linux-stable.git/tools/testing/selftests/drivers, branch linux-5.11.y

selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test

2021-05-19T08:29:36+00:00

[ Upstream commit 1233898ab758cbcf5f6fea10b8dd16a0b2c24fab ]

The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.

However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.

To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.

Signed-off-by: Petr Machata 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

selftests: mlxsw: Increase the tolerance of backlog buildup

2021-05-19T08:29:35+00:00

[ Upstream commit dda7f4fa55839baeb72ae040aeaf9ccf89d3e416 ]

The intention behind this test is to make sure that qdisc limit is
correctly projected to the HW. However, first, due to rounding in the
qdisc, and then in the driver, the number cannot actually be accurate. And
second, the approach to testing this is to oversubscribe the port with
traffic generated on the same switch. The actual backlog size therefore
fluctuates.

In practice, this test proved to be noisier than the rest, and spuriously
fails every now and then. Increase the tolerance to 10 % to avoid these
issues.

Signed-off-by: Petr Machata 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test

2021-05-14T08:50:17+00:00

[ Upstream commit 1f1c92139e36223b89d8140f2b72f75e79baf8bd ]

Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.

Remove the if statement that separates the condition and the error code
check, so the test won't always pass.

Fixes: abfce9e062021 ("selftests: mlxsw: Reduce running time using offload indication")
Reported-by: Ido Schimmel 
Signed-off-by: Danielle Ratson 
Reviewed-by: Petr Machata 
Signed-off-by: Petr Machata 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

Merge tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-01-05T20:38:56+00:00

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from netfilter, wireless and bpf
  trees.

  Current release - regressions:

   - mt76: fix NULL pointer dereference in mt76u_status_worker and
     mt76s_process_tx_queue

   - net: ipa: fix interconnect enable bug

  Current release - always broken:

   - netfilter: fixes possible oops in mtype_resize in ipset

   - ath11k: fix number of coding issues found by static analysis tools
     and spurious error messages

  Previous releases - regressions:

   - e1000e: re-enable s0ix power saving flows for systems with the
     Intel i219-LM Ethernet controllers to fix power use regression

   - virtio_net: fix recursive call to cpus_read_lock() to avoid a
     deadlock

   - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()

   - sysfs: take the rtnl lock around XPS configuration

   - xsk: fix memory leak for failed bind and rollback reservation at
     NETDEV_TX_BUSY

   - r8169: work around power-saving bug on some chip versions

  Previous releases - always broken:

   - dcb: validate netlink message in DCB handler

   - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
     to prevent unnecessary retries

   - vhost_net: fix ubuf refcount when sendmsg fails

   - bpf: save correct stopping point in file seq iteration

   - ncsi: use real net-device for response handler

   - neighbor: fix div by zero caused by a data race (TOCTOU)

   - bareudp: fix use of incorrect min_headroom size and a false
     positive lockdep splat from the TX lock

   - mvpp2:
      - clear force link UP during port init procedure in case
        bootloader had set it
      - add TCAM entry to drop flow control pause frames
      - fix PPPoE with ipv6 packet parsing
      - fix GoP Networking Complex Control config of port 3
      - fix pkt coalescing IRQ-threshold configuration

   - xsk: fix race in SKB mode transmit with shared cq

   - ionic: account for vlan tag len in rx buffer len

   - stmmac: ignore the second clock input, current clock framework does
     not handle exclusive clock use well, other drivers may reconfigure
     the second clock

  Misc:

   - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
     existing scheme"

* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
  net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
  net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
  net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
  r8169: work around power-saving bug on some chip versions
  net: usb: qmi_wwan: add Quectel EM160R-GL
  selftests: mlxsw: Set headroom size of correct port
  net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
  ibmvnic: fix: NULL pointer dereference.
  docs: networking: packet_mmap: fix old config reference
  docs: networking: packet_mmap: fix formatting for C macros
  vhost_net: fix ubuf refcount incorrectly when sendmsg fails
  bareudp: Fix use of incorrect min_headroom size
  bareudp: set NETIF_F_LLTX flag
  net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
  atlantic: remove architecture depends
  erspan: fix version 1 check in gre_parse_header()
  net: hns: fix return value check in __lb_other_process()
  net: sched: prevent invalid Scell_log shift count
  net: neighbor: fix a crash caused by mod zero
  ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
  ...

selftests: mlxsw: Set headroom size of correct port

2021-01-04T21:36:32+00:00

The test was setting the headroom size of the wrong port. This was not
visible because of a firmware bug that canceled this bug.

Set the headroom size of the correct port, so that the test will pass
with both old and new firmware versions.

Fixes: bfa804784e32 ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Link: https://lore.kernel.org/r/20201230114251.394009-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski

Merge tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2020-12-22T22:02:39+00:00

Pull Kbuild updates from Masahiro Yamada:

 - Use /usr/bin/env for shebang lines in scripts

 - Remove useless -Wnested-externs warning flag

 - Update documents

 - Refactor log handling in modpost

 - Stop building modules without MODULE_LICENSE() tag

 - Make the insane combination of 'static' and EXPORT_SYMBOL an error

 - Improve genksyms to handle _Static_assert()

* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation/kbuild: Document platform dependency practises
  Documentation/kbuild: Document COMPILE_TEST dependencies
  genksyms: Ignore module scoped _Static_assert()
  modpost: turn static exports into error
  modpost: turn section mismatches to error from fatal()
  modpost: change license incompatibility to error() from fatal()
  modpost: turn missing MODULE_LICENSE() into error
  modpost: refactor error handling and clarify error/fatal difference
  modpost: rename merror() to error()
  kbuild: don't hardcode depmod path
  kbuild: doc: document subdir-y syntax
  kbuild: doc: clarify the difference between extra-y and always-y
  kbuild: doc: split if_changed explanation to a separate section
  kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
  kbuild: doc: fix 'List directories to visit when descending' section
  kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
  kbuild: doc: update the description about kbuild Makefiles
  Makefile.extrawarn: remove -Wnested-externs warning
  tweewide: Fix most Shebang lines

selftests: mlxsw: Add Q-in-VNI veto tests

2020-12-08T23:45:57+00:00

Add tests to ensure that the forbidden and unsupported cases are indeed
vetoed by mlxsw driver.

Signed-off-by: Amit Cohen 
Reviewed-by: Petr Machata 
Signed-off-by: Ido Schimmel 
Signed-off-by: David S. Miller

tweewide: Fix most Shebang lines

2020-12-08T14:30:04+00:00

Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.

Signed-off-by: Finn Behrens 
Signed-off-by: Masahiro Yamada

selftests: mlxsw: Test RIF's reference count when joining a LAG

2020-12-07T03:22:14+00:00

Test that the reference count of a router interface (RIF) configured for
a LAG is incremented / decremented when ports join / leave the LAG. Use
the offload indication on routes configured on the RIF to understand if
it was created / destroyed.

The test fails without the previous patch.

Signed-off-by: Ido Schimmel 
Signed-off-by: David S. Miller

selftests: forwarding: Add QinQ veto testing

2020-12-01T23:21:13+00:00

Test that each veto that was added in the previous patch, is indeed
vetoed.

$ ./q_in_q_veto.sh

TEST: create 802.1ad vlan upper on top of a front panel             [ OK ]
TEST: create 802.1ad vlan upper on top of a bridge port             [ OK ]
TEST: create 802.1ad vlan upper on top of a lag                     [ OK ]
TEST: create 802.1ad vlan upper on top 802.1q bridge                [ OK ]
TEST: create 802.1ad vlan upper on top 802.1ad bridge               [ OK ]
TEST: create 802.1q vlan upper on top 802.1ad bridge                [ OK ]
TEST: create vlan upper on top of front panel enslaved to 802.1ad bridge
[ OK ]
TEST: create vlan upper on top of lag enslaved to 802.1ad bridge    [ OK ]
TEST: enslave front panel with vlan upper to 802.1ad bridge         [ OK ]
TEST: enslave lag with vlan upper to 802.1ad bridge                 [ OK ]
TEST: IP address addition to 802.1ad bridge                         [ OK ]
TEST: switch bridge protocol                                        [ OK ]

Signed-off-by: Danielle Ratson 
Reviewed-by: Petr Machata 
Signed-off-by: Ido Schimmel 
Signed-off-by: Jakub Kicinski