linux-stable.git/tools/testing, branch v5.4.82

selftests/bpf: Fix error return code in run_getsockopt_test()

2020-11-24T12:29:07+00:00

[ Upstream commit 2acc3c1bc8e98bc66b1badec42e9ea205b4fcdaa ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 65b4414a05eb ("selftests/bpf: add sockopt test that exercises BPF_F_ALLOW_MULTI")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20201116101633.64627-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin

selftests: kvm: Fix the segment descriptor layout to match the actual layout

2020-11-24T12:29:00+00:00

[ Upstream commit df11f7dd5834146defa448acba097e8d7703cc42 ]

Fix the layout of 'struct desc64' to match the layout described in the
SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5
"Segment Descriptors", Figure 3-8 "Segment Descriptor".  The test added
later in this series relies on this and crashes if this layout is not
correct.

Signed-off-by: Aaron Lewis 
Reviewed-by: Alexander Graf 
Message-Id: <20201012194716.3950330-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini 
Signed-off-by: Sasha Levin

selftests/powerpc: entry flush test

2020-11-22T09:14:11+00:00

commit 89a83a0c69c81a25ce91002b90ca27ed86132a0a upstream.

Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.

For simplicity of backporting, this test duplicates a lot of code from
the upstream rfi_flush. This is cleaned up upstream, but we don't clean
it up here because it would involve bringing in even more commits.

Signed-off-by: Daniel Axtens 
Signed-off-by: Greg Kroah-Hartman

selftests/powerpc: rfi_flush: disable entry flush if present

2020-11-22T09:14:10+00:00

commit fcb48454c23c5679d1a2e252f127642e91b05cbe upstream.

We are about to add an entry flush. The rfi (exit) flush test measures
the number of L1D flushes over a syscall with the RFI flush enabled and
disabled. But if the entry flush is also enabled, the effect of enabling
and disabling the RFI flush is masked.

If there is a debugfs entry for the entry flush, disable it during the RFI
flush and restore it later.

Reported-by: Spoorthy S 
Signed-off-by: Russell Currey 
Signed-off-by: Daniel Axtens 
Signed-off-by: Greg Kroah-Hartman

bpf: Zero-fill re-used per-cpu map element

2020-11-18T18:20:26+00:00

[ Upstream commit d3bec0138bfbe58606fc1d6f57a4cdc1a20218db ]

Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).

The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.

A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.

Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren 
Signed-off-by: Alexei Starovoitov 
Acked-by: Matthieu Baerts 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
Signed-off-by: Sasha Levin

selftests: proc: fix warning: _GNU_SOURCE redefined

2020-11-18T18:20:25+00:00

[ Upstream commit f3ae6c6e8a3ea49076d826c64e63ea78fbf9db43 ]

Makefile already contains -D_GNU_SOURCE, so we can remove it from the
*.c files.

Signed-off-by: Tommi Rantala 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests: pidfd: fix compilation errors due to wait.h

2020-11-18T18:20:22+00:00

[ Upstream commit 1948172fdba5ad643529ddcd00a601c0caa913ed ]

Drop unneeded  header inclusion to fix pidfd compilation
errors seen in Fedora 32:

In file included from pidfd_open_test.c:9:
../../../../usr/include/linux/wait.h:17:16: error: expected identifier before numeric constant
   17 | #define P_ALL  0
      |                ^

Signed-off-by: Tommi Rantala 
Reviewed-by: Kees Cook 
Acked-by: Christian Brauner 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/ftrace: check for do_sys_openat2 in user-memory test

2020-11-18T18:20:22+00:00

[ Upstream commit e3e40312567087fbe6880f316cb2b0e1f3d8a82c ]

More recent libc implementations are now using openat/openat2 system
calls so also add do_sys_openat2 to the tracing so that the test
passes on these systems because do_sys_open may not be called.

Thanks to Masami Hiramatsu for the help on getting this fix to work
correctly.

Signed-off-by: Colin Ian King 
Acked-by: Masami Hiramatsu 
Acked-by: Steven Rostedt (VMware) 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/x86/fsgsbase: Test PTRACE_PEEKUSER for GSBASE with invalid LDT GS

2020-11-05T10:43:23+00:00

commit 1b9abd1755ad947d7c9913e92e7837b533124c90 upstream.

This tests commit:

  8ab49526b53d ("x86/fsgsbase/64: Fix NULL deref in 86_fsgsbase_read_task")

Unpatched kernels will OOPS.

Signed-off-by: Andy Lutomirski 
Signed-off-by: Ingo Molnar 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c618ae86d1f757e01b1a8e79869f553cb88acf9a.1598461151.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: Define string const as global for test_sysctl_prog.c

2020-11-05T10:43:17+00:00

[ Upstream commit 6e057fc15a2da4ee03eb1fa6889cf687e690106e ]

When tweaking llvm optimizations, I found that selftest build failed
with the following error:
  libbpf: elf: skipping unrecognized data section(6) .rodata.str1.1
  libbpf: prog 'sysctl_tcp_mem': bad map relo against '.L__const.is_tcp_mem.tcp_mem_name'
          in section '.rodata.str1.1'
  Error: failed to open BPF object file: Relocation failed
  make: *** [/work/net-next/tools/testing/selftests/bpf/test_sysctl_prog.skel.h] Error 255
  make: *** Deleting file `/work/net-next/tools/testing/selftests/bpf/test_sysctl_prog.skel.h'

The local string constant "tcp_mem_name" is put into '.rodata.str1.1' section
which libbpf cannot handle. Using untweaked upstream llvm, "tcp_mem_name"
is completely inlined after loop unrolling.

Commit 7fb5eefd7639 ("selftests/bpf: Fix test_sysctl_loop{1, 2}
failure due to clang change") solved a similar problem by defining
the string const as a global. Let us do the same here
for test_sysctl_prog.c so it can weather future potential llvm changes.

Signed-off-by: Yonghong Song 
Signed-off-by: Alexei Starovoitov 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20200910202718.956042-1-yhs@fb.com
Signed-off-by: Sasha Levin