linux-stable.git/tools/testing, branch v5.4.252

selftests: tc: set timeout to 15 minutes

2023-07-27T06:37:40+00:00

commit fda05798c22a354efde09a76bdfc276b2d591829 upstream.

When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:

  not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds

The timeout had been introduced 3 years ago, see the Fixes commit below.

This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.

The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.

Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2]
Suggested-by: Pedro Tammela 
Signed-off-by: Matthieu Baerts 
Reviewed-by: Zhengchao Shao 
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-1-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests: rtnetlink: remove netdevsim device after ipsec offload test

2023-07-27T06:37:11+00:00

[ Upstream commit 5f789f103671fec3733ebe756e56adf15c90c21d ]

On systems where netdevsim is built-in or loaded before the test
starts, kci_test_ipsec_offload doesn't remove the netdevsim device it
created during the test.

Fixes: e05b2d141fef ("netdevsim: move netdev creation/destruction to dev probe")
Signed-off-by: Sabrina Dubroca 
Reviewed-by: Simon Horman 
Reviewed-by: Jiri Pirko 
Link: https://lore.kernel.org/r/e1cb94f4f82f4eca4a444feec4488a1323396357.1687466906.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET

2023-06-21T13:44:12+00:00

[ Upstream commit 76a4c8b82938bc5020b67663db41f451684bf327 ]

Previously, timestamps were printed using "%lld.%u" which is incorrect
for nanosecond values lower than 100,000,000 as they're fractional
digits, therefore leading zeros are meaningful.

This patch changes the format strings to "%lld.%09u" in order to add
leading zeros to the nanosecond value.

Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program")
Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility")
Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings")
Signed-off-by: Alex Maftei 
Acked-by: Richard Cochran 
Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests: fib_tests: mute cleanup error message

2023-05-30T11:44:10+00:00

commit d226b1df361988f885c298737d6019c863a25f26 upstream.

In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()

  Tests passed: 201
  Tests failed:   0
  Cannot remove namespace file "/run/netns/ns1": No such file or directory

This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.

Redirect the error message to /dev/null to mute it.

V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2

Fixes: b60417a9f2b8 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin 
Reviewed-by: Ido Schimmel 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

selftests/memfd: Fix unknown type name build failure

2023-05-30T11:44:09+00:00

Partially backport v6.3 commit 11f75a01448f ("selftests/memfd: add tests
for MFD_NOEXEC_SEAL MFD_EXEC") to fix an unknown type name build error.
In some systems, the __u64 typedef is not present due to differences in
system headers, causing compilation errors like this one:

fuse_test.c:64:8: error: unknown type name '__u64'
   64 | static __u64 mfd_assert_get_seals(int fd)

This header includes the  __u64 typedef which increases the likelihood
of successful compilation on a wider variety of systems.

Signed-off-by: Hardik Garg 
Reviewed-by: Tyler Hicks (Microsoft) 
Signed-off-by: Greg Kroah-Hartman

selftests: sigaltstack: fix -Wuninitialized

2023-04-26T09:24:03+00:00

[ Upstream commit 05107edc910135d27fe557267dc45be9630bf3dd ]

Building sigaltstack with clang via:
$ ARCH=x86 make LLVM=1 -C tools/testing/selftests/sigaltstack/

produces the following warning:
  warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
  if (sp < (unsigned long)sstack ||
      ^~

Clang expects these to be declared at global scope; we've fixed this in
the kernel proper by using the macro `current_stack_pointer`. This is
defined in different headers for different target architectures, so just
create a new header that defines the arch-specific register names for
the stack pointer register, and define it for more targets (at least the
ones that support current_stack_pointer/ARCH_HAS_CURRENT_STACK_POINTER).

Reported-by: Linux Kernel Functional Testing 
Link: https://lore.kernel.org/lkml/CA+G9fYsi3OOu7yCsMutpzKDnBMAzJBCPimBp86LhGBa0eCnEpA@mail.gmail.com/
Signed-off-by: Nick Desaulniers 
Reviewed-by: Kees Cook 
Tested-by: Linux Kernel Functional Testing 
Tested-by: Anders Roxell 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/bpf: check that modifier resolves after pointer

2023-04-05T09:16:39+00:00

[ Upstream commit dfdd608c3b365f0fd49d7e13911ebcde06b9865b ]

Add a regression test that ensures that a VAR pointing at a
modifier which follows a PTR (or STRUCT or ARRAY) is resolved
correctly by the datasec validator.

Signed-off-by: Lorenz Bauer 
Link: https://lore.kernel.org/r/20230306112138.155352-3-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau 
Signed-off-by: Sasha Levin

selftests: Fix the executable permissions for fib_tests.sh

2023-03-30T13:03:42+00:00

Commit 04a331c9dd66 reverted change 2537b637eac0 (ipv4: Fix
incorrect route flushing when source address is deleted) that
added the fib_tests.sh file back with wrong permissions.
Fix that in this commit.

Signed-off-by: Rishabh Bhatnagar 
Signed-off-by: Greg Kroah-Hartman

selftests: nft_nat: ensuring the listening side is up before starting the client

2023-03-17T07:32:51+00:00

[ Upstream commit 2067e7a00aa604b94de31d64f29b8893b1696f26 ]

The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.

Before the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
  2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
  ERROR: inet port rewrite

After the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
  PASS: inet port rewrite without l3 address

Fixes: 282e5f8fe907 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

ktest.pl: Add RUN_TIMEOUT option with default unlimited

2023-03-11T15:44:05+00:00

commit 4e7d2a8f0b52abf23b1dc13b3d88bc0923383cd5 upstream.

There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.

Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".

But this fixes the hang that happens when the pipe is full and the ssh
session never exits.

Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman