linux-stable.git/tools/testing, branch linux-4.4.y

selftests/powerpc: Fix "no_handler" EBB selftest

2021-07-20T14:22:41+00:00

[ Upstream commit 45677c9aebe926192e59475b35a1ff35ff2d4217 ]

The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.

Reported-by: Shirisha Ganta 
Signed-off-by: Athira Rajeev 
Tested-by: Nageswara R Sastry >
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin

selftests: Set CC to clang in lib.mk if LLVM is set

2021-05-22T08:38:27+00:00

[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ]

selftests/bpf/Makefile includes lib.mk. With the following command
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.

Signed-off-by: Yonghong Song 
Signed-off-by: Alexei Starovoitov 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
Signed-off-by: Sasha Levin

selftests/powerpc: Purge extra count_pmc() calls of ebb selftests

2020-09-03T09:19:24+00:00

[ Upstream commit 3337bf41e0dd70b4064cdf60acdfcdc2d050066c ]

An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.

Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):

==========
   ...
   [21]: counter = 8
   [22]: register SPRN_MMCR0 = 0x0000000080000080
   [23]: register SPRN_PMC1  = 0x0000000080000004
   [24]: counter = 9
   [25]: register SPRN_MMCR0 = 0x0000000080000080
   [26]: register SPRN_PMC1  = 0x0000000080000004
   [27]: counter = 10
   [28]: register SPRN_MMCR0 = 0x0000000080000080
   [29]: register SPRN_PMC1  = 0x0000000080000004
>> [30]: register SPRN_PMC1  = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========

Signed-off-by: Desnes A. Nunes do Rosario 
Tested-by: Sachin Sant 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
Signed-off-by: Sasha Levin

selftests/net: in timestamping, strncpy needs to preserve null byte

2020-06-30T00:07:54+00:00

[ Upstream commit 8027bc0307ce59759b90679fa5d8b22949586d20 ]

If user passed an interface option longer than 15 characters, then
device.ifr_name and hwtstamp.ifr_name became non-null-terminated
strings. The compiler warned about this:

timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \
destination size [-Wstringop-truncation]
  353 |  strncpy(device.ifr_name, interface, sizeof(device.ifr_name));

Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Tanner Love 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

selftests/ipc: Fix test failure seen after initial test run

2020-05-10T08:26:10+00:00

[ Upstream commit b87080eab4c1377706c113fc9c0157f19ea8fed1 ]

After successfully running the IPC msgque test once, subsequent runs
result in a test failure:

  $ sudo ./run_kselftest.sh
  TAP version 13
  1..1
  # selftests: ipc: msgque
  # Failed to get stats for IPC queue with id 0
  # Failed to dump queue: -22
  # Bail out!
  # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
  not ok 1 selftests: ipc: msgque # exit=1

The dump_queue() function loops through the possible message queue index
values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id
represents the index value. The first time the test is ran, the initial
index value of 0 is valid and the test is able to complete. The index
value of 0 is not valid in subsequent test runs and the loop attempts to
try index values of 1, 2, 3, and so on until a valid index value is
found that corresponds to the message queue created earlier in the test.

The msgctl() syscall returns -1 and sets errno to EINVAL when invalid
index values are used. The test failure is caused by incorrectly
comparing errno to -EINVAL when cycling through possible index values.

Fix invalid test failures on subsequent runs of the msgque test by
correctly comparing errno values to a non-negated EINVAL.

Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test")
Signed-off-by: Tyler Hicks 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault

2020-04-24T05:57:06+00:00

[ Upstream commit 630b99ab60aa972052a4202a1ff96c7e45eb0054 ]

If AT_SYSINFO is not present, don't try to call a NULL pointer.

Reported-by: kbuild test robot 
Signed-off-by: Andy Lutomirski 
Signed-off-by: Borislav Petkov 
Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.org
Signed-off-by: Sasha Levin

rseq/selftests: Turn off timeout setting

2020-01-23T07:18:38+00:00

[ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ]

As the rseq selftests can run for a long period of time, disable the
timeout that the general selftests have.

Signed-off-by: Mathieu Desnoyers 
Cc: Shuah Khan 
Cc: Thomas Gleixner 
Cc: Peter Zijlstra (Intel) 
Cc: "Paul E. McKenney" 
Cc: Boqun Feng 
Cc: "H . Peter Anvin" 
Cc: Paul Turner 
Cc: Dmitry Vyukov 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftests/ftrace: Fix to test kprobe $comm arg only if available

2019-11-28T17:25:51+00:00

[ Upstream commit 2452c96e617a0ff6fb2692e55217a3fa57a7322c ]

Test $comm in kprobe-event argument syntax testcase
only if it is supported on the kernel because
$comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.

Signed-off-by: Masami Hiramatsu 
Signed-off-by: Shuah Khan (Samsung OSG) 
Signed-off-by: Sasha Levin

selftests: kvm: Adding config fragments

2019-09-06T08:18:09+00:00

[ Upstream commit c096397c78f766db972f923433031f2dec01cae0 ]

selftests kvm test cases need pre-required kernel configs for the test
to get pass.

Signed-off-by: Naresh Kamboju 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Sasha Levin

selftests/net: correct the return value for run_netsocktests

2019-05-16T17:45:06+00:00

[ Upstream commit 30c04d796b693e22405c38e9b78e9a364e4c77e6 ]

The run_netsocktests will be marked as passed regardless the actual test
result from the ./socket:

    selftests: net: run_netsocktests
    ========================================
    --------------------
    running socket test
    --------------------
    [FAIL]
    ok 1..6 selftests: net: run_netsocktests [PASS]

This is because the test script itself has been successfully executed.
Fix this by exit 1 when the test failed.

Signed-off-by: Po-Hsu Lin 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin