linux-stable.git/tools/perf, branch linux-5.7.y

perf bench mem: Always memset source before memcpy

2020-08-21T11:07:43+00:00

[ Upstream commit 1beaef29c34154ccdcb3f1ae557f6883eda18840 ]

For memcpy, the source pages are memset to zero only when --cycles is
used.  This leads to wildly different results with or without --cycles,
since all sources pages are likely to be mapped to the same zero page
without explicit writes.

Before this fix:

$ export cmd="./perf stat -e LLC-loads -- ./perf bench \
  mem memcpy -s 1024MB -l 100 -f default"
$ $cmd

         2,935,826      LLC-loads
       3.821677452 seconds time elapsed

$ $cmd --cycles

       217,533,436      LLC-loads
       8.616725985 seconds time elapsed

After this fix:

$ $cmd

       214,459,686      LLC-loads
       8.674301124 seconds time elapsed

$ $cmd --cycles

       214,758,651      LLC-loads
       8.644480006 seconds time elapsed

Fixes: 47b5757bac03c338 ("perf bench mem: Move boilerplate memory allocation to the infrastructure")
Signed-off-by: Vincent Whitchurch 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Mark Rutland 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Cc: kernel@axis.com
Link: http://lore.kernel.org/lkml/20200810133404.30829-1-vincent.whitchurch@axis.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf intel-pt: Fix duplicate branch after CBR

2020-08-21T11:07:30+00:00

commit a58a057ce65b52125dd355b7d8b0d540ea267a5f upstream.

CBR events can result in a duplicate branch event, because the state
type defaults to a branch. Fix by clearing the state type.

Example: trace 'sleep' and hope for a frequency change

 Before:

   $ perf record -e intel_pt//u sleep 0.1
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.034 MB perf.data ]
   $ perf script --itrace=bpe > before.txt

 After:

   $ perf script --itrace=bpe > after.txt
   $ diff -u before.txt after.txt
#  --- before.txt  2020-07-07 14:42:18.191508098 +0300
#  +++ after.txt   2020-07-07 14:42:36.587891753 +0300
   @@ -29673,7 +29673,6 @@
               sleep 93431 [007] 15411.619905:          1  branches:u:                 0 [unknown] ([unknown]) =>     7f0818abb2e0 clock_nanosleep@@GLIBC_2.17+0x0 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.619905:          1  branches:u:      7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>                0 [unknown] ([unknown])
               sleep 93431 [007] 15411.720069:         cbr:  cbr: 15 freq: 1507 MHz ( 56%)         7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
   -           sleep 93431 [007] 15411.720069:          1  branches:u:      7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>                0 [unknown] ([unknown])
               sleep 93431 [007] 15411.720076:          1  branches:u:                 0 [unknown] ([unknown]) =>     7f0818abb30e clock_nanosleep@@GLIBC_2.17+0x2e (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.720077:          1  branches:u:      7f0818abb323 clock_nanosleep@@GLIBC_2.17+0x43 (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>     7f0818ac0eb7 __nanosleep+0x17 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.720077:          1  branches:u:      7f0818ac0ebf __nanosleep+0x1f (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>     55cb7e4c2827 rpl_nanosleep+0x97 (/usr/bin/sleep)

Fixes: 91de8684f1cff ("perf intel-pt: Cater for CBR change in PSB+")
Fixes: abe5a1d3e4bee ("perf intel-pt: Decoder to output CBR changes immediately")
Signed-off-by: Adrian Hunter 
Reviewed-by: Andi Kleen 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Fix FUP packet state

2020-08-21T11:07:30+00:00

commit 401136bb084fd021acd9f8c51b52fe0a25e326b2 upstream.

While walking code towards a FUP ip, the packet state is
INTEL_PT_STATE_FUP or INTEL_PT_STATE_FUP_NO_TIP. That was mishandled
resulting in the state becoming INTEL_PT_STATE_IN_SYNC prematurely.  The
result was an occasional lost EXSTOP event.

