commit 211929fd3f7c8de4d541b1cc243b82830e5ea1e8 upstream.

Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") added
khdr target to run headers_install target from the main Makefile. The
logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize
variables and include files to run headers_install from the top level
Makefile. There are a few problems with this logic.

1. Exposes top_srcdir to all tests
2. Common logic impacts all tests
3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests
   add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in
   some cases, and STATIC_LIBS in other cases. This makes this framework
   confusing to use.

The common logic that runs for all tests even when KSFT_KHDR_INSTALL
isn't defined by the test. top_srcdir is initialized to a default value
when test doesn't initialize it. It works for all tests without a sub-dir
structure and tests with sub-dir structure fail to build.

e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf

../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make: *** No rule to make target '../../../../scripts/subarch.include'.  Stop.

There is no reason to require all tests to define top_srcdir and there is
no need to require tests to add khdr dependency using adhoc changes to
TEST_* and other variables.

Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests
that have the dependency on headers_install.

Change common logic to include khdr target define and "all" target with
dependency on khdr when KSFT_KHDR_INSTALL is defined.

Only tests that have dependency on headers_install have to define just
the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to
specify khdr dependency in the test Makefiles.

Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a95c90f1e2c253b280385ecf3d4ebfe476926b28 upstream.

The last step before devm_memremap_pages() returns success is to allocate
a release action, devm_memremap_pages_release(), to tear the entire setup
down.  However, the result from devm_add_action() is not checked.

Checking the error from devm_add_action() is not enough.  The api
currently relies on the fact that the percpu_ref it is using is killed by
the time the devm_memremap_pages_release() is run.  Rather than continue
this awkward situation, offload the responsibility of killing the
percpu_ref to devm_memremap_pages_release() directly.  This allows
devm_memremap_pages() to do the right thing relative to init failures and
shutdown.

Without this change we could fail to register the teardown of
devm_memremap_pages().  The likelihood of hitting this failure is tiny as
small memory allocations almost always succeed.  However, the impact of
the failure is large given any future reconfiguration, or disable/enable,
of an nvdimm namespace will fail forever as subsequent calls to
devm_memremap_pages() will fail to setup the pgmap_radix since there will
be stale entries for the physical address range.

An argument could be made to require that the ->kill() operation be set in
the @pgmap arg rather than passed in separately.  However, it helps code
readability, tracking the lifetime of a given instance, to be able to grep
the kill routine directly at the devm_memremap_pages() call site.

Link: http://lkml.kernel.org/r/154275558526.76910.7535251937849268605.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fixes: e8d513483300 ("memremap: change devm_memremap_pages interface...")
Reviewed-by: "Jérôme Glisse" <jglisse@redhat.com>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 808153e1187fa77ac7d7dad261ff476888dcf398 upstream.

devm_memremap_pages() is a facility that can create struct page entries
for any arbitrary range and give drivers the ability to subvert core
aspects of page management.

Specifically the facility is tightly integrated with the kernel's memory
hotplug functionality.  It injects an altmap argument deep into the
architecture specific vmemmap implementation to allow allocating from
specific reserved pages, and it has Linux specific assumptions about page
structure reference counting relative to get_user_pages() and
get_user_pages_fast().  It was an oversight and a mistake that this was
not marked EXPORT_SYMBOL_GPL from the outset.

Again, devm_memremap_pagex() exposes and relies upon core kernel internal
assumptions and will continue to evolve along with 'struct page', memory
hotplug, and support for new memory types / topologies.  Only an in-kernel
GPL-only driver is expected to keep up with this ongoing evolution.  This
interface, and functionality derived from this interface, is not suitable
for kernel-external drivers.

Link: http://lkml.kernel.org/r/154275557457.76910.16923571232582744134.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull networking fixes from David Miller:

 1) Off by one in netlink parsing of mac802154_hwsim, from Alexander
    Aring.

 2) nf_tables RCU usage fix from Taehee Yoo.

 3) Flow dissector needs nhoff and thoff clamping, from Stanislav
    Fomichev.

 4) Missing sin6_flowinfo initialization in SCTP, from Xin Long.

 5) Spectrev1 in ipmr and ip6mr, from Gustavo A. R. Silva.

 6) Fix r8169 crash when DEBUG_SHIRQ is enabled, from Heiner Kallweit.

 7) Fix SKB leak in rtlwifi, from Larry Finger.

 8) Fix state pruning in bpf verifier, from Jakub Kicinski.

 9) Don't handle completely duplicate fragments as overlapping, from
    Michal Kubecek.

10) Fix memory corruption with macb and 64-bit DMA, from Anssi Hannula.

11) Fix TCP fallback socket release in smc, from Myungho Jung.

12) gro_cells_destroy needs to napi_disable, from Lorenzo Bianconi.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (130 commits)
  rds: Fix warning.
  neighbor: NTF_PROXY is a valid ndm_flag for a dump request
  net: mvpp2: fix the phylink mode validation
  net/sched: cls_flower: Remove old entries from rhashtable
  net/tls: allocate tls context using GFP_ATOMIC
  iptunnel: make TUNNEL_FLAGS available in uapi
  gro_cell: add napi_disable in gro_cells_destroy
  lan743x: Remove MAC Reset from initialization
  net/mlx5e: Remove the false indication of software timestamping support
  net/mlx5: Typo fix in del_sw_hw_rule
  net/mlx5e: RX, Fix wrong early return in receive queue poll
  ipv6: explicitly initialize udp6_addr in udp_sock_create6()
  bnxt_en: Fix ethtool self-test loopback.
  net/rds: remove user triggered WARN_ON in rds_sendmsg
  net/rds: fix warn in rds_message_alloc_sgs
  ath10k: skip sending quiet mode cmd for WCN3990
  mac80211: free skb fraglist before freeing the skb
  nl80211: fix memory leak if validate_pae_over_nl80211() fails
  net/smc: fix TCP fallback socket release
  vxge: ensure data0 is initialized in when fetching firmware version information
  ...

Add a test to exercise the fix from the previous patch.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2018-12-15

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) fix liveness propagation of callee saved registers, from Jakub.

2) fix overflow in bpf_jit_limit knob, from Daniel.

3) bpf_flow_dissector api fix, from Stanislav.

4) bpf_perf_event api fix on powerpc, from Sandipan.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Pull XArray fixes from Matthew Wilcox:
 "Two bugfixes, each with test-suite updates, two improvements to the
  test-suite without associated bugs, and one patch adding a missing
  API"

* tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax:
  XArray: Fix xa_alloc when id exceeds max
  XArray tests: Check iterating over multiorder entries
  XArray tests: Handle larger indices more elegantly
  XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh
  radix tree: Don't return retry entries from lookup

Pull Kselftest fix from Shuah Khan:
 "A single fix for a seccomp test from Kees Cook."

* tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/seccomp: Remove SIGSTOP si_pid check

Currently for liveness and state pruning the register parentage
chains don't include states of the callee.  This makes some sense
as the callee can't access those registers.  However, this means
that READs done after the callee returns will not propagate into
the states of the callee.  Callee will then perform pruning
disregarding differences in caller state.

Example:

   0: (85) call bpf_user_rnd_u32
   1: (b7) r8 = 0
   2: (55) if r0 != 0x0 goto pc+1
   3: (b7) r8 = 1
   4: (bf) r1 = r8
   5: (85) call pc+4
   6: (15) if r8 == 0x1 goto pc+1
   7: (05) *(u64 *)(r9 - 8) = r3
   8: (b7) r0 = 0
   9: (95) exit

   10: (15) if r1 == 0x0 goto pc+0
   11: (95) exit

Here we acquire unknown state with call to get_random() [1].  Then
we store this random state in r8 (either 0 or 1) [1 - 3], and make
a call on line 5.  Callee does nothing but a trivial conditional
jump (to create a pruning point).  Upon return caller checks the
state of r8 and either performs an unsafe read or not.

Verifier will first explore the path with r8 == 1, creating a pruning
point at [11].  The parentage chain for r8 will include only callers
states so once verifier reaches [6] it will mark liveness only on states
in the caller, and not [11].  Now when verifier walks the paths with
r8 == 0 it will reach [11] and since REG_LIVE_READ on r8 was not
propagated there it will prune the walk entirely (stop walking
the entire program, not just the callee).  Since [6] was never walked
with r8 == 0, [7] will be considered dead and replaced with "goto -1"
causing hang at runtime.

This patch weaves the callee's explored states onto the callers
parentage chain.  Rough parentage for r8 would have looked like this
before:

[0] [1] [2] [3] [4] [5]   [10]      [11]      [6]      [7]
     |           |      ,---|----.    |        |        |
  sl0:         sl0:    / sl0:     \ sl0:      sl0:     sl0:
  fr0: r8 <-- fr0: r8<+--fr0: r8   `fr0: r8  ,fr0: r8<-fr0: r8
                       \ fr1: r8 <- fr1: r8 /
                        \__________________/

after:

[0] [1] [2] [3] [4] [5]   [10]      [11]      [6]      [7]
     |           |          |         |        |        |
   sl0:         sl0:      sl0:       sl0:      sl0:     sl0:
   fr0: r8 <-- fr0: r8 <- fr0: r8 <- fr0: r8 <-fr0: r8<-fr0: r8
                          fr1: r8 <- fr1: r8

Now the mark from instruction 6 will travel through callees states.

Note that we don't have to connect r0 because its overwritten by
callees state on return and r1 - r5 because those are not alive
any more once a call is made.

v2:
 - don't connect the callees registers twice (Alexei: suggestion & code)
 - add more details to the comment (Ed & Alexei)
v1: don't unnecessarily link caller saved regs (Jiong)

Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Commit f149b3155744 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP")
means that the seccomp selftest cannot check si_pid under SIGSTOP anymore.
Since it's believed[1] there are no other userspace things depending on the
old behavior, this removes the behavioral check in the selftest, since it's
more a "extra" sanity check (which turns out, maybe, not to have been
useful to test).

[1] https://lkml.kernel.org/r/CAGXu5jJaZAOzP1qFz66tYrtbuywqb+UN2SOA1VLHpCCOiYvYeg@mail.gmail.com

Reported-by: Tycho Andersen <tycho@tycho.ws>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>