linux-stable.git/tools/testing/selftests/drivers, branch v6.10

selftests: virtio_net: add forgotten config options

2024-06-20T14:10:32+00:00

One may use tools/testing/selftests/drivers/net/virtio_net/config
for example for vng build command like this one:
$ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config

In that case, the needed kernel config options are not turned on.
Add the missed kernel config options.

Reported-by: Jakub Kicinski 
Closes: https://lore.kernel.org/netdev/20240617072614.75fe79e7@kernel.org/
Reported-by: Matthieu Baerts 
Closes: https://lore.kernel.org/netdev/1a63f209-b1d4-4809-bc30-295a5cafa296@kernel.org/
Fixes: ccfaed04db5e ("selftests: virtio_net: add initial tests")
Signed-off-by: Jiri Pirko 
Reviewed-by: Xuan Zhuo 
Acked-by: Michael S. Tsirkin 
Link: https://lore.kernel.org/r/20240619061748.1869404-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski

testing: net-drv: use stats64 for testing

2024-05-23T08:18:29+00:00

Testing a network device that has large numbers of bytes/packets may
overflow. Using stats64 when comparing fixes this problem.

I tripped on this while iterating on a qstats patch for mlx5. See below
for confirmation without my added code that this is a bug.

Before this patch (with added debugging output):

$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
rstat: 481708634 qstat: 666201639514 key: tx-bytes
not ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex

Note the huge delta above ^^^ in the rtnl vs qstats.

After this patch:

$ NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex

It looks like rtnl_fill_stats in net/core/rtnetlink.c will attempt to
copy the 64bit stats into a 32bit structure which is probably why this
behavior is occurring.

To show this is happening, you can get the underlying stats that the
stats.py test uses like this:

$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
           --do getlink --json '{"ifi-index": 7}'

And examine the output (heavily snipped to show relevant fields):

 'stats': {
           'multicast': 3739197,
           'rx-bytes': 1201525399,
           'rx-packets': 56807158,
           'tx-bytes': 492404458,
           'tx-packets': 1200285371,

 'stats64': {
             'multicast': 3739197,
             'rx-bytes': 35561263767,
             'rx-packets': 56807158,
             'tx-bytes': 666212335338,
             'tx-packets': 1200285371,

The stats.py test prior to this patch was using the 'stats' structure
above, which matches the failure output on my system.

Comparing side by side, rx-bytes and tx-bytes, and getting ethtool -S
output:

rx-bytes stats:    1201525399
rx-bytes stats64: 35561263767
rx-bytes ethtool: 36203402638

tx-bytes stats:      492404458
tx-bytes stats64: 666212335338
tx-bytes ethtool: 666215360113

Note that the above was taken from a system with an mlx5 NIC, which only
exposes ndo_get_stats64.

Based on the ethtool output and qstat output, it appears that stats.py
should be updated to use the 'stats64' structure for accurate
comparisons when packet/byte counters get very large.

To confirm that this was not related to the qstats code I was iterating
on, I booted a kernel without my driver changes and re-ran the test
which shows the qstats are skipped (as they don't exist for mlx5):

NETIF=eth0 tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..4
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum # SKIP qstats not supported by the device
ok 4 stats.qstat_by_ifindex # SKIP No ifindex supports qstats

But, fetching the stats using the CLI

$ ./cli.py --spec ../../../Documentation/netlink/specs/rt_link.yaml \
           --do getlink --json '{"ifi-index": 7}'

Shows the same issue (heavily snipped for relevant fields only):

 'stats': {
           'multicast': 105489,
           'rx-bytes': 530879526,
           'rx-packets': 751415,
           'tx-bytes': 2510191396,
           'tx-packets': 27700323,
 'stats64': {
             'multicast': 105489,
             'rx-bytes': 530879526,
             'rx-packets': 751415,
             'tx-bytes': 15395093284,
             'tx-packets': 27700323,

Comparing side by side with ethtool -S on the unmodified mlx5 driver:

tx-bytes stats:    2510191396
tx-bytes stats64: 15395093284
tx-bytes ethtool: 17718435810

Fixes: f0e6c86e4bab ("testing: net-drv: add a driver test for stats reporting")
Signed-off-by: Joe Damato 
Link: https://lore.kernel.org/r/20240520235850.190041-1-jdamato@fastly.com
Signed-off-by: Paolo Abeni

net: selftest: add test for netdev netlink queue-get API

2024-05-09T01:59:47+00:00

Add a selftest for netdev generic netlink. For now there is only a
single test that exercises the `queue-get` API.

The test works with netdevsim by default or with a real device by
setting NETIF.

Add a timeout param to cmd() since ethtool -L can take a long time on
real devices.

Signed-off-by: David Wei 
Link: https://lore.kernel.org/r/20240507163228.2066817-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski

selftests: drv-net: add checksum tests

2024-05-09T01:57:55+00:00

Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:

- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum

- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion

The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.

In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.

Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.

Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.

Tested:

        make -C tools/testing/selftests/ \
                TARGETS="drivers/net drivers/net/hw" \
                install INSTALL_PATH=/tmp/ksft
        cd /tmp/ksft

	sudo NETIF=ens4 REMOTE_TYPE=ssh \
		REMOTE_ARGS="root@10.40.0.2" \
		LOCAL_V4="10.40.0.1" \
		REMOTE_V4="10.40.0.2" \
		./run_kselftest.sh -t drivers/net/hw:csum.py

Signed-off-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20240507154216.501111-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski

selftests: microchip: add test for QoS support on KSZ9477 switch family

2024-05-08T09:35:11+00:00

Add tests covering following functionality on KSZ9477 switch family:
- default port priority
- global DSCP to Internal Priority Mapping
- apptrust configuration

This script was tested on KSZ9893R

Signed-off-by: Oleksij Rempel 
Signed-off-by: David S. Miller

selftests: drv-net-hw: add test for memory allocation failures with page pool

2024-04-30T15:15:32+00:00

Bugs in memory allocation failure paths are quite common.
Add a test exercising those paths based on qstat and page pool
failure hook.

Running on bnxt:

  # ./drivers/net/hw/pp_alloc_fail.py
  KTAP version 1
  1..1
  # ethtool -G change retval: success
  ok 1 pp_alloc_fail.test_pp_alloc
  # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0

I initially wrote this test to validate commit be43b7489a3c ("net/mlx5e:
RX, Fix page_pool allocation failure recovery for striding rq") but mlx5
still doesn't have qstat. So I run it on bnxt, and while bnxt survives
I found the problem fixed in commit 730117730709 ("eth: bnxt: fix counting
packets discarded due to OOM and netpoll").

Reviewed-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20240429144426.743476-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski

selftests: drv-net: support generating iperf3 load

2024-04-30T15:15:32+00:00

While we are not very interested in testing performance
it's useful to be able to generate a lot of traffic.
iperf is the simplest way of getting relatively high PPS.

Reviewed-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20240429144426.743476-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski

selftests: drv-net-hw: support using Python from net hw tests

2024-04-30T15:15:31+00:00

We created a separate directory for HW-only tests, recently.
Glue in the Python test library there, Python is a bit annoying
when it comes to using library code located "lower"
in the directory structure.

Reuse the Env class, but let tests require non-nsim setup.

Reviewed-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20240429144426.743476-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski

selftests: drv-net: validate the environment

2024-04-26T23:10:26+00:00

Throw a slightly more helpful exception when env variables
are partially populated. Prior to this change we'd get
a dictionary key exception somewhere later on.

Reviewed-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20240425222341.309778-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski

selftests: drv-net: reimplement the config parser

2024-04-26T23:10:26+00:00

The shell lexer is not helping much, do very basic parsing
manually.

Reviewed-by: Willem de Bruijn 
Link: https://lore.kernel.org/r/20240425222341.309778-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski