linux-stable.git/tools/testing, branch v5.4.2

selftests: pmtu: use -oneline for ip route list cache

2019-12-04T21:31:04+00:00

[ Upstream commit 2745aea6750ff0d2c48285d25bdb00e5b636ec8b ]

Some versions of iproute2 will output more than one line per entry, which
will cause the test to fail, like:

TEST: ipv6: list and flush cached exceptions                        [FAIL]
  can't list cached exceptions

That happens, for example, with iproute2 4.15.0. When using the -oneline
option, this will work just fine:

TEST: ipv6: list and flush cached exceptions                        [ OK ]

This also works just fine with a more recent version of iproute2, like
5.4.0.

For some reason, two lines are printed for the IPv4 test no matter what
version of iproute2 is used. Use the same -oneline parameter there instead
of counting the lines twice.

Fixes: b964641e9925 ("selftests: pmtu: Make list_flush_ipv6_exception test more demanding")
Signed-off-by: Thadeu Lima de Souza Cascardo 
Acked-by: Stefano Brivio 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

selftests: bpf: correct perror strings

2019-12-04T21:31:03+00:00

[ Upstream commit e5dc9dd3258098bf8b5ceb75fc3433b41eff618a ]

perror(str) is basically equivalent to
print("%s: %s\n", str, strerror(errno)).
New line or colon at the end of str is
a mistake/breaks formatting.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

selftests: bpf: test_sockmap: handle file creation failures gracefully

2019-12-04T21:31:03+00:00

[ Upstream commit 4b67c515036313f3c3ecba3cb2babb9cbddb3f85 ]

test_sockmap creates a temporary file to use for sendpage.
this may fail for various reasons. Handle the error rather
than segfault.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

selftests/tls: add a test for fragmented messages

2019-12-04T21:31:01+00:00

[ Upstream commit 65190f77424d7b82c4aad7326c9cce6bd91a2fcc ]

Add a sendmsg test with very fragmented messages. This should
fill up sk_msg and test the boundary conditions.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel

2019-11-29T09:09:59+00:00

commit 4d2fa82d98d2d296043a04eb517d7dbade5b13b8 upstream.

If the kernel accidentally uses DS or ES while the user values are
loaded, it will work fine for sane userspace.  In the interest of
simulating maximally insane userspace, make sigreturn_32 zero out DS
and ES for the nasty parts so that inadvertent use of these segments
will crash.

Signed-off-by: Andy Lutomirski 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman

selftests/x86/mov_ss_trap: Fix the SYSENTER test

2019-11-29T09:09:58+00:00

commit 8caa016bfc129f2c925d52da43022171d1d1de91 upstream.

For reasons that I haven't quite fully diagnosed, running
mov_ss_trap_32 on a 32-bit kernel results in an infinite loop in
userspace.  This appears to be because the hacky SYSENTER test
doesn't segfault as desired; instead it corrupts the program state
such that it infinite loops.

Fix it by explicitly clearing EBP before doing SYSENTER.  This will
give a more reliable segfault.

Fixes: 59c2a7226fc5 ("x86/selftests: Add mov_to_ss test")
Signed-off-by: Andy Lutomirski 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-11-16T23:52:00+00:00

Pull networking fixes from David Miller:

 1) Fix memory leak in xfrm_state code, from Steffen Klassert.

 2) Fix races between devlink reload operations and device
    setup/cleanup, from Jiri Pirko.

 3) Null deref in NFC code, from Stephan Gerhold.

 4) Refcount fixes in SMC, from Ursula Braun.

 5) Memory leak in slcan open error paths, from Jouni Hogander.

 6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.

 7) Info leak on short USB request answers in ax88172a driver, from
    Oliver Neukum.

 8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.

 9) PTP config timestamp flags validation, from Richard Cochran.

10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.

11) Missing free_netdev() in gemini driver, from Chuhong Yuan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
  ipmr: Fix skb headroom in ipmr_get_route().
  net: hns3: cleanup of stray struct hns3_link_mode_mapping
  net/smc: fix fastopen for non-blocking connect()
  rds: ib: update WR sizes when bringing up connection
  net: gemini: add missed free_netdev
  net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
  seg6: fix skb transport_header after decap_and_validate()
  seg6: fix srh pointer in get_srh()
  net: stmmac: Use the correct style for SPDX License Identifier
  octeontx2-af: Use the correct style for SPDX License Identifier
  ptp: Extend the test program to check the external time stamp flags.
  mlx5: Reject requests to enable time stamping on both edges.
  igb: Reject requests that fail to enable time stamping on both edges.
  dp83640: Reject requests to enable time stamping on both edges.
  mv88e6xxx: Reject requests to enable time stamping on both edges.
  ptp: Introduce strict checking of external time stamp options.
  renesas: reject unsupported external timestamp flags
  mlx5: reject unsupported external timestamp flags
  igb: reject unsupported external timestamp flags
  dp83640: reject unsupported external timestamp flags
  ...

ptp: Extend the test program to check the external time stamp flags.

2019-11-15T20:48:33+00:00

Because each driver and hardware has different capabilities, the test
cannot provide a simple pass/fail result, but it can at least show what
combinations of flags are supported.

Signed-off-by: Richard Cochran 
Signed-off-by: David S. Miller

selftests: mlxsw: Adjust test to recent changes

2019-11-15T20:14:38+00:00

mlxsw does not support VXLAN devices with a physical device attached and
vetoes such configurations upon enslavement to an offloaded bridge.

Commit 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
changed the VXLAN device to be an upper of the physical device which
causes mlxsw to veto the creation of the VXLAN device with "Unknown
upper device type".

This is OK as this configuration is not supported, but it prevents us
from testing bad flows involving the enslavement of VXLAN devices with a
physical device to a bridge, regardless if the physical device is an
mlxsw netdev or not.

Adjust the test to use a dummy device as a physical device instead of a
mlxsw netdev.

Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Signed-off-by: Ido Schimmel 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller

selftests: kvm: fix build with glibc >= 2.30

2019-11-13T14:48:00+00:00

Glibc-2.30 gained gettid() wrapper, selftests fail to compile:

lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration
   58 | static pid_t gettid(void)
      |              ^~~~~~
In file included from /usr/include/unistd.h:1170,
                 from include/test_util.h:18,
                 from lib/assert.c:10:
/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
   34 | extern __pid_t gettid (void) __THROW;
      |                ^~~~~~

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: Paolo Bonzini