Pull networking updates from Paolo Abeni:
 "The most interesting thing is probably the networking structs
  reorganization and a significant amount of changes is around
  self-tests.

  Core & protocols:

   - Analyze and reorganize core networking structs (socks, netdev,
     netns, mibs) to optimize cacheline consumption and set up build
     time warnings to safeguard against future header changes

     This improves TCP performances with many concurrent connections up
     to 40%

   - Add page-pool netlink-based introspection, exposing the memory
     usage and recycling stats. This helps indentify bad PP users and
     possible leaks

   - Refine TCP/DCCP source port selection to no longer favor even
     source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
     lowers the time taken by connect() for hosts having many active
     connections to the same destination

   - Refactor the TCP bind conflict code, shrinking related socket
     structs

   - Refactor TCP SYN-Cookie handling, as a preparation step to allow
     arbitrary SYN-Cookie processing via eBPF

   - Tune optmem_max for 0-copy usage, increasing the default value to
     128KB and namespecifying it

   - Allow coalescing for cloned skbs coming from page pools, improving
     RX performances with some common configurations

   - Reduce extension header parsing overhead at GRO time

   - Add bridge MDB bulk deletion support, allowing user-space to
     request the deletion of matching entries

   - Reorder nftables struct members, to keep data accessed by the
     datapath first

   - Introduce TC block ports tracking and use. This allows supporting
     multicast-like behavior at the TC layer

   - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
     classifiers (RSVP and tcindex)

   - More data-race annotations

   - Extend the diag interface to dump TCP bound-only sockets

   - Conditional notification of events for TC qdisc class and actions

   - Support for WPAN dynamic associations with nearby devices, to form
     a sub-network using a specific PAN ID

   - Implement SMCv2.1 virtual ISM device support

   - Add support for Batman-avd mulicast packet type

  BPF:

   - Tons of verifier improvements:
       - BPF register bounds logic and range support along with a large
         test suite
       - log improvements
       - complete precision tracking support for register spills
       - track aligned STACK_ZERO cases as imprecise spilled registers.
         This improves the verifier "instructions processed" metric from
         single digit to 50-60% for some programs
       - support for user's global BPF subprogram arguments with few
         commonly requested annotations for a better developer
         experience
       - support tracking of BPF_JNE which helps cases when the compiler
         transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
         like
       - several fixes

   - Add initial TX metadata implementation for AF_XDP with support in
     mlx5 and stmmac drivers. Two types of offloads are supported right
     now, that is, TX timestamp and TX checksum offload

   - Fix kCFI bugs in BPF all forms of indirect calls from BPF into
     kernel and from kernel into BPF work with CFI enabled. This allows
     BPF to work with CONFIG_FINEIBT=y

   - Change BPF verifier logic to validate global subprograms lazily
     instead of unconditionally before the main program, so they can be
     guarded using BPF CO-RE techniques

   - Support uid/gid options when mounting bpffs

   - Add a new kfunc which acquires the associated cgroup of a task
     within a specific cgroup v1 hierarchy where the latter is
     identified by its id

   - Extend verifier to allow bpf_refcount_acquire() of a map value
     field obtained via direct load which is a use-case needed in
     sched_ext

   - Add BPF link_info support for uprobe multi link along with bpftool
     integration for the latter

   - Support for VLAN tag in XDP hints

   - Remove deprecated bpfilter kernel leftovers given the project is
     developed in user-space (https://github.com/facebook/bpfilter)

  Misc:

   - Support for parellel TC self-tests execution

   - Increase MPTCP self-tests coverage

   - Updated the bridge documentation, including several so-far
     undocumented features

   - Convert all the net self-tests to run in unique netns, to avoid
     random failures due to conflict and allow concurrent runs

   - Add TCP-AO self-tests

   - Add kunit tests for both cfg80211 and mac80211

   - Autogenerate Netlink families documentation from YAML spec

   - Add yml-gen support for fixed headers and recursive nests, the tool
     can now generate user-space code for all genetlink families for
     which we have specs

   - A bunch of additional module descriptions fixes

   - Catch incorrect freeing of pages belonging to a page pool

  Driver API:

   - Rust abstractions for network PHY drivers; do not cover yet the
     full C API, but already allow implementing functional PHY drivers
     in rust

   - Introduce queue and NAPI support in the netdev Netlink interface,
     allowing complete access to the device <> NAPIs <> queues
     relationship

   - Introduce notifications filtering for devlink to allow control
     application scale to thousands of instances

   - Improve PHY validation, requesting rate matching information for
     each ethtool link mode supported by both the PHY and host

   - Add support for ethtool symmetric-xor RSS hash

   - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
     platform

   - Expose pin fractional frequency offset value over new DPLL generic
     netlink attribute

   - Convert older drivers to platform remove callback returning void

   - Add support for PHY package MMD read/write

  New hardware / drivers:

   - Ethernet:
       - Octeon CN10K devices
       - Broadcom 5760X P7
       - Qualcomm SM8550 SoC
       - Texas Instrument DP83TG720S PHY

   - Bluetooth:
       - IMC Networks Bluetooth radio

  Removed:

   - WiFi:
       - libertas 16-bit PCMCIA support
       - Atmel at76c50x drivers
       - HostAP ISA/PCMCIA style 802.11b driver
       - zd1201 802.11b USB dongles
       - Orinoco ISA/PCMCIA 802.11b driver
       - Aviator/Raytheon driver
       - Planet WL3501 driver
       - RNDIS USB 802.11b driver

  Driver updates:

   - Ethernet high-speed NICs:
       - Intel (100G, ice, idpf):
          - allow one by one port representors creation and removal
          - add temperature and clock information reporting
          - add get/set for ethtool's header split ringparam
          - add again FW logging
          - adds support switchdev hardware packet mirroring
          - iavf: implement symmetric-xor RSS hash
          - igc: add support for concurrent physical and free-running
            timers
          - i40e: increase the allowable descriptors
       - nVidia/Mellanox:
          - Preparation for Socket-Direct multi-dev netdev. That will
            allow in future releases combining multiple PFs devices
            attached to different NUMA nodes under the same netdev
       - Broadcom (bnxt):
          - TX completion handling improvements
          - add basic ntuple filter support
          - reduce MSIX vectors usage for MQPRIO offload
          - add VXLAN support, USO offload and TX coalesce completion
            for P7
       - Marvell Octeon EP:
          - xmit-more support
          - add PF-VF mailbox support and use it for FW notifications
            for VFs
       - Wangxun (ngbe/txgbe):
          - implement ethtool functions to operate pause param, ring
            param, coalesce channel number and msglevel
       - Netronome/Corigine (nfp):
          - add flow-steering support
          - support UDP segmentation offload

   - Ethernet NICs embedded, slower, virtual:
       - Xilinx AXI: remove duplicate DMA code adopting the dma engine
         driver
       - stmmac: add support for HW-accelerated VLAN stripping
       - TI AM654x sw: add mqprio, frame preemption & coalescing
       - gve: add support for non-4k page sizes.
       - virtio-net: support dynamic coalescing moderation

   - nVidia/Mellanox Ethernet datacenter switches:
       - allow firmware upgrade without a reboot
       - more flexible support for bridge flooding via the compressed
         FID flooding mode

   - Ethernet embedded switches:
       - Microchip:
          - fine-tune flow control and speed configurations in KSZ8xxx
          - KSZ88X3: enable setting rmii reference
       - Renesas:
          - add jumbo frames support
       - Marvell:
          - 88E6xxx: add "eth-mac" and "rmon" stats support

   - Ethernet PHYs:
       - aquantia: add firmware load support
       - at803x: refactor the driver to simplify adding support for more
         chip variants
       - NXP C45 TJA11xx: Add MACsec offload support

   - Wifi:
       - MediaTek (mt76):
          - NVMEM EEPROM improvements
          - mt7996 Extremely High Throughput (EHT) improvements
          - mt7996 Wireless Ethernet Dispatcher (WED) support
          - mt7996 36-bit DMA support
       - Qualcomm (ath12k):
          - support for a single MSI vector
          - WCN7850: support AP mode
       - Intel (iwlwifi):
          - new debugfs file fw_dbg_clear
          - allow concurrent P2P operation on DFS channels

   - Bluetooth:
       - QCA2066: support HFP offload
       - ISO: more broadcast-related improvements
       - NXP: better recovery in case receiver/transmitter get out of sync"

* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
  lan78xx: remove redundant statement in lan78xx_get_eee
  lan743x: remove redundant statement in lan743x_ethtool_get_eee
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
  bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
  tcp: Revert no longer abort SYN_SENT when receiving some ICMP
  Revert "mlx5 updates 2023-12-20"
  Revert "net: stmmac: Enable Per DMA Channel interrupt"
  ipvlan: Remove usage of the deprecated ida_simple_xx() API
  ipvlan: Fix a typo in a comment
  net/sched: Remove ipt action tests
  net: stmmac: Use interrupt mode INTM=1 for per channel irq
  net: stmmac: Add support for TX/RX channel interrupt
  net: stmmac: Make MSI interrupt routine generic
  dt-bindings: net: snps,dwmac: per channel irq
  net: phy: at803x: make read_status more generic
  net: phy: at803x: add support for cdt cross short test for qca808x
  net: phy: at803x: refactor qca808x cable test get status function
  net: phy: at803x: generalize cdt fault length function
  net: ethernet: cortina: Drop TSO support
  ...

Pull security module updates from Paul Moore:

 - Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
   lsm_set_self_attr().

   The first syscall simply lists the LSMs enabled, while the second and
   third get and set the current process' LSM attributes. Yes, these
   syscalls may provide similar functionality to what can be found under
   /proc or /sys, but they were designed to support multiple,
   simultaneaous (stacked) LSMs from the start as opposed to the current
   /proc based solutions which were created at a time when only one LSM
   was allowed to be active at a given time.

   We have spent considerable time discussing ways to extend the
   existing /proc interfaces to support multiple, simultaneaous LSMs and
   even our best ideas have been far too ugly to support as a kernel
   API; after +20 years in the kernel, I felt the LSM layer had
   established itself enough to justify a handful of syscalls.

   Support amongst the individual LSM developers has been nearly
   unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
   is worried that the LSM_ID_XXX token concept will make it more
   difficult for out-of-tree LSMs to survive. Several members of the LSM
   community have demonstrated the ability for out-of-tree LSMs to
   continue to exist by picking high/unused LSM_ID values as well as
   pointing out that many kernel APIs rely on integer identifiers, e.g.
   syscalls (!), but unfortunately Tetsuo's objections remain.

   My personal opinion is that while I have no interest in penalizing
   out-of-tree LSMs, I'm not going to penalize in-tree development to
   support out-of-tree development, and I view this as a necessary step
   forward to support the push for expanded LSM stacking and reduce our
   reliance on /proc and /sys which has occassionally been problematic
   for some container users. Finally, we have included the linux-api
   folks on (all?) recent revisions of the patchset and addressed all of
   their concerns.

 - Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
   ioctls on 64-bit systems problem.

   This patch includes support for all of the existing LSMs which
   provide ioctl hooks, although it turns out only SELinux actually
   cares about the individual ioctls. It is worth noting that while
   Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
   patch, they did both indicate they are okay with the changes.

 - Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
   at boot.

   While it's good that we are fixing this, I doubt this is something
   users are seeing in the wild as you need to both disable IPv6 and
   then attempt to configure IPv6 labeled networking via
   NetLabel/CALIPSO; that just doesn't make much sense.

   Normally this would go through netdev, but Jakub asked me to take
   this patch and of all the trees I maintain, the LSM tree seemed like
   the best fit.

 - Update the LSM MAINTAINERS entry with additional information about
   our process docs, patchwork, bug reporting, etc.

   I also noticed that the Lockdown LSM is missing a dedicated
   MAINTAINERS entry so I've added that to the pull request. I've been
   working with one of the major Lockdown authors/contributors to see if
   they are willing to step up and assume a Lockdown maintainer role;
   hopefully that will happen soon, but in the meantime I'll continue to
   look after it.

 - Add a handful of mailmap entries for Serge Hallyn and myself.

* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
  lsm: new security_file_ioctl_compat() hook
  lsm: Add a __counted_by() annotation to lsm_ctx.ctx
  calipso: fix memory leak in netlbl_calipso_add_pass()
  selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
  MAINTAINERS: add an entry for the lockdown LSM
  MAINTAINERS: update the LSM entry
  mailmap: add entries for Serge Hallyn's dead accounts
  mailmap: update/replace my old email addresses
  lsm: mark the lsm_id variables are marked as static
  lsm: convert security_setselfattr() to use memdup_user()
  lsm: align based on pointer length in lsm_fill_user_ctx()
  lsm: consolidate buffer size handling into lsm_fill_user_ctx()
  lsm: correct error codes in security_getselfattr()
  lsm: cleanup the size counters in security_getselfattr()
  lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
  lsm: drop LSM_ID_IMA
  LSM: selftests for Linux Security Module syscalls
  SELinux: Add selfattr hooks
  AppArmor: Add selfattr hooks
  Smack: implement setselfattr and getselfattr hooks
  ...

