linux-stable.git/tools/testing/selftests/bpf, branch v5.2.14

selftests/bpf: install files test_xdp_vlan.sh

2019-09-06T08:23:29+00:00

[ Upstream commit 3035bb72ee47d494c041465b4add9c6407c832ed ]

When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't
find file test_xdp_vlan.sh.

 # selftests: bpf: test_xdp_vlan_mode_generic.sh
 # ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such
 file or directory

Rework so that test_xdp_vlan.sh gets installed, added to the variable
TEST_PROGS_EXTENDED.

Fixes: d35661fcf95d ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh")
Signed-off-by: Anders Roxell 
Acked-by: Jesper Dangaard Brouer 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

selftests/bpf: add another gso_segs access

2019-08-29T06:30:04+00:00

[ Upstream commit be69483bf4f3abaaca5d5ba460dbb50239463552 ]

Use BPF_REG_1 for source and destination of gso_segs read,
to exercise "bpf: fix access to skb_shared_info->gso_segs" fix.

Signed-off-by: Eric Dumazet 
Suggested-by: Stanislav Fomichev 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

selftests/bpf: fix sendmsg6_prog on s390

2019-08-29T06:30:01+00:00

[ Upstream commit c8eee4135a456bc031d67cadc454e76880d1afd8 ]

"sendmsg6: rewrite IP & port (C)" fails on s390, because the code in
sendmsg_v6_prog() assumes that (ctx->user_ip6[0] & 0xFFFF) refers to
leading IPv6 address digits, which is not the case on big-endian
machines.

Since checking bitwise operations doesn't seem to be the point of the
test, replace two short comparisons with a single int comparison.

Signed-off-by: Ilya Leoshkevich 
Acked-by: Andrey Ignatov 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

selftests/bpf: reduce time to execute test_xdp_vlan.sh

2019-08-09T15:51:47+00:00

[ Upstream commit 13978d1e73d2fcfb6addcf3392707ad68fa88ccb ]

Given the increasing number of BPF selftests, it makes sense to
reduce the time to execute these tests.  The ping parameters are
adjusted to reduce the time from measures 9 sec to approx 2.8 sec.

Signed-off-by: Jesper Dangaard Brouer 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: add wrapper scripts for test_xdp_vlan.sh

2019-08-09T15:51:47+00:00

[ Upstream commit d35661fcf95d8818c1f9acc818a1bad23dda4e1c ]

In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric)
create two wrapper test scripts, that start the test_xdp_vlan.sh script
with these modes.

Signed-off-by: Jesper Dangaard Brouer 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bpf: fix XDP vlan selftests test_xdp_vlan.sh

2019-08-09T15:51:46+00:00

[ Upstream commit 4de9c89a4982431c4a02739743fd360dc5581f22 ]

Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP.

This selftest was created together with a fix for generic XDP, in commit
297249569932 ("net: fix generic XDP to handle if eth header was
mangled"). And was suppose to catch if generic XDP was broken again.

The tests are using veth and assumed that veth driver didn't support
native driver XDP, thus it used the (ip link set) 'xdp' attach that fell
back to generic-XDP. But veth gained native-XDP support in 948d4f214fde
("veth: Add driver XDP"), which caused this test script to use
native-XDP.

Fixes: 948d4f214fde ("veth: Add driver XDP")
Fixes: 97396ff0bc2d ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers")
Signed-off-by: Jesper Dangaard Brouer 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: do not ignore clang failures

2019-08-06T17:08:08+00:00

[ Upstream commit 9cae4ace80ef39005da106fbb89c952b27d7b89e ]

When compiling an eBPF prog fails, make still returns 0, because
failing clang command's output is piped to llc and therefore its
exit status is ignored.

When clang fails, pipe the string "clang failed" to llc. This will make
llc fail with an informative error message. This solution was chosen
over using pipefail, having separate targets or getting rid of llc
invocation due to its simplicity.

In addition, pull Kbuild.include in order to get .DELETE_ON_ERROR target,
which would cause partial .o files to be removed.

Signed-off-by: Ilya Leoshkevich 
Acked-by: Andrii Nakryiko 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

selftests: bpf: fix inlines in test_lwt_seg6local

2019-07-26T07:10:43+00:00

[ Upstream commit 11aca65ec4db09527d3e9b6b41a0615b7da4386b ]

Selftests are reporting this failure in test_lwt_seg6local.sh:

+ ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
Error fetching program/map!
Failed to parse eBPF program: Operation not permitted

The problem is __attribute__((always_inline)) alone is not enough to prevent
clang from inserting those functions in .text. In that case, .text is not
marked as relocateable.

See the output of objdump -h test_lwt_seg6local.o:

Idx Name          Size      VMA               LMA               File off  Algn
  0 .text         00003530  0000000000000000  0000000000000000  00000040  2**3
                  CONTENTS, ALLOC, LOAD, READONLY, CODE

This causes the iproute bpf loader to fail in bpf_fetch_prog_sec:
bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no
relocateable .text section in the file.

To fix this, convert to 'static __always_inline'.

v2: Use 'static __always_inline' instead of 'static inline
    __attribute__((always_inline))'

Fixes: c99a84eac026 ("selftests/bpf: test for seg6local End.BPF action")
Signed-off-by: Jiri Benc 
Acked-by: Yonghong Song 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

selftests/bpf : clean up feature/ when make clean

2019-07-26T07:10:24+00:00

[ Upstream commit 89cceaa939171fafa153d4bf637b39e396bbd785 ]

An error "implicit declaration of function 'reallocarray'" can be thrown
with the following steps:

$ cd tools/testing/selftests/bpf
$ make clean && make CC=
$ make clean && make CC=

The cause is that the feature folder generated by GCC 4.8.5 is not
removed, leaving feature-reallocarray being 1, which causes reallocarray
not defined when re-compliing with GCC 7.x. This diff adds feature
folder to EXTRA_CLEAN to avoid this problem.

v2: Rephrase the commit message.

Signed-off-by: Hechao Li 
Acked-by: Andrii Nakryiko 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

selftests/bpf: adjust verifier scale test

2019-07-26T07:10:13+00:00

[ Upstream commit 7c0c6095d48dcd0e67c917aa73cdbb2715aafc36 ]

Adjust scale tests to check for new jmp sequence limit.

BPF_JGT had to be changed to BPF_JEQ because the verifier was
too smart. It tracked the known safe range of R0 values
and pruned the search earlier before hitting exact 8192 limit.
bpf_semi_rand_get() was too (un)?lucky.

k = 0; was missing in bpf_fill_scale2.
It was testing a bit shorter sequence of jumps than intended.

Signed-off-by: Alexei Starovoitov 
Acked-by: Andrii Nakryiko 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin