<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/tools/testing, branch v5.10.87</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>netfilter: selftest: conntrack_vrf.sh: fix file permission</title>
<updated>2021-12-16T15:38:33+00:00</updated>
<author>
<name>Greg Kroah-Hartman</name>
<email>gregkh@linuxfoundation.org</email>
</author>
<published>2021-12-16T14:15:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=32414491834c80ab39519467deb3f8d1e4f5bade'/>
<id>32414491834c80ab39519467deb3f8d1e4f5bade</id>
<content type='text'>
When backporting 33b8aad21ac1 ("selftests: netfilter: add a
vrf+conntrack testcase") to this stable branch, the executable bits were
not properly set on the
tools/testing/selftests/netfilter/conntrack_vrf.sh file due to quilt not
honoring them.

Fix this up manually by setting the correct mode.

Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" &lt;tommi.t.rantala@nokia.com&gt;
Link: https://lore.kernel.org/r/234d7a6a81664610fdf21ac72730f8bd10d3f46f.camel@nokia.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When backporting 33b8aad21ac1 ("selftests: netfilter: add a
vrf+conntrack testcase") to this stable branch, the executable bits were
not properly set on the
tools/testing/selftests/netfilter/conntrack_vrf.sh file due to quilt not
honoring them.

Fix this up manually by setting the correct mode.

Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" &lt;tommi.t.rantala@nokia.com&gt;
Link: https://lore.kernel.org/r/234d7a6a81664610fdf21ac72730f8bd10d3f46f.camel@nokia.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Add selftests to cover packet access corner cases</title>
<updated>2021-12-14T10:32:46+00:00</updated>
<author>
<name>Maxim Mikityanskiy</name>
<email>maximmi@nvidia.com</email>
</author>
<published>2021-12-07T08:15:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d428e5477493946b77d1071e84b1475241974930'/>
<id>d428e5477493946b77d1071e84b1475241974930</id>
<content type='text'>
commit b560b21f71eb4ef9dfc7c8ec1d0e4d7f9aa54b51 upstream.

This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: &lt;, &gt;, &lt;=, &gt;=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:

1. Length is just enough for an 8-byte read. Length is either 7 or 8,
   depending on the comparison.

2. Length is increased by 1 - should still pass the verifier. These
   cases are useful, because they failed before commit 2fa7d94afc1a
   ("bpf: Fix the off-by-two error in range markings").

3. Length is decreased by 1 - should be rejected by the verifier.

Some existing tests are just renamed to avoid duplication.

Signed-off-by: Maxim Mikityanskiy &lt;maximmi@nvidia.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit b560b21f71eb4ef9dfc7c8ec1d0e4d7f9aa54b51 upstream.

This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: &lt;, &gt;, &lt;=, &gt;=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:

1. Length is just enough for an 8-byte read. Length is either 7 or 8,
   depending on the comparison.

2. Length is increased by 1 - should still pass the verifier. These
   cases are useful, because they failed before commit 2fa7d94afc1a
   ("bpf: Fix the off-by-two error in range markings").

3. Length is decreased by 1 - should be rejected by the verifier.

Some existing tests are just renamed to avoid duplication.

Signed-off-by: Maxim Mikityanskiy &lt;maximmi@nvidia.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/fib_tests: Rework fib_rp_filter_test()</title>
<updated>2021-12-14T10:32:43+00:00</updated>
<author>
<name>Peilin Ye</name>
<email>peilin.ye@bytedance.com</email>
</author>
<published>2021-12-01T00:47:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=63fc70bffa16de431a51da7f530011de1b469780'/>
<id>63fc70bffa16de431a51da7f530011de1b469780</id>
<content type='text'>
commit f6071e5e3961eeb5300bd0901c9e128598730ae3 upstream.

Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are
failing.  ping sockets are bound to dummy1 using the "-I" option
(SO_BINDTODEVICE), but socket lookup is failing when receiving ping
replies, since the routing table thinks they belong to dummy0.

