linux-stable.git/tools/testing/selftests/timers, branch linux-4.9.y

selftests/timers: Add missing fflush(stdout) calls

2019-06-22T06:17:20+00:00

[ Upstream commit fe48319243a626c860fd666ca032daacc2ba84a5 ]

When running under a pipe, some timer tests would not report output in
real-time because stdout flushes were missing after printf()s that lacked
a newline. This adds them to restore real-time status output that humans
can enjoy.

Signed-off-by: Kees Cook 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock adjustments are in progress

2018-09-26T06:36:39+00:00

[ Upstream commit 1416270f4a1ae83ea84156ceba19a66a8f88be1f ]

In the past we've warned when ADJ_OFFSET was in progress, usually
caused by ntpd or some other time adjusting daemon running in non
steady sate, which can cause the skew calculations to be
incorrect.

Thus, this patch checks to see if the clock was being adjusted
when we fail so that we don't cause false negatives.

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Miroslav Lichvar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Cc: Stephen Boyd 
Cc: Shuah Khan 
Cc: linux-kselftest@vger.kernel.org
Suggested-by: Miroslav Lichvar 
Signed-off-by: John Stultz 
Signed-off-by: Greg Kroah-Hartman

selftests/timers: Add missing error code assignment before test

2016-09-20T15:00:28+00:00

In order to work, the 'err' return value has to be updated otherwise the
test can never be true.

Signed-off-by: Christophe JAILLET 
Acked-by: John Stultz 
Signed-off-by: Shuah Khan

Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2016-08-05T13:48:22+00:00

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...

rtc: rtctest: Change no IRQ detection for RTC_IRQP_SET

2016-06-26T21:43:54+00:00

A call to ioctl(..., RTC_IRQP_SET, ...) should never result in
ENOTTY. All new style RTC drivers implement it and all of the old style
drivers return EINVAL when they don't support periodic IRQs.

Signed-off-by: Andrey Smirnov 
Signed-off-by: Alexandre Belloni

rtc: rtctest: Change no IRQ detection for RTC_IRQP_READ

2016-06-26T21:43:49+00:00

A call to ioctl(..., RTC_IRQP_READ, ...) should never result in
ENOTTY. All new style RTC drivers implement it and all of the old style
drivers return EINVAL when they don't support periodic IRQs.

Signed-off-by: Andrey Smirnov 
Signed-off-by: Alexandre Belloni

rtc: rtctest: Change alarm IRQ support detection

2016-06-26T21:43:44+00:00

For old style drivers, call a call to ioctl(..., RTC_ALM_SET, ...):

    - char/ds1302.c will always return -EINVAL
    - char/genrtc.c: will always return -EINVAL
    - char/rtc.c will succeed regardless if IRQs are supported or not
    - char/efirtc.c will always return -EINVAL
    - input/misc/hp_sdc_rtc.c ... that ioctl code is a good lesson about
      ifdefing code out and punting implementation ... and it will
      always return -EINVAL

For new style rtc drivers, a call to ioctl(..., RTC_ALM_SET, ...) never
results in a call to __rtc_set_alarm, since struct rtc_wkalarm passed to
rtc_set_alarm has 'enabled' field set to 0. This means that
rtc->ops->set_alarm driver hook is never called in that ioctl. Since no
driver code interaction happens as a part of that call, using its
results to ascertain properties of the driver is not going to work. To
remedy this - use the result of RTC_AIE_ON to make the judgement.

This patch also changes ENOTTY to EINVAL as an error code value that
would tell us that IRQs are not supported. There are three reason for
this:

 - As mentioned above old style driver never returns ENOTTY for this
   ioctl

 - In it's code __rtc_set_alarm() returns -EINVAL if rtc->ops->set_alarm
   method is not provided by the driver, so one reason for change is to
   be consistent with that code path.

 - A call to ioctl(..., RTC_UIE_ON, ...) will result in a call to
   rtc_update_irq_enable() and then __rtc_set_alarm(), which, if IRQs
   are not supported by the driver, will result in a non-zero error
   code. Returning ENOTTY in that case would:

   	 a) Not be consistent with other codepaths of
   	 rtc_update_irq_enable, for example the check of
   	 rtc->uie_unsupported

	 b) Would break update IRQ emulation code since that codpath
	 expects EINVAL

	 c) Would break test's logic for feature support detection in
	 the case of RTC_UIE_ON ioctl

Signed-off-by: Andrey Smirnov 
Signed-off-by: Alexandre Belloni

kselftests: timers: Add set-tz test case

2016-06-02T22:39:56+00:00

Mika Westerberg reported a erroneous change in the error
checking of settimeofday, so I wanted to add a test to ensure
we don't trip over this again.

Cc: Mika Westerberg 
Cc: Baolin Wang 
Cc: Thomas Gleixner 
Cc: Shuah Khan 
Cc: Arnd Bergmann 
Cc: Ingo Molnar 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Signed-off-by: John Stultz 
Signed-off-by: Shuah Khan

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2016-03-18T04:38:27+00:00

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  drivers/rtc: broken link fix
  drm/i915 Fix typos in i915_gem_fence.c
  Docs: fix missing word in REPORTING-BUGS
  lib+mm: fix few spelling mistakes
  MAINTAINERS: add git URL for APM driver
  treewide: Fix typo in printk

treewide: Fix typo in printk

2016-02-15T10:18:22+00:00

This patch fix spelling typos found in printk and Kconfig.

Signed-off-by: Masanari Iida 
Acked-by: Randy Dunlap 
Signed-off-by: Jiri Kosina