[ Upstream commit ca3676f94b8f40f52d285f9aef36dfd6725bfc14 ]

When generating the selftests to another folder, the icmp.sh test will
miss as it is not in Makefile, e.g.

  make -C tools/testing/selftests/ install \
      TARGETS="net" INSTALL_PATH=/tmp/kselftests

Fixes: 7e9838b7915e ("selftests/net: Add icmp.sh for testing ICMP dummy address responses")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Make sure that SO_NETNS_COOKIE returns a non-zero value, and
that sockets from different namespaces have a distinct cookie
value.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We found that with the latest mainline kernel (5.12.0-051200rc8) on
some KVM instances / bare-metal systems, the following tests will take
longer than the kselftest framework default timeout (45 seconds) to
run and thus got terminated with TIMEOUT error:
* xfrm_policy.sh - took about 2m20s
* pmtu.sh - took about 3m5s
* udpgso_bench.sh - took about 60s

Bump the timeout setting to 5 minutes to allow them have a chance to
finish.

https://bugs.launchpad.net/bugs/1856010
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add some basic veth tests, that verify the expected flags and
aggregation with different setups (default, xdp, etc...)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a bunch of virtual topologies and verify that
NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD-enabled
devices aggregate the ingress packets as expected.
Additionally check that the aggregate packets are
segmented correctly when landing on a socket

Also test SKB_GSO_FRAGLIST and SKB_GSO_UDP_L4 aggregation
on top of UDP tunnel (vxlan)

v1 -> v2:
 - hopefully clarify the commit message
 - moved the overlay network ipv6 range into the 'documentation'
   reserved range (Willem)

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add selftests for kernel behavior with regard to various classes of
unallocated/reserved IPv4 addresses, checking whether or not these
addresses can be assigned as unicast addresses on links and used in
routing.

Expect the current kernel behavior at the time of this patch. That is:

* 0/8 and 240/4 may be used as unicast, with the exceptions of 0.0.0.0
  and 255.255.255.255;
* the lowest address in a subnet may only be used as a broadcast address;
* 127/8 may not be used as unicast (the route_localnet option, which is
  disabled by default, still leaves it treated slightly specially);
* 224/4 may not be used as unicast.

Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210126040834.GR24989@frotz.zork.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Test different encapsulation modes of the bareudp module:
  * Unicast MPLS,
  * IPv4 only,
  * IPv4 in multiproto mode (that is, IPv4 and IPv6),
  * IPv6.

Each mode is tested with both an IPv4 and an IPv6 underlay.

v2:
  * Add build dependencies in config file (Willem de Bruijn).
  * The MPLS test now uses its own IP addresses. This minimises
    the amount of cleanup between tests and simplifies the script.
  * Verify that iproute2 supports bareudp tunnels before running the
    script (and other minor usability improvements).

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/8abc0e58f8a7eeb404f82466505a73110bc43ab8.1604088587.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.

In both cases code was added on both sides in the same place
so just keep both.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The objective of the tests is to check that ICMP errors generated while
crossing between VRFs are properly routed back to the source host.

The first ttl test sends a ping with a ttl of 1 from h1 to h2 and parses the
output of the command to check that a ttl expired error is received.

The second ttl test runs traceroute from h1 to h2 and parses the output to
check for a hop on r1.

The mtu test sends a ping with a payload of 1450 from h1 to h2, through
r1 which has an interface with a mtu of 1400 and parses the output of the
command to check that a fragmentation needed error is received.

[ The IPv6 MTU test still fails with the symmetric routing setup. It
  appears to be caused by source address selection picking ::1.  Fixing
  this is beyond the scope of this series. ]

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2020-10-02

1) Add a full xfrm compatible layer for 32-bit applications on
   64-bit kernels. From Dmitry Safonov.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>