Signed-off-by: Adrian Hunter 
Reviewed-by: Andi Kleen 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf probe: Fix memory leakage when the probe point is not found

2020-08-21T11:07:30+00:00

commit 12d572e785b15bc764e956caaa8a4c846fd15694 upstream.

Fix the memory leakage in debuginfo__find_trace_events() when the probe
point is not found in the debuginfo. If there is no probe point found in
the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0.

Thus the caller of debuginfo__find_probes() must check the tf.ntevs and
release the allocated memory for the array of struct probe_trace_event.

The current code releases the memory only if the debuginfo__find_probes()
hits an error but not checks tf.ntevs. In the result, the memory allocated
on *tevs are not released if tf.ntevs == 0.

This fixes the memory leakage by checking tf.ntevs == 0 in addition to
ret < 0.

Fixes: ff741783506c ("perf probe: Introduce debuginfo to encapsulate dwarf information")
Signed-off-by: Masami Hiramatsu 
Reviewed-by: Srikar Dronamraju 
Cc: Andi Kleen 
Cc: Oleg Nesterov 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf probe: Fix wrong variable warning when the probe point is not found

2020-08-21T11:07:29+00:00

commit 11fd3eb874e73ee8069bcfd54e3c16fa7ce56fe6 upstream.

Fix a wrong "variable not found" warning when the probe point is not
found in the debuginfo.

Since the debuginfo__find_probes() can return 0 even if it does not find
given probe point in the debuginfo, fill_empty_trace_arg() can be called
with tf.ntevs == 0 and it can emit a wrong warning.  To fix this, reject
ntevs == 0 in fill_empty_trace_arg().

E.g. without this patch;

  # perf probe -x /lib64/libc-2.30.so -a "memcpy arg1=%di"
  Failed to find the location of the '%di' variable at this address.
   Perhaps it has been optimized out.
   Use -V with the --range option to show '%di' location range.
  Added new events:
    probe_libc:memcpy    (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)
    probe_libc:memcpy    (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)

  You can now use it in all perf tools, such as:

  	perf record -e probe_libc:memcpy -aR sleep 1

With this;

  # perf probe -x /lib64/libc-2.30.so -a "memcpy arg1=%di"
  Added new events:
    probe_libc:memcpy    (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)
    probe_libc:memcpy    (on memcpy in /usr/lib64/libc-2.30.so with arg1=%di)

  You can now use it in all perf tools, such as:

  	perf record -e probe_libc:memcpy -aR sleep 1

Fixes: cb4027308570 ("perf probe: Trace a magic number if variable is not found")
Reported-by: Andi Kleen 
Signed-off-by: Masami Hiramatsu 
Reviewed-by: Srikar Dronamraju 
Tested-by: Andi Kleen 
Cc: Oleg Nesterov 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/159438667364.62703.2200642186798763202.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf tools: Fix record failure when mixed with ARM SPE event

2020-08-05T07:58:47+00:00

[ Upstream commit bd3c628f8fafa6cbd6a1ca440034b841f0080160 ]

When recording with cache-misses and arm_spe_x event, I found that it
will just fail without showing any error info if i put cache-misses
after 'arm_spe_x' event.

  [root@localhost 0620]# perf record -e cache-misses \
				-e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.067 MB perf.data ]
  [root@localhost 0620]#
  [root@localhost 0620]# perf record -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ \
				     -e  cache-misses sleep 1
  [root@localhost 0620]#

The current code can only work if the only event to be traced is an
'arm_spe_x', or if it is the last event to be specified. Otherwise the
last event type will be checked against all the arm_spe_pmus[i]->types,
none will match and an out of bound 'i' index will be used in
arm_spe_recording_init().

We don't support concurrent multiple arm_spe_x events currently, that
is checked in arm_spe_recording_options(), and it will show the relevant
info. So add the check and record of the first found 'arm_spe_pmu' to
fix this issue here.

Fixes: ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support")
Signed-off-by: Wei Li 
Reviewed-by: Mathieu Poirier 
Tested-by-by: Leo Yan 
Cc: Alexander Shishkin 
Cc: Hanjun Guo 
Cc: Jiri Olsa 
Cc: Kim Phillips 
Cc: Mark Rutland 
Cc: Mike Leach 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Cc: Suzuki Poulouse 
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200724071111.35593-2-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

s390/cpum_cf,perf: change DFLT_CCERROR counter name

2020-07-29T08:19:39+00:00

commit 3d3af181d370069861a3be94608464e2ff3682e2 upstream.

Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15.
This counter counts completed DEFLATE instructions with exit code
0, 1 or 2. Since exit code 0 means success and exit code 1 or 2
indicate errors, change the counter name to avoid confusion.
This counter is incremented each time the DEFLATE instruction
completed regardless if an error was detected or not.

Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15")
Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Thomas Richter 
Reviewed-by: Sumanth Korikkar 
Signed-off-by: Heiko Carstens 
Signed-off-by: Greg Kroah-Hartman

perf stat: Zero all the 'ena' and 'run' array slot stats for interval mode

2020-07-22T07:34:12+00:00

commit 0e0bf1ea1147fcf74eab19c2d3c853cc3740a72f upstream.

As the code comments in perf_stat_process_counter() say, we calculate
counter's data every interval, and the display code shows ps->res_stats
avg value. We need to zero the stats for interval mode.

But the current code only zeros the res_stats[0], it doesn't zero the
res_stats[1] and res_stats[2], which are for ena and run of counter.

This patch zeros the whole res_stats[] for interval mode.

Fixes: 51fd2df1e882 ("perf stat: Fix interval output values")
Signed-off-by: Jin Yao 
Cc: Alexander Shishkin 
Cc: Andi Kleen 
Cc: Jin Yao 
Cc: Jiri Olsa 
Cc: Kan Liang 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf scripts python: exported-sql-viewer.py: Fix time chart call tree

2020-07-16T06:13:35+00:00

commit f18d5cf86cdb58eb50cafb5a5e20943ec7a61b1f upstream.

Using Python version 3.8.2 and PySide2 version 5.14.0, time chart call tree
would not expand the tree to the result. Fix by using setExpanded().

Example:

  $ perf record -e intel_pt//u uname
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.034 MB perf.data ]
  $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
  2020-06-26 15:32:14.928997 Creating database ...
  2020-06-26 15:32:14.933971 Writing records...
  2020-06-26 15:32:15.535251 Adding indexes
  2020-06-26 15:32:15.542993 Dropping unused tables
  2020-06-26 15:32:15.549716 Done
  $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db

  Select: Charts -> Time chart by CPU
  Move mouse over middle of chart
  Right-click and select Show Call Tree

Before: displays Call Tree but not expanded to selected time
After: displays Call Tree expanded to selected time

Fixes: e69d5df75d74d ("perf scripts python: exported-sql-viewer.py: Add ability for Call tree to open at a specified task and time")
Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result

2020-07-16T06:13:35+00:00

commit 3a3cf7c570a486b07d9a6e68a77548aea6a8421f upstream.

Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find')
would not expand the tree to the result. Fix by using setExpanded().

Example:

  $ perf record -e intel_pt//u uname
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.034 MB perf.data ]
  $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
  2020-06-26 15:32:14.928997 Creating database ...
  2020-06-26 15:32:14.933971 Writing records...
  2020-06-26 15:32:15.535251 Adding indexes
  2020-06-26 15:32:15.542993 Dropping unused tables
  2020-06-26 15:32:15.549716 Done
  $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db

  Select: Reports -> Context-Sensitive Call Graph    or     Reports -> Call Tree
  Press: Ctrl-F
  Enter: main
  Press: Enter

Before: line showing 'main' does not display

After: tree is expanded to line showing 'main'

Fixes: ebd70c7dc2f5f ("perf scripts python: exported-sql-viewer.py: Add ability to find symbols in the call-graph")
Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman