linux-stable.git/tools/testing/selftests/kvm, branch v5.15

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2021-10-01T18:08:07+00:00

Pull more kvm fixes from Paolo Bonzini:
 "Small x86 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Ensure all migrations are performed when test is affined
  KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
  ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
  x86/kvmclock: Move this_cpu_pvti into kvmclock.h
  selftests: KVM: Don't clobber XMM register when read
  KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue

KVM: selftests: Ensure all migrations are performed when test is affined

2021-09-30T08:25:57+00:00

Rework the CPU selection in the migration worker to ensure the specified
number of migrations are performed when the test iteslf is affined to a
subset of CPUs.  The existing logic skips iterations if the target CPU is
not in the original set of possible CPUs, which causes the test to fail
if too many iterations are skipped.

  ==== Test Assertion Failure ====
  rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2)
  pid=10127 tid=10127 errno=4 - Interrupted system call
     1  0x00000000004018e5: main at rseq_test.c:227
     2  0x00007fcc8fc66bf6: ?? ??:0
     3  0x0000000000401959: _start at ??:?
  Only performed 4 KVM_RUNs, task stalled too much?

Calculate the min/max possible CPUs as a cheap "best effort" to avoid
high runtimes when the test is affined to a small percentage of CPUs.
Alternatively, a list or xarray of the possible CPUs could be used, but
even in a horrendously inefficient setup, such optimizations are not
needed because the runtime is completely dominated by the cost of
migrating the task, and the absolute runtime is well under a minute in
even truly absurd setups, e.g. running on a subset of vCPUs in a VM that
is heavily overcommited (16 vCPUs per pCPU).

Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Reported-by: Dongli Zhang 
Signed-off-by: Sean Christopherson 
Message-Id: <20210929234112.1862848-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini

selftests: KVM: Don't clobber XMM register when read

2021-09-28T15:31:29+00:00

There is no need to clobber a register that is only being read from.
Oops. Drop the XMM register from the clobbers list.

Signed-off-by: Oliver Upton 
Message-Id: <20210927223621.50178-1-oupton@google.com>
Signed-off-by: Paolo Bonzini

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2021-09-27T20:58:23+00:00

Pull kvm fixes from Paolo Bonzini:
 "A bit late... I got sidetracked by back-from-vacation routines and
  conferences. But most of these patches are already a few weeks old and
  things look more calm on the mailing list than what this pull request
  would suggest.

  x86:

   - missing TLB flush

   - nested virtualization fixes for SMM (secure boot on nested
     hypervisor) and other nested SVM fixes

   - syscall fuzzing fixes

   - live migration fix for AMD SEV

   - mirror VMs now work for SEV-ES too

   - fixes for reset

   - possible out-of-bounds access in IOAPIC emulation

   - fix enlightened VMCS on Windows 2022

  ARM:

   - Add missing FORCE target when building the EL2 object

   - Fix a PMU probe regression on some platforms

  Generic:

   - KCSAN fixes

  selftests:

   - random fixes, mostly for clang compilation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
  selftests: KVM: Explicitly use movq to read xmm registers
  selftests: KVM: Call ucall_init when setting up in rseq_test
  KVM: Remove tlbs_dirty
  KVM: X86: Synchronize the shadow pagetable before link it
  KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
  KVM: x86: nSVM: don't copy virt_ext from vmcb12
  KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
  KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
  KVM: x86: nSVM: restore int_vector in svm_clear_vintr
  kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
  KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
  KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
  KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state
  KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm
  KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode
  KVM: x86: reset pdptrs_from_userspace when exiting smm
  KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit
  KVM: nVMX: Filter out all unsupported controls when eVMCS was activated
  KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
  KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
  ...

Merge tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2021-09-25T22:30:29+00:00

Pull Kselftest fixes from Shuah Khan:

 - fix to Kselftest common framework header install to run before other
   targets for it work correctly in parallel build case.

 - fixes to kvm test to not ignore fscanf() returns which could result
   in inconsistent test behavior and failures.

* tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: kvm: fix get_run_delay() ignoring fscanf() return warn
  selftests: kvm: move get_run_delay() into lib/test_util
  selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn
  selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn
  selftests: be sure to make khdr before other targets

selftests: KVM: Explicitly use movq to read xmm registers

2021-09-24T06:32:58+00:00

Compiling the KVM selftests with clang emits the following warning:

>> include/x86_64/processor.h:297:25: error: variable 'xmm0' is uninitialized when used here [-Werror,-Wuninitialized]
>>                return (unsigned long)xmm0;

where xmm0 is accessed via an uninitialized register variable.

Indeed, this is a misuse of register variables, which really should only
be used for specifying register constraints on variables passed to
inline assembly. Rather than attempting to read xmm registers via
register variables, just explicitly perform the movq from the desired
xmm register.

Fixes: 783e9e51266e ("kvm: selftests: add API testing infrastructure")
Signed-off-by: Oliver Upton 
Message-Id: <20210924005147.1122357-1-oupton@google.com>
Reviewed-by: Ricardo Koller 
Signed-off-by: Paolo Bonzini

selftests: KVM: Call ucall_init when setting up in rseq_test

2021-09-24T06:32:12+00:00

While x86 does not require any additional setup to use the ucall
infrastructure, arm64 needs to set up the MMIO address used to signal a
ucall to userspace. rseq_test does not initialize the MMIO address,
resulting in the test spinning indefinitely.

Fix the issue by calling ucall_init() during setup.

Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Signed-off-by: Oliver Upton 
Message-Id: <20210923220033.4172362-1-oupton@google.com>
Signed-off-by: Paolo Bonzini

KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0

2021-09-23T14:05:07+00:00

Test that if:

* L1 disables virtual interrupt masking, and INTR intercept.

* L1 setups a virtual interrupt to be injected to L2 and enters L2 with
  interrupts disabled, thus the virtual interrupt is pending.

* Now an external interrupt arrives in L1 and since
  L1 doesn't intercept it, it should be delivered to L2 when
  it enables interrupts.

  to do this L0 (abuses) V_IRQ to setup an
  interrupt window, and returns to L2.

* L2 enables interrupts.
  This should trigger the interrupt window,
  injection of the external interrupt and delivery
  of the virtual interrupt that can now be done.

* Test that now L2 gets those interrupts.

This is the test that demonstrates the issue that was
fixed in the previous patch.

Signed-off-by: Maxim Levitsky 
Message-Id: <20210914154825.104886-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini

KVM: selftests: Create a separate dirty bitmap per slot

2021-09-22T14:33:14+00:00

The calculation to get the per-slot dirty bitmap was incorrect leading
to a buffer overrun. Fix it by splitting out the dirty bitmap into a
separate bitmap per slot.

Fixes: 609e6202ea5f ("KVM: selftests: Support multiple slots in dirty_log_perf_test")
Signed-off-by: David Matlack 
Reviewed-by: Andrew Jones 
Message-Id: <20210917173657.44011-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini

KVM: selftests: Refactor help message for -s backing_src

2021-09-22T14:33:14+00:00

All selftests that support the backing_src option were printing their
own description of the flag and then calling backing_src_help() to dump
the list of available backing sources. Consolidate the flag printing in
backing_src_help() to align indentation, reduce duplicated strings, and
improve consistency across tests.

Note: Passing "-s" to backing_src_help is unnecessary since every test
uses the same flag. However I decided to keep it for code readability
at the call sites.

While here this opportunistically fixes the incorrectly interleaved
printing -x help message and list of backing source types in
dirty_log_perf_test.

Fixes: 609e6202ea5f ("KVM: selftests: Support multiple slots in dirty_log_perf_test")
Reviewed-by: Ben Gardon 
Reviewed-by: Andrew Jones 
Signed-off-by: David Matlack 
Message-Id: <20210917173657.44011-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini