linux-stable.git/tools/testing, branch v6.6.4

kselftest/arm64: Fix output formatting for za-fork

2023-12-03T06:33:06+00:00

commit 460e462d22542adfafd8a5bc979437df73f1cbf3 upstream.

The za-fork test does not output a newline when reporting the result of
the one test it runs, causing the counts printed by kselftest to be
included in the test name.  Add the newline.

Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h")
Cc:  # 6.4.x
Signed-off-by: Mark Brown 
Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org
Signed-off-by: Catalin Marinas 
Signed-off-by: Greg Kroah-Hartman

vsock/test: fix SEQPACKET message bounds test

2023-12-03T06:33:05+00:00

[ Upstream commit f0863888f6cfef33e3117dccfe94fa78edf76be4 ]

Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.

Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Signed-off-by: Arseniy Krasnov 
Reported-by: Bogdan Marcynkov 
Reviewed-by: Stefano Garzarella 
Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests: mptcp: fix fastclose with csum failure

2023-11-28T17:20:14+00:00

commit 7cefbe5e1dacc7236caa77e9d072423f21422fe2 upstream.

Running the mp_join selftest manually with the following command line:

  ./mptcp_join.sh -z -C

leads to some failures:

  002 fastclose server test
  # ...
  rtx                                 [fail] got 1 MP_RST[s] TX expected 0
  # ...
  rstrx                               [fail] got 1 MP_RST[s] RX expected 0

The problem is really in the wrong expectations for the RST checks
implied by the csum validation. Note that the same check is repeated
explicitly in the same test-case, with the correct expectation and
pass successfully.

Address the issue explicitly setting the correct expectation for
the failing checks.

Reported-by: Xiumei Mu 
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni 
Reviewed-by: Matthieu Baerts 
Signed-off-by: Matthieu Baerts 
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests/resctrl: Extend signal handler coverage to unmount on receiving signal

2023-11-28T17:20:08+00:00

[ Upstream commit 3aff5146445582454c35900f3c0c972987cdd595 ]

Unmounting resctrl FS has been moved into the per test functions in
resctrl_tests.c by commit caddc0fbe495 ("selftests/resctrl: Move
resctrl FS mount/umount to higher level"). In case a signal (SIGINT,
SIGTERM, or SIGHUP) is received, the running selftest is aborted by
ctrlc_handler() which then unmounts resctrl fs before exiting. The
current section between signal_handler_register() and
signal_handler_unregister(), however, does not cover the entire
duration when resctrl FS is mounted.

Move signal_handler_register() and signal_handler_unregister() calls
from per test files into resctrl_tests.c to properly unmount resctrl
fs. In order to not add signal_handler_register()/unregister() n times,
create helpers test_prepare() and test_cleanup().

Do not call ksft_exit_fail_msg() in test_prepare() but only in the per
test function to keep the control flow cleaner without adding calls to
exit() deep into the call chain.

Adjust child process kill() call in ctrlc_handler() to only be invoked
if the child was already forked.

Fixes: caddc0fbe495 ("selftests/resctrl: Move resctrl FS mount/umount to higher level")
Signed-off-by: Ilpo Järvinen 
Tested-by: Shaopeng Tan 
Reviewed-by: Shaopeng Tan 
Reviewed-by: Reinette Chatre 
Cc: 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/resctrl: Make benchmark command const and build it with pointers

2023-11-28T17:20:08+00:00

[ Upstream commit e33cb5702a9f287d829b0e9e6abe57f6a4aba6d2 ]

Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.

Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.

CMT test has to create a copy of the benchmark command before altering
the benchmark command.

Signed-off-by: Ilpo Järvinen 
Tested-by: Shaopeng Tan 
Reviewed-by: Shaopeng Tan 
Reviewed-by: Reinette Chatre 
Reviewed-by: "Wieczor-Retman, Maciej" 
Signed-off-by: Shuah Khan 
Stable-dep-of: 3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin

selftests/resctrl: Simplify span lifetime

2023-11-28T17:20:08+00:00

[ Upstream commit b1a901e078c4ee4a6fe13021c4577ef5f3155251 ]

struct resctrl_val_param contains span member. resctrl_val(), however,
never uses it because the value of span is embedded into the default
benchmark command and parsed from it by run_benchmark().

Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code
that needs it. CMT and CAT tests communicate span that is different
from the DEFAULT_SPAN between their internal functions which is
converted into passing it directly as a parameter.

Signed-off-by: Ilpo Järvinen 
Tested-by: Shaopeng Tan 
Reviewed-by: Reinette Chatre 
Reviewed-by: Shaopeng Tan 
Reviewed-by: "Wieczor-Retman, Maciej" 
Signed-off-by: Shuah Khan 
Stable-dep-of: 3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin

selftests/resctrl: Remove bw_report and bm_type from main()

2023-11-28T17:20:08+00:00

[ Upstream commit 47e36f16c7846bf3627ff68525e02555c53dc99e ]

bw_report is always set to "reads" and bm_type is set to "fill_buf" but
is never used.

Set bw_report directly to "reads" in MBA/MBM test and remove bm_type.

Signed-off-by: Ilpo Järvinen 
Tested-by: Shaopeng Tan 
Reviewed-by: Reinette Chatre 
Reviewed-by: Shaopeng Tan 
Reviewed-by: "Wieczor-Retman, Maciej" 
Signed-off-by: Shuah Khan 
Stable-dep-of: 3aff51464455 ("selftests/resctrl: Extend signal handler coverage to unmount on receiving signal")
Signed-off-by: Sasha Levin

cxl/region: Fix x1 root-decoder granularity calculations

2023-11-28T17:20:07+00:00

commit 98a04c7aced2b43b3ac4befe216c4eecc7257d4b upstream.

Root decoder granularity must match value from CFWMS, which may not
be the region's granularity for non-interleaved root decoders.

So when calculating granularities for host bridge decoders, use the
region's granularity instead of the root decoder's granularity to ensure
the correct granularities are set for the host bridge decoders and any
downstream switch decoders.

Test configuration is 1 host bridge * 2 switches * 2 endpoints per switch.

Region created with 2048 granularity using following command line:

cxl create-region -m -d decoder0.0 -w 4 mem0 mem2 mem1 mem3 \
		  -g 2048 -s 2048M

Use "cxl list -PDE | grep granularity" to get a view of the granularity
set at each level of the topology.

Before this patch:
        "interleave_granularity":2048,
        "interleave_granularity":2048,
    "interleave_granularity":512,
        "interleave_granularity":2048,
        "interleave_granularity":2048,
    "interleave_granularity":512,
"interleave_granularity":256,

After:
        "interleave_granularity":2048,
        "interleave_granularity":2048,
    "interleave_granularity":4096,
        "interleave_granularity":2048,
        "interleave_granularity":2048,
    "interleave_granularity":4096,
"interleave_granularity":2048,

Fixes: 27b3f8d13830 ("cxl/region: Program target lists")
Cc: 
Signed-off-by: Jim Harris 
Link: https://lore.kernel.org/r/169824893473.1403938.16110924262989774582.stgit@bgt-140510-bm03.eng.stellus.in
[djbw: fixup the prebuilt cxl_test region]
Signed-off-by: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

selftests/clone3: Fix broken test under !CONFIG_TIME_NS

2023-11-28T17:20:05+00:00

commit fc7f04dc23db50206bee7891516ed4726c3f64cf upstream.

When execute the following command to test clone3 under !CONFIG_TIME_NS:

  # make headers && cd tools/testing/selftests/clone3 && make && ./clone3

we can see the following error info:

  # [7538] Trying clone3() with flags 0x80 (size 0)
  # Invalid argument - Failed to create new process
  # [7538] clone3() with flags says: -22 expected 0
  not ok 18 [7538] Result (-22) is different than expected (0)
  ...
  # Totals: pass:18 fail:1 xfail:0 xpass:0 skip:0 error:0

This is because if CONFIG_TIME_NS is not set, but the flag
CLONE_NEWTIME (0x80) is used to clone a time namespace, it
will return -EINVAL in copy_time_ns().

If kernel does not support CONFIG_TIME_NS, /proc/self/ns/time
will be not exist, and then we should skip clone3() test with
CLONE_NEWTIME.

With this patch under !CONFIG_TIME_NS:

  # make headers && cd tools/testing/selftests/clone3 && make && ./clone3
  ...
  # Time namespaces are not supported
  ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
  ...
  # Totals: pass:18 fail:0 xfail:0 xpass:0 skip:1 error:0

Link: https://lkml.kernel.org/r/1689066814-13295-1-git-send-email-yangtiezhu@loongson.cn
Fixes: 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME")
Signed-off-by: Tiezhu Yang 
Suggested-by: Thomas Gleixner 
Cc: Christian Brauner 
Cc: Shuah Khan 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests

2023-11-28T17:20:04+00:00

commit ef43c30858754d99373a63dff33280a9969b49bc upstream.

The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in

commit 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting
       format") was "randomly chosen value" (as admitted by the changelog).

When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.

Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.

Fixed commit description style error during merge:
Shuah Khan 

Fixes: 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen 
Tested-by: Shaopeng Tan 
Reviewed-by: Reinette Chatre 
Reviewed-by: Shaopeng Tan 
Cc: 
Signed-off-by: Shuah Khan 
Signed-off-by: Greg Kroah-Hartman