For example, suppose ping is using a SOCK_RAW socket for ICMP messages.
When receiving ping replies, in __raw_v4_lookup(), sk-&gt;sk_bound_dev_if
is 3 (dummy1), but dif (skb_rtable(skb)-&gt;rt_iif) says 2 (dummy0), so the
raw_sk_bound_dev_eq() check fails.  Similar things happen in
ping_lookup() for SOCK_DGRAM sockets.

These tests used to pass due to a bug [1] in iputils, where "ping -I"
actually did not bind ICMP message sockets to device.  The bug has been
fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket
to the specific device") in 2016, which is why our rp_filter tests
started to fail.  See [2] .

Fixing the tests while keeping everything in one netns turns out to be
nontrivial.  Rework the tests and build the following topology:

 ┌─────────────────────────────┐    ┌─────────────────────────────┐
 │  network namespace 1 (ns1)  │    │  network namespace 2 (ns2)  │
 │                             │    │                             │
 │  ┌────┐     ┌─────┐         │    │  ┌─────┐            ┌────┐  │
 │  │ lo │&lt;───&gt;│veth1│&lt;────────┼────┼─&gt;│veth2│&lt;──────────&gt;│ lo │  │
 │  └────┘     ├─────┴──────┐  │    │  ├─────┴──────┐     └────┘  │
 │             │192.0.2.1/24│  │    │  │192.0.2.1/24│             │
 │             └────────────┘  │    │  └────────────┘             │
 └─────────────────────────────┘    └─────────────────────────────┘

Consider sending an ICMP_ECHO packet A in ns2.  Both source and
destination IP addresses are 192.0.2.1, and we use strict mode rp_filter
in both ns1 and ns2:

  1. A is routed to lo since its destination IP address is one of ns2's
     local addresses (veth2);
  2. A is redirected from lo's egress to veth2's egress using mirred;
  3. A arrives at veth1's ingress in ns1;
  4. A is redirected from veth1's ingress to lo's ingress, again, using
     mirred;
  5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false,
     since A was received on lo, but reverse path lookup says veth1;
  6. However A is not dropped since we have relaxed this check for lo in
     commit 66f8209547cc ("fib: relax source validation check for loopback
     packets");

Making sure A is not dropped here in this corner case is the whole point
of having this test.

  7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is
     generated;
  8. Similarly, B is redirected from lo's egress to veth1's egress (in
     ns1), then redirected once again from veth2's ingress to lo's
     ingress (in ns2), using mirred.

Also test "ping 127.0.0.1" from ns2.  It does not trigger the relaxed
check in __fib_validate_source(), but just to make sure the topology
works with loopback addresses.

Tested with ping from iputils 20210722-41-gf9fb573:

$ ./fib_tests.sh -t rp_filter

IPv4 rp_filter tests
    TEST: rp_filter passes local packets		[ OK ]
    TEST: rp_filter passes loopback packets		[ OK ]

[1] https://github.com/iputils/iputils/issues/55
[2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1d

Reported-by: Hangbin Liu &lt;liuhangbin@gmail.com&gt;
Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter")
Reviewed-by: Cong Wang &lt;cong.wang@bytedance.com&gt;
Signed-off-by: Peilin Ye &lt;peilin.ye@bytedance.com&gt;
Acked-by: David Ahern &lt;dsahern@kernel.org&gt;
Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f6071e5e3961eeb5300bd0901c9e128598730ae3 upstream.

Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are
failing.  ping sockets are bound to dummy1 using the "-I" option
(SO_BINDTODEVICE), but socket lookup is failing when receiving ping
replies, since the routing table thinks they belong to dummy0.

For example, suppose ping is using a SOCK_RAW socket for ICMP messages.
When receiving ping replies, in __raw_v4_lookup(), sk-&gt;sk_bound_dev_if
is 3 (dummy1), but dif (skb_rtable(skb)-&gt;rt_iif) says 2 (dummy0), so the
raw_sk_bound_dev_eq() check fails.  Similar things happen in
ping_lookup() for SOCK_DGRAM sockets.

These tests used to pass due to a bug [1] in iputils, where "ping -I"
actually did not bind ICMP message sockets to device.  The bug has been
fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket
to the specific device") in 2016, which is why our rp_filter tests
started to fail.  See [2] .

Fixing the tests while keeping everything in one netns turns out to be
nontrivial.  Rework the tests and build the following topology:

 ┌─────────────────────────────┐    ┌─────────────────────────────┐
 │  network namespace 1 (ns1)  │    │  network namespace 2 (ns2)  │
 │                             │    │                             │
 │  ┌────┐     ┌─────┐         │    │  ┌─────┐            ┌────┐  │
 │  │ lo │&lt;───&gt;│veth1│&lt;────────┼────┼─&gt;│veth2│&lt;──────────&gt;│ lo │  │
 │  └────┘     ├─────┴──────┐  │    │  ├─────┴──────┐     └────┘  │
 │             │192.0.2.1/24│  │    │  │192.0.2.1/24│             │
 │             └────────────┘  │    │  └────────────┘             │
 └─────────────────────────────┘    └─────────────────────────────┘

Consider sending an ICMP_ECHO packet A in ns2.  Both source and
destination IP addresses are 192.0.2.1, and we use strict mode rp_filter
in both ns1 and ns2:

  1. A is routed to lo since its destination IP address is one of ns2's
     local addresses (veth2);
  2. A is redirected from lo's egress to veth2's egress using mirred;
  3. A arrives at veth1's ingress in ns1;
  4. A is redirected from veth1's ingress to lo's ingress, again, using
     mirred;
  5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false,
     since A was received on lo, but reverse path lookup says veth1;
  6. However A is not dropped since we have relaxed this check for lo in
     commit 66f8209547cc ("fib: relax source validation check for loopback
     packets");

Making sure A is not dropped here in this corner case is the whole point
of having this test.

  7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is
     generated;
  8. Similarly, B is redirected from lo's egress to veth1's egress (in
     ns1), then redirected once again from veth2's ingress to lo's
     ingress (in ns2), using mirred.

Also test "ping 127.0.0.1" from ns2.  It does not trigger the relaxed
check in __fib_validate_source(), but just to make sure the topology
works with loopback addresses.

Tested with ping from iputils 20210722-41-gf9fb573:

$ ./fib_tests.sh -t rp_filter

IPv4 rp_filter tests
    TEST: rp_filter passes local packets		[ OK ]
    TEST: rp_filter passes loopback packets		[ OK ]

[1] https://github.com/iputils/iputils/issues/55
[2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1d

Reported-by: Hangbin Liu &lt;liuhangbin@gmail.com&gt;
Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter")
Reviewed-by: Cong Wang &lt;cong.wang@bytedance.com&gt;
Signed-off-by: Peilin Ye &lt;peilin.ye@bytedance.com&gt;
Acked-by: David Ahern &lt;dsahern@kernel.org&gt;
Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Fix the off-by-two error in range markings</title>
<updated>2021-12-14T10:32:36+00:00</updated>
<author>
<name>Maxim Mikityanskiy</name>
<email>maximmi@nvidia.com</email>
</author>
<published>2021-11-30T18:16:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=349e83c0cf674e3d5820f475aed4fa565519fcbe'/>
<id>349e83c0cf674e3d5820f475aed4fa565519fcbe</id>
<content type='text'>
commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.

The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):

  // 1. Passes the verifier:
  if (data + 8 &gt; data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

  // 2. Rejected by the verifier (should still pass):
  if (data + 7 &gt;= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:

  // 3. Rejected by the verifier, but the check is stricter than in #1.
  if (data + 8 &gt;= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.

This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.

Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy &lt;maximmi@nvidia.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.

The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):

  // 1. Passes the verifier:
  if (data + 8 &gt; data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

  // 2. Rejected by the verifier (should still pass):
  if (data + 7 &gt;= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:

  // 3. Rejected by the verifier, but the check is stricter than in #1.
  if (data + 8 &gt;= data_end)
      return early
  read *(u64 *)data, i.e. [data; data+7]

The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.

This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.

Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy &lt;maximmi@nvidia.com&gt;
Signed-off-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>vrf: don't run conntrack on vrf with !dflt qdisc</title>
<updated>2021-12-14T10:32:36+00:00</updated>
<author>
<name>Nicolas Dichtel</name>
<email>nicolas.dichtel@6wind.com</email>
</author>
<published>2021-11-26T14:36:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=74685aaecef07f59d814e4eed877094c50260e9e'/>
<id>74685aaecef07f59d814e4eed877094c50260e9e</id>
<content type='text'>
commit d43b75fbc23f0ac1ef9c14a5a166d3ccb761a451 upstream.

After the below patch, the conntrack attached to skb is set to "notrack" in
the context of vrf device, for locally generated packets.
But this is true only when the default qdisc is set to the vrf device. When
changing the qdisc, notrack is not set anymore.
In fact, there is a shortcut in the vrf driver, when the default qdisc is
set, see commit dcdd43c41e60 ("net: vrf: performance improvements for
IPv4") for more details.

This patch ensures that the behavior is always the same, whatever the qdisc
is.

To demonstrate the difference, a new test is added in conntrack_vrf.sh.

Fixes: 8c9c296adfae ("vrf: run conntrack only in context of lower/physdev for locally generated packets")
Signed-off-by: Nicolas Dichtel &lt;nicolas.dichtel@6wind.com&gt;
Acked-by: Florian Westphal &lt;fw@strlen.de&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit d43b75fbc23f0ac1ef9c14a5a166d3ccb761a451 upstream.

After the below patch, the conntrack attached to skb is set to "notrack" in
the context of vrf device, for locally generated packets.
But this is true only when the default qdisc is set to the vrf device. When
changing the qdisc, notrack is not set anymore.
In fact, there is a shortcut in the vrf driver, when the default qdisc is
set, see commit dcdd43c41e60 ("net: vrf: performance improvements for
IPv4") for more details.

This patch ensures that the behavior is always the same, whatever the qdisc
is.

To demonstrate the difference, a new test is added in conntrack_vrf.sh.

Fixes: 8c9c296adfae ("vrf: run conntrack only in context of lower/physdev for locally generated packets")
Signed-off-by: Nicolas Dichtel &lt;nicolas.dichtel@6wind.com&gt;
Acked-by: Florian Westphal &lt;fw@strlen.de&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: netfilter: add a vrf+conntrack testcase</title>
<updated>2021-12-14T10:32:36+00:00</updated>
<author>
<name>Florian Westphal</name>
<email>fw@strlen.de</email>
</author>
<published>2021-10-18T12:38:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d5cf399a6dc3b35b91fbd2cb002581e2c1970143'/>
<id>d5cf399a6dc3b35b91fbd2cb002581e2c1970143</id>
<content type='text'>
commit 33b8aad21ac175eba9577a73eb62b0aa141c241c upstream.

Rework the reproducer for the vrf+conntrack regression reported
by Eugene into a selftest and also add a test for ip masquerading
that Lahav fixed recently.

With net or net-next tree, the first test fails and the latter
two pass.

With 09e856d54bda5f28 ("vrf: Reset skb conntrack connection on VRF rcv")
reverted first test passes but the last two fail.

A proper fix needs more work, for time being a revert seems to be
the best choice, snat/masquerade did not work before the fix.

Link: https://lore.kernel.org/netdev/378ca299-4474-7e9a-3d36-2350c8c98995@gmail.com/T/#m95358a31810df7392f541f99d187227bc75c9963
Reported-by: Eugene Crosser &lt;crosser@average.org&gt;
Cc: Lahav Schlesinger &lt;lschlesinger@drivenets.com&gt;
Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 33b8aad21ac175eba9577a73eb62b0aa141c241c upstream.

Rework the reproducer for the vrf+conntrack regression reported
by Eugene into a selftest and also add a test for ip masquerading
that Lahav fixed recently.

With net or net-next tree, the first test fails and the latter
two pass.

With 09e856d54bda5f28 ("vrf: Reset skb conntrack connection on VRF rcv")
reverted first test passes but the last two fail.

A proper fix needs more work, for time being a revert seems to be
the best choice, snat/masquerade did not work before the fix.

Link: https://lore.kernel.org/netdev/378ca299-4474-7e9a-3d36-2350c8c98995@gmail.com/T/#m95358a31810df7392f541f99d187227bc75c9963
Reported-by: Eugene Crosser &lt;crosser@average.org&gt;
Cc: Lahav Schlesinger &lt;lschlesinger@drivenets.com&gt;
Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: net: Correct case name</title>
<updated>2021-12-08T08:03:24+00:00</updated>
<author>
<name>Li Zhijian</name>
<email>lizhijian@cn.fujitsu.com</email>
</author>
<published>2021-12-02T02:28:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a0335cda6d921462af0c6d9d33103cada4862523'/>
<id>a0335cda6d921462af0c6d9d33103cada4862523</id>
<content type='text'>
commit a05431b22be819d75db72ca3d44381d18a37b092 upstream.

ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names

Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Signed-off-by: Li Zhijian &lt;lizhijian@cn.fujitsu.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a05431b22be819d75db72ca3d44381d18a37b092 upstream.

ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names

Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Signed-off-by: Li Zhijian &lt;lizhijian@cn.fujitsu.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wireguard: device: reset peer src endpoint when netns exits</title>
<updated>2021-12-08T08:03:22+00:00</updated>
<author>
<name>Jason A. Donenfeld</name>
<email>Jason@zx2c4.com</email>
</author>
<published>2021-11-29T15:39:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e3be118327a1d791d04fcc29742912c2fd3bdbf7'/>
<id>e3be118327a1d791d04fcc29742912c2fd3bdbf7</id>
<content type='text'>
commit 20ae1d6aa159eb91a9bf09ff92ccaa94dbea92c2 upstream.

Each peer's endpoint contains a dst_cache entry that takes a reference
to another netdev. When the containing namespace exits, we take down the
socket and prevent future sockets from being created (by setting
creating_net to NULL), which removes that potential reference on the
netns. However, it doesn't release references to the netns that a netdev
cached in dst_cache might be taking, so the netns still might fail to
exit. Since the socket is gimped anyway, we can simply clear all the
dst_caches (by way of clearing the endpoint src), which will release all
references.

However, the current dst_cache_reset function only releases those
references lazily. But it turns out that all of our usages of
wg_socket_clear_peer_endpoint_src are called from contexts that are not
exactly high-speed or bottle-necked. For example, when there's
connection difficulty, or when userspace is reconfiguring the interface.
And in particular for this patch, when the netns is exiting. So for
those cases, it makes more sense to call dst_release immediately. For
that, we add a small helper function to dst_cache.

This patch also adds a test to netns.sh from Hangbin Liu to ensure this
doesn't regress.

Tested-by: Hangbin Liu &lt;liuhangbin@gmail.com&gt;
Reported-by: Xiumei Mu &lt;xmu@redhat.com&gt;
Cc: Toke Høiland-Jørgensen &lt;toke@redhat.com&gt;
Cc: Paolo Abeni &lt;pabeni@redhat.com&gt;
Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references")
Signed-off-by: Jason A. Donenfeld &lt;Jason@zx2c4.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 20ae1d6aa159eb91a9bf09ff92ccaa94dbea92c2 upstream.

Each peer's endpoint contains a dst_cache entry that takes a reference
to another netdev. When the containing namespace exits, we take down the
socket and prevent future sockets from being created (by setting
creating_net to NULL), which removes that potential reference on the
netns. However, it doesn't release references to the netns that a netdev
cached in dst_cache might be taking, so the netns still might fail to
exit. Since the socket is gimped anyway, we can simply clear all the
dst_caches (by way of clearing the endpoint src), which will release all
references.

However, the current dst_cache_reset function only releases those
references lazily. But it turns out that all of our usages of
wg_socket_clear_peer_endpoint_src are called from contexts that are not
exactly high-speed or bottle-necked. For example, when there's
connection difficulty, or when userspace is reconfiguring the interface.
And in particular for this patch, when the netns is exiting. So for
those cases, it makes more sense to call dst_release immediately. For
that, we add a small helper function to dst_cache.

This patch also adds a test to netns.sh from Hangbin Liu to ensure this
doesn't regress.

Tested-by: Hangbin Liu &lt;liuhangbin@gmail.com&gt;
Reported-by: Xiumei Mu &lt;xmu@redhat.com&gt;
Cc: Toke Høiland-Jørgensen &lt;toke@redhat.com&gt;
Cc: Paolo Abeni &lt;pabeni@redhat.com&gt;
Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references")
Signed-off-by: Jason A. Donenfeld &lt;Jason@zx2c4.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wireguard: selftests: rename DEBUG_PI_LIST to DEBUG_PLIST</title>
<updated>2021-12-08T08:03:22+00:00</updated>
<author>
<name>Li Zhijian</name>
<email>lizhijian@cn.fujitsu.com</email>
</author>
<published>2021-11-29T15:39:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f7b6672fab701765bbfe56d5ee3f1923791cdc45'/>
<id>f7b6672fab701765bbfe56d5ee3f1923791cdc45</id>
<content type='text'>
commit 7e938beb8321d34f040557b8915b228af125f73c upstream.

DEBUG_PI_LIST was renamed to DEBUG_PLIST since 8e18faeac3 ("lib/plist:
rename DEBUG_PI_LIST to DEBUG_PLIST").

Signed-off-by: Li Zhijian &lt;lizhijian@cn.fujitsu.com&gt;
Fixes: 8e18faeac3e4 ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST")
Signed-off-by: Jason A. Donenfeld &lt;Jason@zx2c4.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7e938beb8321d34f040557b8915b228af125f73c upstream.

DEBUG_PI_LIST was renamed to DEBUG_PLIST since 8e18faeac3 ("lib/plist:
rename DEBUG_PI_LIST to DEBUG_PLIST").

Signed-off-by: Li Zhijian &lt;lizhijian@cn.fujitsu.com&gt;
Fixes: 8e18faeac3e4 ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST")
Signed-off-by: Jason A. Donenfeld &lt;Jason@zx2c4.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>wireguard: selftests: actually test for routing loops</title>
<updated>2021-12-08T08:03:22+00:00</updated>
<author>
<name>Jason A. Donenfeld</name>
<email>Jason@zx2c4.com</email>
</author>
<published>2021-11-29T15:39:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0584bf51c31583352648e78b032f1261084e46dd'/>
<id>0584bf51c31583352648e78b032f1261084e46dd</id>
<content type='text'>
commit 782c72af567fc2ef09bd7615d0307f24de72c7e0 upstream.

We previously removed the restriction on looping to self, and then added
a test to make sure the kernel didn't blow up during a routing loop. The
kernel didn't blow up, thankfully, but on certain architectures where
skb fragmentation is easier, such as ppc64, the skbs weren't actually
being discarded after a few rounds through. But the test wasn't catching
this. So actually test explicitly for massive increases in tx to see if
we have a routing loop. Note that the actual loop problem will need to
be addressed in a different commit.

Fixes: b673e24aad36 ("wireguard: socket: remove errant restriction on looping to self")
Signed-off-by: Jason A. Donenfeld &lt;Jason@zx2c4.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 782c72af567fc2ef09bd7615d0307f24de72c7e0 upstream.

We previously removed the restriction on looping to self, and then added
a test to make sure the kernel didn't blow up during a routing loop. The
kernel didn't blow up, thankfully, but on certain architectures where
skb fragmentation is easier, such as ppc64, the skbs weren't actually
being discarded after a few rounds through. But the test wasn't catching
this. So actually test explicitly for massive increases in tx to see if
we have a routing loop. Note that the actual loop problem will need to
be addressed in a different commit.

Fixes: b673e24aad36 ("wireguard: socket: remove errant restriction on looping to self")
Signed-off-by: Jason A. Donenfeld &lt;Jason@zx2c4.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