Pull vfs mount updates from Christian Brauner:
 "This contains the work to retrieve detailed information about mounts
  via two new system calls. This is hopefully the beginning of the end
  of the saga that started with fsinfo() years ago.

  The LWN articles in [1] and [2] can serve as a summary so we can avoid
  rehashing everything here.

  At LSFMM in May 2022 we got into a room and agreed on what we want to
  do about fsinfo(). Basically, split it into pieces. This is the first
  part of that agreement. Specifically, it is concerned with retrieving
  information about mounts. So this only concerns the mount information
  retrieval, not the mount table change notification, or the extended
  filesystem specific mount option work. That is separate work.

  Currently mounts have a 32bit id. Mount ids are already in heavy use
  by libmount and other low-level userspace but they can't be relied
  upon because they're recycled very quickly. We agreed that mounts
  should carry a unique 64bit id by which they can be referenced
  directly. This is now implemented as part of this work.

  The new 64bit mount id is exposed in statx() through the new
  STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
  returned. If it is raised and the kernel supports the new 64bit mount
  id the flag is raised in the result mask and the new 64bit mount id is
  returned. New and old mount ids do not overlap so they cannot be
  conflated.

  Two new system calls are introduced that operate on the 64bit mount
  id: statmount() and listmount(). A summary of the api and usage can be
  found on LWN as well (cf. [3]) but of course, I'll provide a summary
  here as well.

  Both system calls rely on struct mnt_id_req. Which is the request
  struct used to pass the 64bit mount id identifying the mount to
  operate on. It is extensible to allow for the addition of new
  parameters and for future use in other apis that make use of mount
  ids.

  statmount() mimicks the semantics of statx() and exposes a set flags
  that userspace may raise in mnt_id_req to request specific information
  to be retrieved. A statmount() call returns a struct statmount filled
  in with information about the requested mount. Supported requests are
  indicated by raising the request flag passed in struct mnt_id_req in
  the @mask argument in struct statmount.

  Currently we do support:

   - STATMOUNT_SB_BASIC:
     Basic filesystem info

   - STATMOUNT_MNT_BASIC
     Mount information (mount id, parent mount id, mount attributes etc)

   - STATMOUNT_PROPAGATE_FROM
     Propagation from what mount in current namespace

   - STATMOUNT_MNT_ROOT
     Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)

   - STATMOUNT_MNT_POINT
     Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)

   - STATMOUNT_FS_TYPE
     Name of the filesystem type as the magic number isn't enough due to submounts

  The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
  are appended to the end of the struct. Userspace can use the offsets
  in @fs_type, @mnt_root, and @mnt_point to reference those strings
  easily.

  The struct statmount reserves quite a bit of space currently for
  future extensibility. This isn't really a problem and if this bothers
  us we can just send a follow-up pull request during this cycle.

  listmount() is given a 64bit mount id via mnt_id_req just as
  statmount(). It takes a buffer and a size to return an array of the
  64bit ids of the child mounts of the requested mount. Userspace can
  thus choose to either retrieve child mounts for a mount in batches or
  iterate through the child mounts. For most use-cases it will be
  sufficient to just leave space for a few child mounts. But for big
  mount tables having an iterator is really helpful. Iterating through a
  mount table works by setting @param in mnt_id_req to the mount id of
  the last child mount retrieved in the previous listmount() call"

Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]

* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  add selftest for statmount/listmount
  fs: keep struct mnt_id_req extensible
  wire up syscalls for statmount/listmount
  add listmount(2) syscall
  statmount: simplify string option retrieval
  statmount: simplify numeric option retrieval
  add statmount(2) syscall
  namespace: extract show_path() helper
  mounts: keep list of mounts in an rbtree
  add unique mount ID

Pull misc vfs updates from Christian Brauner:
 "This contains the usual miscellaneous features, cleanups, and fixes
  for vfs and individual fses.

  Features:

   - Add Jan Kara as VFS reviewer

   - Show correct device and inode numbers in proc/<pid>/maps for vma
     files on stacked filesystems. This is now easily doable thanks to
     the backing file work from the last cycles. This comes with
     selftests

  Cleanups:

   - Remove a redundant might_sleep() from wait_on_inode()

   - Initialize pointer with NULL, not 0

   - Clarify comment on access_override_creds()

   - Rework and simplify eventfd_signal() and eventfd_signal_mask()
     helpers

   - Process aio completions in batches to avoid needless wakeups

   - Completely decouple struct mnt_idmap from namespaces. We now only
     keep the actual idmapping around and don't stash references to
     namespaces

   - Reformat maintainer entries to indicate that a given subsystem
     belongs to fs/

   - Simplify fput() for files that were never opened

   - Get rid of various pointless file helpers

   - Rename various file helpers

   - Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
     last cycle

   - Make relatime_need_update() return bool

   - Use GFP_KERNEL instead of GFP_USER when allocating superblocks

   - Replace deprecated ida_simple_*() calls with their current ida_*()
     counterparts

  Fixes:

   - Fix comments on user namespace id mapping helpers. They aren't
     kernel doc comments so they shouldn't be using /**

   - s/Retuns/Returns/g in various places

   - Add missing parameter documentation on can_move_mount_beneath()

   - Rename i_mapping->private_data to i_mapping->i_private_data

   - Fix a false-positive lockdep warning in pipe_write() for watch
     queues

   - Improve __fget_files_rcu() code generation to improve performance

   - Only notify writer that pipe resizing has finished after setting
     pipe->max_usage otherwise writers are never notified that the pipe
     has been resized and hang

   - Fix some kernel docs in hfsplus

   - s/passs/pass/g in various places

   - Fix kernel docs in ntfs

   - Fix kcalloc() arguments order reported by gcc 14

   - Fix uninitialized value in reiserfs"

* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
  reiserfs: fix uninit-value in comp_keys
  watch_queue: fix kcalloc() arguments order
  ntfs: dir.c: fix kernel-doc function parameter warnings
  fs: fix doc comment typo fs tree wide
  selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
  fs/proc: show correct device and inode numbers in /proc/pid/maps
  eventfd: Remove usage of the deprecated ida_simple_xx() API
  fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
  fs/hfsplus: wrapper.c: fix kernel-doc warnings
  fs: add Jan Kara as reviewer
  fs/inode: Make relatime_need_update return bool
  pipe: wakeup wr_wait after setting max_usage
  file: remove __receive_fd()
  file: stop exposing receive_fd_user()
  fs: replace f_rcuhead with f_task_work
  file: remove pointless wrapper
  file: s/close_fd_get_file()/file_close_fd()/g
  Improve __fget_files_rcu() code generation (and thus __fget_light())
  file: massage cleanup of files that failed to open
  fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
  ...

Cross-merge networking fixes after downstream PR.

Adjacent changes:

drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
  23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
  6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")

tools/testing/selftests/net/Makefile
  2258b666482d ("selftests: add vlan hw filter tests")
  a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When mapping a file on overlayfs, the file stored in ->vm_file is a
backing file whose f_inode is on the underlying filesystem. We need to
verify that /proc/pid/maps contains numbers of the overlayfs file, but
not its backing file.

Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20231214064439.1023011-2-avagin@google.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Provide functions to create selftests dedicated to TCP-AO.
They can run in parallel, as they use temporary net namespaces.
They can be very specific to the feature being tested.
This will allow to create a lot of TCP-AO tests, without complicating
one binary with many --options and to create scenarios, that are
hard to put in bash script that uses one binary.

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initial selftest for the new statmount() and listmount() syscalls.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231213161104.403171-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>

This reverts commit 9fc96c7c19df ("selftests: error out if kernel header
files are not yet built").

It turns out that requiring the kernel headers to be built as a
prerequisite to building selftests, does not work in many cases. For
example, Peter Zijlstra writes:

"My biggest beef with the whole thing is that I simply do not want to use
'make headers', it doesn't work for me.

I have a ton of output directories and I don't care to build tools into
the output dirs, in fact some of them flat out refuse to work that way
(bpf comes to mind)." [1]

Therefore, stop erroring out on the selftests build. Additional patches
will be required in order to change over to not requiring the kernel
headers.

[1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net

Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add selftests for the three system calls supporting the LSM
infrastructure. This set of tests is limited by the differences
in access policy enforced by the existing security modules.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Tested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>