linux-stable.git/tools, branch v4.12.7

perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target

2017-07-27T22:10:20+00:00

commit 80f62589fa52f530cffc50e78c0b5a2ae572d61e upstream.

When the jump instruction is displayed at the row 0 in annotate view,
the arrow is broken. An example:

 16.86 │   ┌──je     82
  0.01 │      movsd  (%rsp),%xmm0
       │      movsd  0x8(%rsp),%xmm4
       │      movsd  0x8(%rsp),%xmm1
       │      movsd  (%rsp),%xmm3
       │      divsd  %xmm4,%xmm0
       │      divsd  %xmm3,%xmm1
       │      movsd  (%rsp),%xmm2
       │      addsd  %xmm1,%xmm0
       │      addsd  %xmm2,%xmm0
       │      movsd  %xmm0,(%rsp)
       │82:   sub    $0x1,%ebx
 83.03 │    ↑ jne    38
       │      add    $0x10,%rsp
       │      xor    %eax,%eax
       │      pop    %rbx
       │    ← retq

The patch increments the row number before checking with 0.

Signed-off-by: Yao Jin 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Alexander Shishkin 
Cc: Andi Kleen 
Cc: Jiri Olsa 
Cc: Kan Liang 
Cc: Peter Zijlstra 
Fixes: 944e1abed9e1 ("perf ui browser: Add method to draw up/down arrow line")
Link: http://lkml.kernel.org/r/1496901704-30275-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

tools/testing/nvdimm: fix nfit_test buffer overflow

2017-07-27T22:10:11+00:00

commit a117699c6c4a4b1b4e90ed51e393590986567cb4 upstream.

The root cause of panic is the num_pm of nfit_test1 is wrong.
Though 1 is specified for num_pm at nfit_test_init(), it must be 2,
because nfit_test1->spa_set[] array has 2 elements.

Since the array is smaller than expected, the driver breaks other area.
(it is often the link list of devres).

As a result, panic occurs like the following example.

    CPU: 4 PID: 2233 Comm: lt-libndctl Tainted: G           O    4.12.0-rc1+ #12
    RIP: 0010:__list_del_entry_valid+0x6c/0xa0
    Call Trace:
     release_nodes+0x76/0x260
     devres_release_all+0x3c/0x50
     device_release_driver_internal+0x159/0x200
     device_release_driver+0x12/0x20
     bus_remove_device+0xfd/0x170
     device_del+0x1e8/0x330
     platform_device_del+0x28/0x90
     platform_device_unregister+0x12/0x30
     nfit_test_exit+0x2a/0x93b [nfit_test]

Signed-off-by: Yasunori Goto 
Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Clear FUP flag on error

2017-07-27T22:10:05+00:00

commit 6a558f12dbe85437acbdec5e149ea07b5554eced upstream.

Sometimes a FUP packet is associated with a TSX transaction and a flag is
set to indicate that. Ensure that flag is cleared on any error condition
because at that point the decoder can no longer assume it is correct.

Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/1495786658-18063-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Use FUP always when scanning for an IP

2017-07-27T22:10:05+00:00

commit 622b7a47b843c78626f40c1d1aeef8483383fba2 upstream.

The decoder will try to use branch packets to find an IP to start decoding
or to recover from errors. Currently the FUP packet is used only in the
case of an overflow, however there is no reason for that to be a special
case. So just use FUP always when scanning for an IP.

Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/1495786658-18063-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Ensure never to set 'last_ip' when packet 'count' is zero

2017-07-27T22:10:05+00:00

commit f952eaceb089b691eba7c4e13686e742a8f26bf5 upstream.

Intel PT uses IP compression based on the last IP. For decoding purposes,
'last IP' is not updated when a branch target has been suppressed, which is
indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so
ensure never to set 'last_ip' when packet 'count' is zero.

Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/1495786658-18063-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Fix last_ip usage

2017-07-27T22:10:04+00:00

commit ee14ac0ef6827cd6f9a572cc83dd0191ea17812c upstream.

Intel PT uses IP compression based on the last IP. For decoding
purposes, 'last IP' is considered to be reset to zero whenever there is
a synchronization packet (PSB). The decoder wasn't doing that, and was
treating the zero value to mean that there was no last IP, whereas
compression can be done against the zero value. Fix by setting last_ip
to zero when a PSB is received and keep track of have_last_ip.

Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/1495786658-18063-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Ensure IP is zero when state is INTEL_PT_STATE_NO_IP

2017-07-27T22:10:04+00:00

commit ad7167a8cd174ba7d8c0d0ed8d8410521206d104 upstream.

A value of zero is used to indicate that there is no IP. Ensure the
value is zero when the state is INTEL_PT_STATE_NO_IP.

Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/1495786658-18063-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Fix missing stack clear

2017-07-27T22:10:04+00:00

commit 12b7080609097753fd8198cc1daf589be3ec1cca upstream.

The return compression stack must be cleared whenever there is a PSB. Fix
one case where that was not happening.

Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/1495786658-18063-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Improve sample timestamp

2017-07-27T22:10:04+00:00

commit 3f04d98e972b59706bd43d6cc75efac91f8fba50 upstream.

The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached. Improve that situation by using the pkt_state to
determine when to use the current or previous timestamp.

Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/1495786658-18063-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Move decoder error setting into one condition

2017-07-27T22:10:04+00:00

commit 22c06892332d8916115525145b78e606e9cc6492 upstream.

Move decoder error setting into one condition.

Cc'ed to stable because later fixes depend on it.

Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Link: http://lkml.kernel.org/r/1495786658-18063-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman