linux-stable.git/tools/perf/util/stat.h, branch linux-5.4.y

perf stat: Reset previous counts on repeat with interval

2019-09-20T13:28:26+00:00

When using 'perf stat' with repeat and interval option, it shows wrong
values for events.

The wrong values will be shown for the first interval on the second and
subsequent repetitions.

Without the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.000282489                 53      faults
     2.000282489                513      sched:sched_switch
     4.005478208              3,721      faults
     4.005478208              2,666      sched:sched_switch
     5.025470933                395      faults
     5.025470933              1,307      sched:sched_switch
     2.009602825 1,84,46,74,40,73,70,95,47,520      faults 		<------
     2.009602825 1,84,46,74,40,73,70,95,49,568      sched:sched_switch  <------
     4.019612206              4,730      faults
     4.019612206              2,746      sched:sched_switch
     5.039615484              3,953      faults
     5.039615484              1,496      sched:sched_switch
     2.000274620 1,84,46,74,40,73,70,95,47,520      faults		<------
     2.000274620 1,84,46,74,40,73,70,95,47,520      sched:sched_switch	<------
     4.000480342              4,282      faults
     4.000480342              2,303      sched:sched_switch
     5.000916811              1,322      faults
     5.000916811              1,064      sched:sched_switch
  #

prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.

The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.

On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.

Hence there is a possibility of events showing up as big number.

Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.

With the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.019349347              2,597      faults
     2.019349347              2,753      sched:sched_switch
     4.019577372              3,098      faults
     4.019577372              2,532      sched:sched_switch
     5.019415481              1,879      faults
     5.019415481              1,356      sched:sched_switch
     2.000178813              8,468      faults
     2.000178813              2,254      sched:sched_switch
     4.000404621              7,440      faults
     4.000404621              1,266      sched:sched_switch
     5.040196079              2,458      faults
     5.040196079                556      sched:sched_switch
     2.000191939              6,870      faults
     2.000191939              1,170      sched:sched_switch
     4.000414103                541      faults
     4.000414103                902      sched:sched_switch
     5.000809863                450      faults
     5.000809863                364      sched:sched_switch
  #

Committer notes:

This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.

Fixes: 13370a9b5bb8 ("perf stat: Add interval printing")
Signed-off-by: Srikar Dronamraju 
Acked-by: Jiri Olsa 
Tested-by: Arnaldo Carvalho de Melo 
Tested-by: Ravi Bangoria 
Cc: Namhyung Kim 
Cc: Naveen N. Rao 
Cc: Stephane Eranian 
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Move perf_stat_synthesize_config() to event.h

2019-09-20T12:19:21+00:00

Together with the other synthsizers, and rename it to
perf_event__synthesize_stat_events().

This allows us to stop including event.h in util/stat.h.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-q5ebhrp44txboobs86htu5r9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf record: Move record_opts and other record decls out of perf.h

2019-08-26T14:58:22+00:00

And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Remove needless headers from stat.h

2019-08-26T11:36:25+00:00

Just a forward declaration for 'struct timespec' is needed, ditch the
rest.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-6shdqw801oqe7ax6r307k27r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

libperf: Adopt xyarray class from perf

2019-07-29T21:34:45+00:00

Move the xyarray class from perf to libperf, because it's going to be
used in both.

Signed-off-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Alexey Budankov 
Cc: Andi Kleen 
Cc: Michael Petlan 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20190721112506.12306-58-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Rename struct perf_evlist to struct evlist

2019-07-29T21:34:42+00:00

Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.

Committer notes:

Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)

Signed-off-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Alexey Budankov 
Cc: Andi Kleen 
Cc: Michael Petlan 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf evsel: Rename struct perf_evsel to struct evsel

2019-07-29T21:34:42+00:00

Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.

Committer notes:

Added fixes for arm64, provided by Jiri.

Signed-off-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Alexey Budankov 
Cc: Andi Kleen 
Cc: Michael Petlan 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf cpu_map: Rename struct cpu_map to struct perf_cpu_map

2019-07-29T21:34:42+00:00

Rename struct cpu_map to struct perf_cpu_map, so it could be part of
libperf.

Committer notes:

Added fixes for arm64, provided by Jiri.

Signed-off-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Alexey Budankov 
Cc: Andi Kleen 
Cc: Michael Petlan 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20190721112506.12306-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Support per-die aggregation

2019-06-10T19:19:59+00:00

It is useful to aggregate counts per die. E.g. Uncore becomes die-scope
on Xeon Cascade Lake-AP.

Introduce a new option "--per-die" to support per-die aggregation.

The global id for each core has been changed to socket + die id + core
id. The global id for each die is socket + die id.

Add die information for per-core aggregation. The output of per-core
aggregation will be changed from "S0-C0" to "S0-D0-C0". Any scripts
which rely on the output format of per-core aggregation probably be
broken.

For 'perf stat record/report', there is no die information when
processing the old perf.data. The per-die result will be the same as
per-socket.

Committer notes:

Renamed 'die' variable to 'die_id' to fix the build in some systems:

    CC       /tmp/build/perf/builtin-script.o
  cc1: warnings being treated as errors
  builtin-stat.c: In function 'perf_env__get_die':
  builtin-stat.c:963: error: declaration of 'die' shadows a global declaration
  util/util.h:19: error: shadowed declaration is here
  mv: cannot stat `/tmp/build/perf/.builtin-stat.o.tmp': No such file or directory

Signed-off-by: Kan Liang 
Reviewed-by: Jiri Olsa 
Cc: Andi Kleen 
Cc: Peter Zijlstra 
Link: https://lkml.kernel.org/n/tip-bsnhx7vgsuu6ei307mw60mbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove perf_tool from event_op2

2018-09-19T13:25:10+00:00

Now that we keep a perf_tool pointer inside perf_session, there's no
need to have a perf_tool argument in the event_op2 callback. Remove it.

Signed-off-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Alexey Budankov 
Cc: Andi Kleen 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20180913125450.21342-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo