive annotate view, we can see
the position of jump arrow is not correct. For example,

1. perf record -b ...
2. perf report
3. In interactive mode, select Annotate 'function'

Percent│ IPC Cycle
       │                                if (flag)
  1.37 │0.4┌──   1      ↓ je     82
       │   │                                    x += x / y + y / x;
  0.00 │0.4│  1310        movsd  (%rsp),%xmm0
  0.00 │0.4│   565        movsd  0x8(%rsp),%xmm4
       │0.4│              movsd  0x8(%rsp),%xmm1
       │0.4│              movsd  (%rsp),%xmm3
       │0.4│              divsd  %xmm4,%xmm0
  0.00 │0.4│   579        divsd  %xmm3,%xmm1
       │0.4│              movsd  (%rsp),%xmm2
       │0.4│              addsd  %xmm1,%xmm0
       │0.4│              addsd  %xmm2,%xmm0
  0.00 │0.4│              movsd  %xmm0,(%rsp)
       │   │                    volatile double x = 1212121212, y = 121212;
       │   │
       │   │                    s_randseed = time(0);
       │   │                    srand(s_randseed);
       │   │
       │   │                    for (i = 0; i < 2000000000; i++) {
  1.37 │0.4└─→      82:   sub    $0x1,%ebx
 28.21 │0.48    17      ↑ jne    38

The jump arrow in above example is not correct. It should add the
width of IPC and Cycle.

With this patch, the result is:

Percent│ IPC Cycle
       │                                if (flag)
  1.37 │0.48     1     ┌──je     82
       │               │                        x += x / y + y / x;
  0.00 │0.48  1310     │  movsd  (%rsp),%xmm0
  0.00 │0.48   565     │  movsd  0x8(%rsp),%xmm4
       │0.48           │  movsd  0x8(%rsp),%xmm1
       │0.48           │  movsd  (%rsp),%xmm3
       │0.48           │  divsd  %xmm4,%xmm0
  0.00 │0.48   579     │  divsd  %xmm3,%xmm1
       │0.48           │  movsd  (%rsp),%xmm2
       │0.48           │  addsd  %xmm1,%xmm0
       │0.48           │  addsd  %xmm2,%xmm0
  0.00 │0.48           │  movsd  %xmm0,(%rsp)
       │               │        volatile double x = 1212121212, y = 121212;
       │               │
       │               │        s_randseed = time(0);
       │               │        srand(s_randseed);
       │               │
       │               │        for (i = 0; i < 2000000000; i++) {
  1.37 │0.48        82:└─→sub    $0x1,%ebx
 28.21 │0.48    17      ↑ jne    38

Committer notes:

Please note that only from LBRv5 (according to Jiri) onwards, i.e. >=
Skylake is that we'll have the cycles counts in each branch record
entry, so to see the Cycles and IPC columns, and be able to test this
patch, one need a capable hardware.

While applying this I first tested it on a Broadwell class machine and
couldn't get those columns, will add code to the annotate browser to
warn the user about that, i.e. you have branch records, but no cycles,
use a more recent hardware to get the cycles and IPC columns.

Signed-off-by: Jin Yao 
Cc: Alexander Shishkin 
Cc: Andi Kleen 
Cc: Jin Yao 
Cc: Jiri Olsa 
Cc: Kan Liang 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1517223473-14750-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

perf test: Fix test case inet_pton to accept inlines.

2018-05-30T05:52:40+00:00

[ Upstream commit 0f19a038afdc592176c9a302f0d08be6a68ad74a ]

Using Fedora 27 and latest Linux kernel the test case
trace+probe_libc_inet_pton.sh fails again on s390.  This time is the
inlining of functions which does not match.  After an update of the
glibc (from 2.26-16 to 2.26-24) the output is different

The expected output is:

             __inet_pton (/usr/lib64/libc-2.26.so)
             gaih_inet (inlined)
             ....

The actual output is:

  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.061/0.061/0.061/0.000 ms
       0.000 probe_libc:inet_pton:(3ffb2140448))
             __inet_pton (inlined)
             gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
             ...

Fix this by being less strict on 'inlined' verses library name and
accept both

Signed-off-by: Thomas Richter 
Cc: Heiko Carstens 
Cc: Hendrik Brueckner 
Cc: Martin Schwidefsky 
Link: http://lkml.kernel.org/r/20180214070303.55757-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tools: hv: fix compiler warnings about major/target_fname

2018-05-30T05:52:36+00:00

[ Upstream commit 1330fc35327f3ecdfa1aa645e7321ced7349b2cd ]

This patch fixes the below warnings with new glibc and gcc:

hv_vss_daemon.c:100:13: warning: In the GNU C Library, "major" is defined
 by . For historical compatibility, it is currently
defined by  as well, but we plan to  remove this soon.
To use "major", include   directly.

hv_fcopy_daemon.c:42:2: note: 'snprintf' output between 2 and 1040
bytes into a destination of size 260

Signed-off-by: Dexuan Cui 
Cc: Stephen Hemminger 
Cc: K. Y. Srinivasan 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman