linux-stable.git/tools/testing, branch v6.7.2

selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes

2024-01-25T23:45:31+00:00

[ Upstream commit b34f4de6d30cbaa8fed905a5080b6eace8c84dc7 ]

'qos_pfc' test checks PFC behavior. The idea is to limit the traffic
using a shaper somewhere in the flow of the packets. In this area, the
buffer is smaller than the buffer at the beginning of the flow, so it fills
up until there is no more space left. The test configures there PFC
which is supposed to notice that the headroom is filling up and send PFC
Xoff to indicate the transmitter to stop sending traffic for the priorities
sharing this PG.

The Xon/Xoff threshold is auto-configured and always equal to
2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet,
traffic will keep arriving until the transmitter receives and processes
the PFC packet. This amount of traffic is known as the PFC delay allowance.

Currently the buffer for the delay traffic is configured as 100KB. The
MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB.
This allows 80KB extra to be stored in this buffer.

8-lane ports use two buffers among which the configured buffer is split,
the Xoff threshold then applies to each buffer in parallel.

The test does not take into account the behavior of 8-lane ports, when the
ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes,
packets are dropped and the test fails.

Check if the relevant ports use 8 lanes, in such case double the size of
the buffer, as the headroom is split half-half.

Cc: Shuah Khan 
Fixes: bfa804784e32 ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Amit Cohen 
Reviewed-by: Ido Schimmel 
Signed-off-by: Petr Machata 
Acked-by: Paolo Abeni 
Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

mlxsw: spectrum_acl_tcam: Fix stack corruption

2024-01-25T23:45:31+00:00

[ Upstream commit 483ae90d8f976f8339cf81066312e1329f2d3706 ]

When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.

One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.

In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.

Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.

Add a test case to make sure the machine does not crash when this
condition is hit.

[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
 dump_stack_lvl+0x36/0x50
 panic+0x305/0x330
 __stack_chk_fail+0x15/0x20
 mlxsw_sp_acl_tcam_group_update+0x116/0x120
 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
 mlxsw_sp_acl_rule_add+0x47/0x240
 mlxsw_sp_flower_replace+0x1a9/0x1d0
 tc_setup_cb_add+0xdc/0x1c0
 fl_hw_replace_filter+0x146/0x1f0
 fl_change+0xc17/0x1360
 tc_new_tfilter+0x472/0xb90
 rtnetlink_rcv_msg+0x313/0x3b0
 netlink_rcv_skb+0x58/0x100
 netlink_unicast+0x244/0x390
 netlink_sendmsg+0x1e4/0x440
 ____sys_sendmsg+0x164/0x260
 ___sys_sendmsg+0x9a/0xe0
 __sys_sendmsg+0x7a/0xc0
 do_syscall_64+0x40/0xe0
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Reported-by: Orel Hagag 
Signed-off-by: Ido Schimmel 
Reviewed-by: Amit Cohen 
Signed-off-by: Petr Machata 
Acked-by: Paolo Abeni 
Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure

2024-01-25T23:45:30+00:00

[ Upstream commit 6d6eeabcfaba2fcadf5443b575789ea606f9de83 ]

Lately, a bug was found when many TC filters are added - at some point,
several bugs are printed to dmesg [1] and the switch is crashed with
segmentation fault.

The issue starts when gen_pool_free() fails because of unexpected
behavior - a try to free memory which is already freed, this leads to BUG()
call which crashes the switch and makes many other bugs.

Trying to track down the unexpected behavior led to a bug in eRP code. The
function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated
index, sets the value and returns an error code. When gen_pool_alloc()
fails it returns address 0, we track it and return -ENOBUFS outside, BUT
the call for gen_pool_alloc() already override the index in erp_table
structure. This is a problem when such allocation is done as part of
table expansion. This is not a new table, which will not be used in case
of allocation failure. We try to expand eRP table and override the
current index (non-zero) with zero. Then, it leads to an unexpected
behavior when address 0 is freed twice. Note that address 0 is valid in
erp_table->base_index and indeed other tables use it.

gen_pool_alloc() fails in case that there is no space left in the
pre-allocated pool, in our case, the pool is limited to
ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max
erp entries are required, we exceed the limit and return an error, this
error leads to "Failed to migrate vregion" print.

Fix this by changing erp_table->base_index only in case of a successful
allocation.

Add a test case for such a scenario. Without this fix it causes
segmentation fault:

$ TESTS="max_erp_entries_test" ./tc_flower.sh
./tc_flower.sh: line 988:  1560 Segmentation fault      tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null

[1]:
kernel BUG at lib/genalloc.c:508!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:gen_pool_free_owner+0xc9/0xe0
...
Call Trace:
 
 __mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum]
 mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum]
 objagg_obj_root_destroy+0x18/0x80 [objagg]
 objagg_obj_destroy+0x12c/0x130 [objagg]
 mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum]
 mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum]
 mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum]
 mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum]
 mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum]
 mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum]
 tc_setup_cb_destroy+0xc1/0x180
 fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
 __fl_delete+0x1ac/0x1c0 [cls_flower]
 fl_destroy+0xc2/0x150 [cls_flower]
 tcf_proto_destroy+0x1a/0xa0
...
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion

Fixes: f465261aa105 ("mlxsw: spectrum_acl: Implement common eRP core")
Signed-off-by: Amit Cohen 
Signed-off-by: Ido Schimmel 
Signed-off-by: Petr Machata 
Acked-by: Paolo Abeni 
Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests: bonding: Change script interpreter

2024-01-25T23:45:28+00:00

[ Upstream commit c2518da8e6b0e248cfff1d4b6682e14020bd4d3f ]

The tests changed by this patch, as well as the scripts they source, use
features which are not part of POSIX sh (ex. 'source' and 'local'). As a
result, these tests fail when /bin/sh is dash such as on Debian. Change the
interpreter to bash so that these tests can run successfully.

Fixes: d43eff0b85ae ("selftests: bonding: up/down delay w/ slave link flapping")
Tested-by: Hangbin Liu 
Reviewed-by: Hangbin Liu 
Reviewed-by: Petr Machata 
Signed-off-by: Benjamin Poirier 
Reviewed-by: Przemek Kitszel 
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

selftests/sgx: Skip non X86_64 platform

2024-01-25T23:45:21+00:00

[ Upstream commit 981cf568a8644161c2f15c02278ebc2834b51ba6 ]

When building whole selftests on arm64, rsync gives an erorr about sgx:

rsync: [sender] link_stat "/root/linux-next/tools/testing/selftests/sgx/test_encl.elf" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1327) [sender=3.2.5]

The root casue is sgx only used on X86_64, and shall be skipped on other
platforms.

Fix this by moving TEST_CUSTOM_PROGS and TEST_FILES inside the if check,
then the build result will be "Skipping non-existent dir: sgx".

Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Signed-off-by: Zhao Mengmeng 
Signed-off-by: Dave Hansen 
Reviewed-by: Jarkko Sakkinen 
Link: https://lore.kernel.org/all/20231206025605.3965302-1-zhaomzhao%40126.com
Signed-off-by: Sasha Levin

selftests/sgx: Include memory clobber for inline asm in test enclave

2024-01-25T23:45:21+00:00

[ Upstream commit 853a57a43ebdb8c024160c1a0990bae85f4bcc2f ]

Add the "memory" clobber to the EMODPE and EACCEPT asm blocks to tell the
compiler the assembly code accesses to the secinfo struct. This ensures
the compiler treats the asm block as a memory barrier and the write to
secinfo will be visible to ENCLU.

Fixes: 20404a808593 ("selftests/sgx: Add test for EPCM permission changes")
Signed-off-by: Jo Van Bulck 
Signed-off-by: Dave Hansen 
Reviewed-by: Kai Huang 
Reviewed-by: Jarkko Sakkinen 
Link: https://lore.kernel.org/all/20231005153854.25566-4-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin

selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry

2024-01-25T23:45:21+00:00

[ Upstream commit b84fc2e0139ba4b23b8039bd7cfd242894fe8f8b ]

Ensure sym_tab and sym_names are zero-initialized and add an early-out
condition in the unlikely (erroneous) case that the enclave ELF file would
not contain a symbol table.

This addresses -Werror=maybe-uninitialized compiler warnings for gcc -O2.

Fixes: 33c5aac3bf32 ("selftests/sgx: Test complete changing of page type flow")
Signed-off-by: Jo Van Bulck 
Signed-off-by: Dave Hansen 
Reviewed-by: Jarkko Sakkinen 
Link: https://lore.kernel.org/all/20231005153854.25566-3-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin

selftests/sgx: Fix uninitialized pointer dereference in error path

2024-01-25T23:45:21+00:00

[ Upstream commit 79eba8c924f7decfa71ddf187d38cb9f5f2cd7b3 ]

Ensure ctx is zero-initialized, such that the encl_measure function will
not call EVP_MD_CTX_destroy with an uninitialized ctx pointer in case of an
early error during key generation.

Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX")
Signed-off-by: Jo Van Bulck 
Signed-off-by: Dave Hansen 
Reviewed-by: Jarkko Sakkinen 
Acked-by: Kai Huang 
Link: https://lore.kernel.org/all/20231005153854.25566-2-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin

selftests/bpf: Add assert for user stacks in test_task_stack

2024-01-25T23:45:09+00:00

commit 727a92d62fd6a382b4c5972008e45667e707b0e4 upstream.

This is a follow up to:
commit b8e3a87a627b ("bpf: Add crosstask check to __bpf_get_stack").

This test ensures that the task iterator only gets a single
user stack (for the current task).

Signed-off-by: Jordan Rome 
Signed-off-by: Andrii Nakryiko 
Acked-by: Stanislav Fomichev 
Link: https://lore.kernel.org/bpf/20231112023010.144675-1-linux@jordanrome.com
Signed-off-by: Greg Kroah-Hartman

kselftest/alsa - conf: Stringify the printed errno in sysfs_get()

2024-01-25T23:45:08+00:00

[ Upstream commit fd38dd6abda589a8771e7872e4dea28c99c6a6ef ]

GCC 13.2.0 reported the warning of the print format specifier:

conf.c: In function ‘sysfs_get’:
conf.c:181:72: warning: format ‘%s’ expects argument of type ‘char *’, \
			but argument 3 has type ‘int’ [-Wformat=]
  181 |                 ksft_exit_fail_msg("sysfs: unable to read value '%s': %s\n",
      |                                                                       ~^
      |                                                                        |
      |                                                                        char *
      |                                                                       %d

The fix passes strerror(errno) as it was intended, like in the sibling error
exit message.

Fixes: aba51cd0949ae ("selftests: alsa - add PCM test")
Cc: Mark Brown 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Cc: Shuah Khan 
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac 
Acked-by: Mark Brown 
Link: https://lore.kernel.org/r/20240107173704.937824-5-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin