<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/tools/testing, branch v6.12.35</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>mm/hugetlb: unshare page tables during VMA split, not before</title>
<updated>2025-06-27T10:11:40+00:00</updated>
<author>
<name>Jann Horn</name>
<email>jannh@google.com</email>
</author>
<published>2025-05-27T21:23:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9cf5b2a3b72c23fb7b84736d5d19ee6ea718762b'/>
<id>9cf5b2a3b72c23fb7b84736d5d19ee6ea718762b</id>
<content type='text'>
commit 081056dc00a27bccb55ccc3c6f230a3d5fd3f7e0 upstream.

Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops-&gt;may_split().  This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.

Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens.  At that
point, both the VMA and the rmap(s) are write-locked.

An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:

1. from hugetlb_split(), holding:
    - mmap lock (exclusively)
    - VMA lock
    - file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
   call us with only the mmap lock held (in shared mode), but currently
   only runs while holding mmap lock (exclusively) and VMA lock

Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.

[jannh@google.com: v2]
  Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn &lt;jannh@google.com&gt;
Cc: Liam Howlett &lt;liam.howlett@oracle.com&gt;
Reviewed-by: Lorenzo Stoakes &lt;lorenzo.stoakes@oracle.com&gt;
Reviewed-by: Oscar Salvador &lt;osalvador@suse.de&gt;
Cc: Lorenzo Stoakes &lt;lorenzo.stoakes@oracle.com&gt;
Cc: Vlastimil Babka &lt;vbabka@suse.cz&gt;
Cc: &lt;stable@vger.kernel.org&gt;	[b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
[stable backport: added missing include]
Signed-off-by: Jann Horn &lt;jannh@google.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 081056dc00a27bccb55ccc3c6f230a3d5fd3f7e0 upstream.

Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops-&gt;may_split().  This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.

Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens.  At that
point, both the VMA and the rmap(s) are write-locked.

An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:

1. from hugetlb_split(), holding:
    - mmap lock (exclusively)
    - VMA lock
    - file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
   call us with only the mmap lock held (in shared mode), but currently
   only runs while holding mmap lock (exclusively) and VMA lock

Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.

[jannh@google.com: v2]
  Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn &lt;jannh@google.com&gt;
Cc: Liam Howlett &lt;liam.howlett@oracle.com&gt;
Reviewed-by: Lorenzo Stoakes &lt;lorenzo.stoakes@oracle.com&gt;
Reviewed-by: Oscar Salvador &lt;osalvador@suse.de&gt;
Cc: Lorenzo Stoakes &lt;lorenzo.stoakes@oracle.com&gt;
Cc: Vlastimil Babka &lt;vbabka@suse.cz&gt;
Cc: &lt;stable@vger.kernel.org&gt;	[b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
[stable backport: added missing include]
Signed-off-by: Jann Horn &lt;jannh@google.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/x86: Add a test to detect infinite SIGTRAP handler loop</title>
<updated>2025-06-27T10:11:38+00:00</updated>
<author>
<name>Xin Li (Intel)</name>
<email>xin@zytor.com</email>
</author>
<published>2025-06-09T08:40:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2cb89aef981ef7b732ccb99f96c82f314e230b2f'/>
<id>2cb89aef981ef7b732ccb99f96c82f314e230b2f</id>
<content type='text'>
commit f287822688eeb44ae1cf6ac45701d965efc33218 upstream.

When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler.  To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.

This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.

The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.

Signed-off-by: Xin Li (Intel) &lt;xin@zytor.com&gt;
Signed-off-by: Dave Hansen &lt;dave.hansen@linux.intel.com&gt;
Tested-by: Sohil Mehta &lt;sohil.mehta@intel.com&gt;
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f287822688eeb44ae1cf6ac45701d965efc33218 upstream.

When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler.  To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.

This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.

The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.

Signed-off-by: Xin Li (Intel) &lt;xin@zytor.com&gt;
Signed-off-by: Dave Hansen &lt;dave.hansen@linux.intel.com&gt;
Tested-by: Sohil Mehta &lt;sohil.mehta@intel.com&gt;
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: net: build net/lib dependency in all target</title>
<updated>2025-06-19T13:32:18+00:00</updated>
<author>
<name>Bui Quang Minh</name>
<email>minhquangbui99@gmail.com</email>
</author>
<published>2025-06-01T14:29:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1184f7df1d08c682631d9fe68df407615601db14'/>
<id>1184f7df1d08c682631d9fe68df407615601db14</id>
<content type='text'>
[ Upstream commit d3f2a9587ebe68f5067f9ff624f9a83dfb911f60 ]

We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.

Signed-off-by: Bui Quang Minh &lt;minhquangbui99@gmail.com&gt;
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni &lt;pabeni@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d3f2a9587ebe68f5067f9ff624f9a83dfb911f60 ]

We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.

Signed-off-by: Bui Quang Minh &lt;minhquangbui99@gmail.com&gt;
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni &lt;pabeni@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/bpf: Fix caps for __xlated/jited_unpriv</title>
<updated>2025-06-19T13:31:48+00:00</updated>
<author>
<name>Luis Gerhorst</name>
<email>luis.gerhorst@fau.de</email>
</author>
<published>2025-05-01T07:35:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ec913bc18b45f39b029aec51bb6e2da525e3bd2f'/>
<id>ec913bc18b45f39b029aec51bb6e2da525e3bd2f</id>
<content type='text'>
[ Upstream commit cf15cdc0f0f39a5c6315200808ec3e3995b0c2d2 ]

Currently, __xlated_unpriv and __jited_unpriv do not work because the
BPF syscall will overwrite info.jited_prog_len and info.xlated_prog_len
with 0 if the process is not bpf_capable(). This bug was not noticed
before, because there is no test that actually uses
__xlated_unpriv/__jited_unpriv.

To resolve this, simply restore the capabilities earlier (but still
after loading the program). Adding this here unconditionally is fine
because the function first checks that the capabilities were initialized
before attempting to restore them.

This will be important later when we add tests that check whether a
speculation barrier was inserted in the correct location.

Signed-off-by: Luis Gerhorst &lt;luis.gerhorst@fau.de&gt;
Fixes: 9c9f73391310 ("selftests/bpf: allow checking xlated programs in verifier_* tests")
Fixes: 7d743e4c759c ("selftests/bpf: __jited test tag to check disassembly after jit")
Acked-by: Kumar Kartikeya Dwivedi &lt;memxor@gmail.com&gt;
Tested-by: Eduard Zingerman &lt;eddyz87@gmail.com&gt;
Link: https://lore.kernel.org/r/20250501073603.1402960-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit cf15cdc0f0f39a5c6315200808ec3e3995b0c2d2 ]

Currently, __xlated_unpriv and __jited_unpriv do not work because the
BPF syscall will overwrite info.jited_prog_len and info.xlated_prog_len
with 0 if the process is not bpf_capable(). This bug was not noticed
before, because there is no test that actually uses
__xlated_unpriv/__jited_unpriv.

To resolve this, simply restore the capabilities earlier (but still
after loading the program). Adding this here unconditionally is fine
because the function first checks that the capabilities were initialized
before attempting to restore them.

This will be important later when we add tests that check whether a
speculation barrier was inserted in the correct location.

Signed-off-by: Luis Gerhorst &lt;luis.gerhorst@fau.de&gt;
Fixes: 9c9f73391310 ("selftests/bpf: allow checking xlated programs in verifier_* tests")
Fixes: 7d743e4c759c ("selftests/bpf: __jited test tag to check disassembly after jit")
Acked-by: Kumar Kartikeya Dwivedi &lt;memxor@gmail.com&gt;
Tested-by: Eduard Zingerman &lt;eddyz87@gmail.com&gt;
Link: https://lore.kernel.org/r/20250501073603.1402960-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/bpf: Fix bpf_nf selftest failure</title>
<updated>2025-06-19T13:31:40+00:00</updated>
<author>
<name>Saket Kumar Bhaskar</name>
<email>skb99@linux.ibm.com</email>
</author>
<published>2025-04-09T09:56:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f1b0b9b71265f1f6c50d651f34e4828ba1de5f30'/>
<id>f1b0b9b71265f1f6c50d651f34e4828ba1de5f30</id>
<content type='text'>
[ Upstream commit 967e8def1100cb4b08c28a54d27ce69563fdf281 ]

For systems with missing iptables-legacy tool this selftest fails.

Add check to find if iptables-legacy tool is available and skip the
test if the tool is missing.

Fixes: de9c8d848d90 ("selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test")
Signed-off-by: Saket Kumar Bhaskar &lt;skb99@linux.ibm.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20250409095633.33653-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 967e8def1100cb4b08c28a54d27ce69563fdf281 ]

For systems with missing iptables-legacy tool this selftest fails.

Add check to find if iptables-legacy tool is available and skip the
test if the tool is missing.

Fixes: de9c8d848d90 ("selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test")
Signed-off-by: Saket Kumar Bhaskar &lt;skb99@linux.ibm.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20250409095633.33653-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/seccomp: fix negative_ENOSYS tracer tests on arm32</title>
<updated>2025-06-19T13:31:39+00:00</updated>
<author>
<name>Terry Tritton</name>
<email>terry.tritton@linaro.org</email>
</author>
<published>2025-05-09T11:56:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=295f1b128c9fb466d6196e8e8f12987b44cee313'/>
<id>295f1b128c9fb466d6196e8e8f12987b44cee313</id>
<content type='text'>
[ Upstream commit 73989c998814d82c71d523c104c398925470d59e ]

TRACE_syscall.ptrace.negative_ENOSYS and TRACE_syscall.seccomp.negative_ENOSYS
on arm32 are being reported as failures instead of skipping.

The teardown_trace_fixture function sets the test to KSFT_FAIL in case of a
non 0 return value from the tracer process.
Due to _metadata now being shared between the forked processes the tracer is
returning the KSFT_SKIP value set by the tracee which is non 0.

Remove the setting of the _metadata.exit_code in teardown_trace_fixture.

Fixes: 24cf65a62266 ("selftests/harness: Share _metadata between forked processes")
Signed-off-by: Terry Tritton &lt;terry.tritton@linaro.org&gt;
Link: https://lore.kernel.org/r/20250509115622.64775-1-terry.tritton@linaro.org
Signed-off-by: Kees Cook &lt;kees@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 73989c998814d82c71d523c104c398925470d59e ]

TRACE_syscall.ptrace.negative_ENOSYS and TRACE_syscall.seccomp.negative_ENOSYS
on arm32 are being reported as failures instead of skipping.

The teardown_trace_fixture function sets the test to KSFT_FAIL in case of a
non 0 return value from the tracer process.
Due to _metadata now being shared between the forked processes the tracer is
returning the KSFT_SKIP value set by the tracee which is non 0.

Remove the setting of the _metadata.exit_code in teardown_trace_fixture.

Fixes: 24cf65a62266 ("selftests/harness: Share _metadata between forked processes")
Signed-off-by: Terry Tritton &lt;terry.tritton@linaro.org&gt;
Link: https://lore.kernel.org/r/20250509115622.64775-1-terry.tritton@linaro.org
Signed-off-by: Kees Cook &lt;kees@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/seccomp: fix syscall_restart test for arm compat</title>
<updated>2025-06-19T13:31:37+00:00</updated>
<author>
<name>Neill Kapron</name>
<email>nkapron@google.com</email>
</author>
<published>2025-04-27T09:40:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ebf467c0ba356c2aa3365cacb6e0a2d00e117815'/>
<id>ebf467c0ba356c2aa3365cacb6e0a2d00e117815</id>
<content type='text'>
[ Upstream commit 797002deed03491215a352ace891749b39741b69 ]

The inconsistencies in the systcall ABI between arm and arm-compat can
can cause a failure in the syscall_restart test due to the logic
attempting to work around the differences. The 'machine' field for an
ARM64 device running in compat mode can report 'armv8l' or 'armv8b'
which matches with the string 'arm' when only examining the first three
characters of the string.

This change adds additional validation to the workaround logic to make
sure we only take the arm path when running natively, not in arm-compat.

Fixes: 256d0afb11d6 ("selftests/seccomp: build and pass on arm64")
Signed-off-by: Neill Kapron &lt;nkapron@google.com&gt;
Link: https://lore.kernel.org/r/20250427094103.3488304-2-nkapron@google.com
Signed-off-by: Kees Cook &lt;kees@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 797002deed03491215a352ace891749b39741b69 ]

The inconsistencies in the systcall ABI between arm and arm-compat can
can cause a failure in the syscall_restart test due to the logic
attempting to work around the differences. The 'machine' field for an
ARM64 device running in compat mode can report 'armv8l' or 'armv8b'
which matches with the string 'arm' when only examining the first three
characters of the string.

This change adds additional validation to the workaround logic to make
sure we only take the arm path when running natively, not in arm-compat.

Fixes: 256d0afb11d6 ("selftests/seccomp: build and pass on arm64")
Signed-off-by: Neill Kapron &lt;nkapron@google.com&gt;
Link: https://lore.kernel.org/r/20250427094103.3488304-2-nkapron@google.com
Signed-off-by: Kees Cook &lt;kees@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kselftest: cpufreq: Get rid of double suspend in rtcwake case</title>
<updated>2025-06-19T13:31:28+00:00</updated>
<author>
<name>Nícolas F. R. A. Prado</name>
<email>nfraprado@collabora.com</email>
</author>
<published>2025-04-30T14:55:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bf3cbf2805b4a3ad704485de7c2b599aa8be6956'/>
<id>bf3cbf2805b4a3ad704485de7c2b599aa8be6956</id>
<content type='text'>
[ Upstream commit 23b88515a318680337f21d0a2fceee8038ccffc8 ]

Commit 0b631ed3ce92 ("kselftest: cpufreq: Add RTC wakeup alarm") added
support for automatic wakeup in the suspend routine of the cpufreq
kselftest by using rtcwake, however it left the manual power state
change in the common path. The end result is that when running the
cpufreq kselftest with '-t suspend_rtc' or '-t hibernate_rtc', the
system will go to sleep and be woken up by the RTC, but then immediately
go to sleep again with no wakeup programmed, so it will sleep forever in
an automated testing setup.

Fix this by moving the manual power state change so that it only happens
when not using rtcwake.

Link: https://lore.kernel.org/r/20250430-ksft-cpufreq-suspend-rtc-double-fix-v1-1-dc17a729c5a7@collabora.com
Fixes: 0b631ed3ce92 ("kselftest: cpufreq: Add RTC wakeup alarm")
Signed-off-by: Nícolas F. R. A. Prado &lt;nfraprado@collabora.com&gt;
Signed-off-by: Shuah Khan &lt;skhan@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 23b88515a318680337f21d0a2fceee8038ccffc8 ]

Commit 0b631ed3ce92 ("kselftest: cpufreq: Add RTC wakeup alarm") added
support for automatic wakeup in the suspend routine of the cpufreq
kselftest by using rtcwake, however it left the manual power state
change in the common path. The end result is that when running the
cpufreq kselftest with '-t suspend_rtc' or '-t hibernate_rtc', the
system will go to sleep and be woken up by the RTC, but then immediately
go to sleep again with no wakeup programmed, so it will sleep forever in
an automated testing setup.

Fix this by moving the manual power state change so that it only happens
when not using rtcwake.

Link: https://lore.kernel.org/r/20250430-ksft-cpufreq-suspend-rtc-double-fix-v1-1-dc17a729c5a7@collabora.com
Fixes: 0b631ed3ce92 ("kselftest: cpufreq: Add RTC wakeup alarm")
Signed-off-by: Nícolas F. R. A. Prado &lt;nfraprado@collabora.com&gt;
Signed-off-by: Shuah Khan &lt;skhan@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bridge: mdb: Allow replace of a host-joined group</title>
<updated>2025-05-29T09:03:01+00:00</updated>
<author>
<name>Petr Machata</name>
<email>petrm@nvidia.com</email>
</author>
<published>2025-02-04T17:37:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=58cdd1ee650b3e3af1b2f5ab3bf95f2005f09f4e'/>
<id>58cdd1ee650b3e3af1b2f5ab3bf95f2005f09f4e</id>
<content type='text'>
[ Upstream commit d9e9f6d7b7d0c520bb87f19d2cbc57aeeb2091d5 ]

Attempts to replace an MDB group membership of the host itself are
currently bounced:

 # ip link add name br up type bridge vlan_filtering 1
 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2
 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2
 Error: bridge: Group is already joined by host.

A similar operation done on a member port would succeed. Ignore the check
for replacement of host group memberships as well.

The bit of code that this enables is br_multicast_host_join(), which, for
already-joined groups only refreshes the MC group expiration timer, which
is desirable; and a userspace notification, also desirable.

Change a selftest that exercises this code path from expecting a rejection
to expecting a pass. The rest of MDB selftests pass without modification.

Signed-off-by: Petr Machata &lt;petrm@nvidia.com&gt;
Reviewed-by: Ido Schimmel &lt;idosch@nvidia.com&gt;
Acked-by: Nikolay Aleksandrov &lt;razor@blackwall.org&gt;
Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d9e9f6d7b7d0c520bb87f19d2cbc57aeeb2091d5 ]

Attempts to replace an MDB group membership of the host itself are
currently bounced:

 # ip link add name br up type bridge vlan_filtering 1
 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2
 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2
 Error: bridge: Group is already joined by host.

A similar operation done on a member port would succeed. Ignore the check
for replacement of host group memberships as well.

The bit of code that this enables is br_multicast_host_join(), which, for
already-joined groups only refreshes the MC group expiration timer, which
is desirable; and a userspace notification, also desirable.

Change a selftest that exercises this code path from expecting a rejection
to expecting a pass. The rest of MDB selftests pass without modification.

Signed-off-by: Petr Machata &lt;petrm@nvidia.com&gt;
Reviewed-by: Ido Schimmel &lt;idosch@nvidia.com&gt;
Acked-by: Nikolay Aleksandrov &lt;razor@blackwall.org&gt;
Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kunit: tool: Use qboot on QEMU x86_64</title>
<updated>2025-05-29T09:02:49+00:00</updated>
<author>
<name>Brendan Jackman</name>
<email>jackmanb@google.com</email>
</author>
<published>2025-01-24T11:01:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=12aeff4944dc6263d1e5b00001097ff40aed9180'/>
<id>12aeff4944dc6263d1e5b00001097ff40aed9180</id>
<content type='text'>
[ Upstream commit 08fafac4c9f289a9d9a22d838921e4b3eb22c664 ]

As noted in [0], SeaBIOS (QEMU default) makes a mess of the terminal,
qboot does not.

It turns out this is actually useful with kunit.py, since the user is
exposed to this issue if they set --raw_output=all.

qboot is also faster than SeaBIOS, but it's is marginal for this
usecase.

[0] https://lore.kernel.org/all/CA+i-1C0wYb-gZ8Mwh3WSVpbk-LF-Uo+njVbASJPe1WXDURoV7A@mail.gmail.com/

Both SeaBIOS and qboot are x86-specific.

Link: https://lore.kernel.org/r/20250124-kunit-qboot-v1-1-815e4d4c6f7c@google.com
Signed-off-by: Brendan Jackman &lt;jackmanb@google.com&gt;
Reviewed-by: David Gow &lt;davidgow@google.com&gt;
Signed-off-by: Shuah Khan &lt;skhan@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 08fafac4c9f289a9d9a22d838921e4b3eb22c664 ]

As noted in [0], SeaBIOS (QEMU default) makes a mess of the terminal,
qboot does not.

It turns out this is actually useful with kunit.py, since the user is
exposed to this issue if they set --raw_output=all.

qboot is also faster than SeaBIOS, but it's is marginal for this
usecase.

[0] https://lore.kernel.org/all/CA+i-1C0wYb-gZ8Mwh3WSVpbk-LF-Uo+njVbASJPe1WXDURoV7A@mail.gmail.com/

Both SeaBIOS and qboot are x86-specific.

Link: https://lore.kernel.org/r/20250124-kunit-qboot-v1-1-815e4d4c6f7c@google.com
Signed-off-by: Brendan Jackman &lt;jackmanb@google.com&gt;
Reviewed-by: David Gow &lt;davidgow@google.com&gt;
Signed-off-by: Shuah Khan &lt;skhan@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
