linux-stable.git/tools/power, branch v4.14.331 Linux kernel stable tree cpupower: add Makefile dependencies for install targets 2023-10-10T19:43:41+00:00 Ivan Babrou ivan@cloudflare.com 2021-01-04T23:57:18+00:00 aff504ed631d349a5b9bd408d306cf19964d087c commit fb7791e213a64495ec2336869b868fcd8af14346 upstream. This allows building cpupower in parallel rather than serially. Signed-off-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fb7791e213a64495ec2336869b868fcd8af14346 upstream.

This allows building cpupower in parallel rather than serially.

Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpupower: Make TSC read per CPU for Mperf monitor 2023-05-30T11:38:36+00:00 Wyes Karny wyes.karny@amd.com 2023-05-04T06:25:44+00:00 1d09139a173d543ffb20a47ddaa29133f513ccfc [ Upstream commit c2adb1877b76fc81ae041e1db1a6ed2078c6746b ] System-wide TSC read could cause a drift in C0 percentage calculation. Because if first TSC is read and then one by one mperf is read for all cpus, this introduces drift between mperf reading of later CPUs and TSC reading. To lower this drift read TSC per CPU and also just after mperf read. This technique improves C0 percentage calculation in Mperf monitor. Before fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 0| 256| 84.62| 15.38| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 1| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 257| 84.08| 15.92| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 2| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 258| 83.26| 16.74| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 3| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 259| 83.60| 16.40| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 4| 86.33| 13.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 260| 83.33| 16.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 5| 86.06| 13.94| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 261| 83.05| 16.95| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 6| 6| 85.51| 14.49| 2695||168659003|3970468|| 0.00| 0.00| 0.00 After fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 98.03| 1.97| 2415||163295480|3811189|| 0.00| 0.00| 0.00 0| 0| 256| 98.50| 1.50| 2394||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 1| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 257| 99.99| 0.01| 2375||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 2| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 258|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 3|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 259| 99.99| 0.01| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 4|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 260|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 5| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 261|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 6|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 262|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 Cc: Thomas Renninger <trenn@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features") Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c2adb1877b76fc81ae041e1db1a6ed2078c6746b ]

System-wide TSC read could cause a drift in C0 percentage calculation.
Because if first TSC is read and then one by one mperf is read for all
cpus, this introduces drift between mperf reading of later CPUs and TSC
reading.  To lower this drift read TSC per CPU and also just after mperf
read.  This technique improves C0 percentage calculation in Mperf monitor.

Before fix: (System 100% busy)

              | Mperf              || RAPL        || Idle_Stats
 PKG|CORE| CPU| C0   | Cx   | Freq  || pack | core  || POLL | C1   | C2
   0|   0|   0| 87.15| 12.85|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   0| 256| 84.62| 15.38|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   1|   1| 87.15| 12.85|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   1| 257| 84.08| 15.92|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   2|   2| 86.61| 13.39|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   2| 258| 83.26| 16.74|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   3|   3| 86.61| 13.39|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   3| 259| 83.60| 16.40|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   4|   4| 86.33| 13.67|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   4| 260| 83.33| 16.67|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   5|   5| 86.06| 13.94|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   5| 261| 83.05| 16.95|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   6|   6| 85.51| 14.49|  2695||168659003|3970468||  0.00|  0.00| 0.00

After fix: (System 100% busy)

             | Mperf              || RAPL        || Idle_Stats
 PKG|CORE| CPU| C0   | Cx   | Freq  || pack | core  || POLL | C1   | C2
   0|   0|   0| 98.03|  1.97|  2415||163295480|3811189||  0.00|  0.00| 0.00
   0|   0| 256| 98.50|  1.50|  2394||163295480|3811189||  0.00|  0.00| 0.00
   0|   1|   1| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   1| 257| 99.99|  0.01|  2375||163295480|3811189||  0.00|  0.00| 0.00
   0|   2|   2| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   2| 258|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   3|   3|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   3| 259| 99.99|  0.01|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   4|   4|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   4| 260|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   5|   5| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   5| 261|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   6|   6|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   6| 262|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00

Cc: Thomas Renninger <trenn@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>

Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tweewide: Fix most Shebang lines 2021-06-03T06:36:11+00:00 Finn Behrens me@kloenk.de 2020-11-23T14:15:33+00:00 5ea96edf5d75c3d1c3fa4f7bb70a33e183d04698 commit c25ce589dca10d64dde139ae093abc258a32869c upstream. Change every shebang which does not need an argument to use /usr/bin/env. This is needed as not every distro has everything under /usr/bin, sometimes not even bash. Signed-off-by: Finn Behrens <me@kloenk.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> [nicolas@fjasle.eu: update contexts for v4.14, adapt for old scripts] Signed-off-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c25ce589dca10d64dde139ae093abc258a32869c upstream.

Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.

Signed-off-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nicolas@fjasle.eu: update contexts for v4.14, adapt for old scripts]
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility 2020-10-01T11:12:32+00:00 Doug Smythies doug.smythies@gmail.com 2020-01-28T03:59:56+00:00 feae5c4d7a7c9a3de5aa77c6e1388590bc59e7da [ Upstream commit e749e09db30c38f1a275945814b0109e530a07b0 ] Some syntax needs to be more rigorous for python 3. Backwards compatibility tested with python 2.7 Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e749e09db30c38f1a275945814b0109e530a07b0 ]

Some syntax needs to be more rigorous for python 3.
Backwards compatibility tested with python 2.7

Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tools/power turbostat: Fix gcc build warnings 2020-04-13T08:34:20+00:00 Len Brown len.brown@intel.com 2020-03-19T22:33:12+00:00 3069eab7eeb3da3f42e04ed5422a46bbad3f8c67 [ Upstream commit d8d005ba6afa502ca37ced5782f672c4d2fc1515 ] Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size [-Wstringop-truncation] reduce param to strncpy, to guarantee that a null byte is always copied into destination buffer. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d8d005ba6afa502ca37ced5782f672c4d2fc1515 ]

Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size
	[-Wstringop-truncation]

reduce param to strncpy, to guarantee that a null byte is always copied
into destination buffer.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
cpupower: avoid multiple definition with gcc -fno-common 2020-04-02T14:34:26+00:00 Mike Gilbert floppym@gentoo.org 2020-02-26T19:33:59+00:00 2c1f4d27781351a85333c267c9a06f41ba526921 [ Upstream commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b ] Building cpupower with -fno-common in CFLAGS results in errors due to multiple definitions of the 'cpu_count' and 'start_time' variables. ./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: multiple definition of `cpu_count'; ./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: first defined here ... ./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22: multiple definition of `start_time'; ./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85: first defined here The -fno-common option will be enabled by default in GCC 10. Bug: https://bugs.gentoo.org/707462 Signed-off-by: Mike Gilbert <floppym@gentoo.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b ]

Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.

./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here

The -fno-common option will be enabled by default in GCC 10.

Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tools/power/acpi: fix compilation error 2020-02-14T21:32:22+00:00 Zhengyuan Liu liuzhengyuan@kylinos.cn 2019-12-13T16:27:12+00:00 4a7a57c810a891ac924462de512f5e9cc81f6aee commit 1985f8c7f9a42a651a9750d6fcadc74336d182df upstream. If we compile tools/acpi target in the top source directory, we'd get a compilation error showing as bellow: # make tools/acpi DESCEND power/acpi DESCEND tools/acpidbg CC tools/acpidbg/acpidbg.o Assembler messages: Fatal error: can't create /home/lzy/kernel-upstream/power/acpi/\ tools/acpidbg/acpidbg.o: No such file or directory ../../Makefile.rules:26: recipe for target '/home/lzy/kernel-upstream/\ power/acpi/tools/acpidbg/acpidbg.o' failed make[3]: *** [/home/lzy/kernel-upstream//power/acpi/tools/acpidbg/\ acpidbg.o] Error 1 Makefile:19: recipe for target 'acpidbg' failed make[2]: *** [acpidbg] Error 2 Makefile:54: recipe for target 'acpi' failed make[1]: *** [acpi] Error 2 Makefile:1607: recipe for target 'tools/acpi' failed make: *** [tools/acpi] Error 2 Fixes: d5a4b1a540b8 ("tools/power/acpi: Remove direct kernel source include reference") Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1985f8c7f9a42a651a9750d6fcadc74336d182df upstream.

If we compile tools/acpi target in the top source directory, we'd get a
compilation error showing as bellow:

	# make tools/acpi
	  DESCEND  power/acpi
	  DESCEND  tools/acpidbg
	  CC       tools/acpidbg/acpidbg.o
	Assembler messages:
	Fatal error: can't create /home/lzy/kernel-upstream/power/acpi/\
			tools/acpidbg/acpidbg.o: No such file or directory
	../../Makefile.rules:26: recipe for target '/home/lzy/kernel-upstream/\
			power/acpi/tools/acpidbg/acpidbg.o' failed
	make[3]: *** [/home/lzy/kernel-upstream//power/acpi/tools/acpidbg/\
			acpidbg.o] Error 1
	Makefile:19: recipe for target 'acpidbg' failed
	make[2]: *** [acpidbg] Error 2
	Makefile:54: recipe for target 'acpi' failed
	make[1]: *** [acpi] Error 2
	Makefile:1607: recipe for target 'tools/acpi' failed
	make: *** [tools/acpi] Error 2

Fixes: d5a4b1a540b8 ("tools/power/acpi: Remove direct kernel source include reference")
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tools/power/cpupower: Fix initializer override in hsw_ext_cstates 2019-12-31T11:36:54+00:00 Nathan Chancellor natechancellor@gmail.com 2019-09-27T16:26:42+00:00 5790fca95d46eaa94a3ddb6cd163509a8b73741b [ Upstream commit 7e5705c635ecfccde559ebbbe1eaf05b5cc60529 ] When building cpupower with clang, the following warning appears: utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] .desc = N_("Processor Package C2"), ^~~~~~~~~~~~~~~~~~~~~~ ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_' #define N_(String) gettext_noop(String) ^~~~~~ ./utils/helpers/helpers.h:23:30: note: expanded from macro 'gettext_noop' #define gettext_noop(String) String ^~~~~~ utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization is here .desc = N_("Processor Package C9"), ^~~~~~~~~~~~~~~~~~~~~~ ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_' #define N_(String) gettext_noop(String) ^~~~~~ ./utils/helpers/helpers.h:23:30: note: expanded from macro 'gettext_noop' #define gettext_noop(String) String ^~~~~~ 1 warning generated. This appears to be a copy and paste or merge mistake because the name and id fields both have PC9 in them, not PC2. Remove the second assignment to fix the warning. Fixes: 7ee767b69b68 ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states") Link: https://github.com/ClangBuiltLinux/linux/issues/718 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7e5705c635ecfccde559ebbbe1eaf05b5cc60529 ]

When building cpupower with clang, the following warning appears:

 utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides
 prior initialization of this subobject [-Winitializer-overrides]
                 .desc                   = N_("Processor Package C2"),
                                              ^~~~~~~~~~~~~~~~~~~~~~
 ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
 #define N_(String) gettext_noop(String)
                                 ^~~~~~
 ./utils/helpers/helpers.h:23:30: note: expanded from macro
 'gettext_noop'
 #define gettext_noop(String) String
                              ^~~~~~
 utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization
 is here
                 .desc                   = N_("Processor Package C9"),
                                              ^~~~~~~~~~~~~~~~~~~~~~
 ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
 #define N_(String) gettext_noop(String)
                                 ^~~~~~
 ./utils/helpers/helpers.h:23:30: note: expanded from macro
 'gettext_noop'
 #define gettext_noop(String) String
                             ^~~~~~
 1 warning generated.

This appears to be a copy and paste or merge mistake because the name
and id fields both have PC9 in them, not PC2. Remove the second
assignment to fix the warning.

Fixes: 7ee767b69b68 ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states")
Link: https://github.com/ClangBuiltLinux/linux/issues/718
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ACPICA: Use %d for signed int print formatting instead of %u 2019-12-01T08:14:11+00:00 Colin Ian King colin.king@canonical.com 2018-11-05T17:43:52+00:00 1939580da1f592c7ba8122b02c6d6532ed64452e [ Upstream commit f8ddf49b420112e28bdd23d7ad52d7991a0ccbe3 ] Fix warnings found using static analysis with cppcheck, use %d printf format specifier for signed ints rather than %u Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f8ddf49b420112e28bdd23d7ad52d7991a0ccbe3 ]

Fix warnings found using static analysis with cppcheck, use %d printf
format specifier for signed ints rather than %u

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tools/power turbostat: fix buffer overrun 2019-09-21T05:15:42+00:00 Naoya Horiguchi n-horiguchi@ah.jp.nec.com 2019-04-03T07:02:14+00:00 20a2f5951e88a8a29176a11ead3a13955a326599 [ Upstream commit eeb71c950bc6eee460f2070643ce137e067b234c ] turbostat could be terminated by general protection fault on some latest hardwares which (for example) support 9 levels of C-states and show 18 "tADDED" lines. That bloats the total output and finally causes buffer overrun. So let's extend the buffer to avoid this. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit eeb71c950bc6eee460f2070643ce137e067b234c ]

turbostat could be terminated by general protection fault on some latest
hardwares which (for example) support 9 levels of C-states and show 18
"tADDED" lines. That bloats the total output and finally causes buffer
overrun.  So let's extend the buffer to avoid this.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>