linux-stable.git/tools/testing, branch v5.4.112

flow_dissector: fix TTL and TOS dissection on IPv4 fragments

2021-04-07T12:47:40+00:00

[ Upstream commit d2126838050ccd1dadf310ffb78b2204f3b032b9 ]

the following command:

 # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
   $tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop

doesn't drop all IPv4 packets that match the configured TTL / destination
address. In particular, if "fragment offset" or "more fragments" have non
zero value in the IPv4 header, setting of FLOW_DISSECTOR_KEY_IP is simply
ignored. Fix this dissecting IPv4 TTL and TOS before fragment info; while
at it, add a selftest for tc flower's match on 'ip_ttl' that verifies the
correct behavior.

Fixes: 518d8a2e9bad ("net/flow_dissector: add support for dissection of misc ip header fields")
Reported-by: Shuang Li 
Signed-off-by: Davide Caratti 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

selftests: forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value

2021-03-30T12:35:27+00:00

[ Upstream commit 5aa3c334a449bab24519c4967f5ac2b3304c8dcf ]

The ECN bit defines ECT(1) = 1, ECT(0) = 2. So inner 0x02 + outer 0x01
should be inner ECT(0) + outer ECT(1). Based on the description of
__INET_ECN_decapsulate, the final decapsulate value should be
ECT(1). So fix the test expect value to 0x01.

Before the fix:
TEST: VXLAN: ECN decap: 01/02->0x02                                 [FAIL]
        Expected to capture 10 packets, got 0.

After the fix:
TEST: VXLAN: ECN decap: 01/02->0x01                                 [ OK ]

Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

selftests/bpf: Set gopt opt_class to 0 if get tunnel opt failed

2021-03-30T12:35:25+00:00

[ Upstream commit 31254dc9566221429d2cfb45fd5737985d70f2b6 ]

When fixing the bpf test_tunnel.sh geneve failure. I only fixed the IPv4
part but forgot the IPv6 issue. Similar with the IPv4 fixes 557c223b643a
("selftests/bpf: No need to drop the packet when there is no geneve opt"),
when there is no tunnel option and bpf_skb_get_tunnel_opt() returns error,
there is no need to drop the packets and break all geneve rx traffic.
Just set opt_class to 0 and keep returning TC_ACT_OK at the end.

Fixes: 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt")
Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu 
Signed-off-by: Daniel Borkmann 
Acked-by: William Tu 
Link: https://lore.kernel.org/bpf/20210309032214.2112438-1-liuhangbin@gmail.com
Signed-off-by: Sasha Levin

bpf, selftests: Fix up some test_verifier cases for unprivileged

2021-03-20T09:39:46+00:00

commit 0a13e3537ea67452d549a6a80da3776d6b7dedb3 upstream.

Fix up test_verifier error messages for the case where the original error
message changed, or for the case where pointer alu errors differ between
privileged and unprivileged tests. Also, add alternative tests for keeping
coverage of the original verifier rejection error message (fp alu), and
newly reject map_ptr += rX where rX == 0 given we now forbid alu on these
types for unprivileged. All test_verifier cases pass after the change. The
test case fixups were kept separate to ease backporting of core changes.

Signed-off-by: Piotr Krysiuk 
Co-developed-by: Daniel Borkmann 
Signed-off-by: Daniel Borkmann 
Acked-by: Alexei Starovoitov 
Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: Fix race condition in mirror installation

2021-03-17T16:03:37+00:00

commit edcbf5137f093b5502f5f6b97cce3cbadbde27aa upstream.

When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.

If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.

Fix this by setting the neighbor's state to permanent, so that it is
always valid.

Fixes: b5b029399fa6d ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test")
Signed-off-by: Danielle Ratson 
Reviewed-by: Petr Machata 
Signed-off-by: Ido Schimmel 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: Mask bpf_csum_diff() return value to 16 bits in test_verifier

2021-03-17T16:03:33+00:00

commit 6185266c5a853bb0f2a459e3ff594546f277609b upstream.

The verifier test labelled "valid read map access into a read-only array
2" calls the bpf_csum_diff() helper and checks its return value. However,
architecture implementations of csum_partial() (which is what the helper
uses) differ in whether they fold the return value to 16 bit or not. For
example, x86 version has ...

	if (unlikely(odd)) {
		result = from32to16(result);
		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
	}

... while generic lib/checksum.c does:

	result = from32to16(result);
	if (odd)
		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);

This makes the helper return different values on different architectures,
breaking the test on non-x86. To fix this, add an additional instruction
to always mask the return value to 16 bits, and update the expected return
value accordingly.

Fixes: fb2abb73e575 ("bpf, selftest: test {rd, wr}only flags and direct value access")
Signed-off-by: Yauheni Kaliuta 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20210228103017.320240-1-yauheni.kaliuta@redhat.com
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: No need to drop the packet when there is no geneve opt

2021-03-17T16:03:32+00:00

commit 557c223b643a35effec9654958d8edc62fd2603a upstream.

In bpf geneve tunnel test we set geneve option on tx side. On rx side we
only call bpf_skb_get_tunnel_opt(). Since commit 9c2e14b48119 ("ip_tunnels:
Set tunnel option flag when tunnel metadata is present") geneve_rx() will
not add TUNNEL_GENEVE_OPT flag if there is no geneve option, which cause
bpf_skb_get_tunnel_opt() return ENOENT and _geneve_get_tunnel() in
test_tunnel_kern.c drop the packet.

As it should be valid that bpf_skb_get_tunnel_opt() return error when
there is not tunnel option, there is no need to drop the packet and
break all geneve rx traffic. Just set opt_class to 0 in this test and
keep returning TC_ACT_OK.

Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu 
Signed-off-by: Daniel Borkmann 
Acked-by: William Tu 
Link: https://lore.kernel.org/bpf/20210224081403.1425474-1-liuhangbin@gmail.com
Signed-off-by: Greg Kroah-Hartman

selftests/powerpc: Make the test check in eeh-basic.sh posix compliant

2021-03-04T09:26:26+00:00

[ Upstream commit 3db380570af7052620ace20c29e244938610ca71 ]

The == operand is a bash extension, thus this will fail on Ubuntu
with:
  ./eeh-basic.sh: 89: test: 2: unexpected operator

As the /bin/sh on Ubuntu is pointed to DASH.

Use -eq to fix this posix compatibility issue.

Fixes: 996f9e0f93f162 ("selftests/powerpc: Fix eeh-basic.sh exit codes")
Signed-off-by: Po-Hsu Lin 
Reviewed-by: Frederic Barrat 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com
Signed-off-by: Sasha Levin

selftests: txtimestamp: fix compilation issue

2021-02-17T09:35:17+00:00

[ Upstream commit 647b8dd5184665432cc8a2b5bca46a201f690c37 ]

PACKET_TX_TIMESTAMP is defined in if_packet.h but it is not included in
test. Include it instead of  otherwise the error of
redefinition arrives.
Also fix the compiler warning about ambiguous control flow by adding
explicit braces.

Fixes: 8fe2f761cae9 ("net-timestamp: expand documentation")
Suggested-by: Willem de Bruijn 
Signed-off-by: Vadim Fedorenko 
Acked-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/1612461034-24524-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests/powerpc: Only test lwm/stmw on big endian

2021-02-07T14:35:49+00:00

[ Upstream commit dd3a44c06f7b4f14e90065bf05d62c255b20005f ]

Newer binutils (>= 2.36) refuse to assemble lmw/stmw when building in
little endian mode. That breaks compilation of our alignment handler
test:

  /tmp/cco4l14N.s: Assembler messages:
  /tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian
  /tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian
  make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1

These tests do pass on little endian machines, as the kernel will
still emulate those instructions even when running little
endian (which is arguably a kernel bug).

But we don't really need to test that case, so ifdef those
instructions out to get the alignment test building again.

Reported-by: Libor Pechacek 
Signed-off-by: Michael Ellerman 
Tested-by: Libor Pechacek 
Link: https://lore.kernel.org/r/20210119041800.3093047-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin