linux-stable.git/tools/perf/util/stat.c, branch v5.7

perf stat: Use affinity for opening events

2019-11-29T15:20:45+00:00

Restructure the event opening in perf stat to cycle through the events
by CPU after setting affinity to that CPU.

This eliminates IPI overhead in the perf API.

We have to loop through the CPU in the outter builtin-stat code instead
of leaving that to low level functions.

It has to change the weak group fallback strategy slightly.  Since we
cannot easily undo the opens for other CPUs move the weak group retry to
a separate loop.

Before with a large test case with 94 CPUs:

  % time     seconds  usecs/call     calls    errors syscall
  ------ ----------- ----------- --------- --------- ----------------
   42.75    4.050910          67     60046       110 perf_event_open

After:

   26.86    0.944396          16     58069       110 perf_event_open

(the number changes slightly because the weak group retries
work differently and the test case relies on weak groups)

Committer notes:

Added one of the hunks in a patch provided by Andi after I noticed that
the "event times" 'perf test' entry was segfaulting.

Signed-off-by: Andi Kleen 
Acked-by: Jiri Olsa 
Link: http://lore.kernel.org/lkml/20191121001522.180827-10-andi@firstfloor.org
Link: http://lore.kernel.org/lkml/20191127232657.GL84886@tassilo.jf.intel.com # Fix
Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Add --per-node agregation support

2019-11-06T18:49:39+00:00

Adding new --per-node option to aggregate counts per NUMA
nodes for system-wide mode measurements.

You can specify --per-node in live mode:

  # perf stat  -a -I 1000 -e cycles --per-node
  #           time node   cpus             counts unit events
       1.000542550 N0       20          6,202,097      cycles
       1.000542550 N1       20            639,559      cycles
       2.002040063 N0       20          7,412,495      cycles
       2.002040063 N1       20          2,185,577      cycles
       3.003451699 N0       20          6,508,917      cycles
       3.003451699 N1       20            765,607      cycles
  ...

Or in the record/report stat session:

  # perf stat record -a -I 1000 -e cycles
  #           time             counts unit events
       1.000536937         10,008,468      cycles
       2.002090152          9,578,539      cycles
       3.003625233          7,647,869      cycles
       4.005135036          7,032,086      cycles
  ^C     4.340902364          3,923,893      cycles

  # perf stat report --per-node
  #           time node   cpus             counts unit events
       1.000536937 N0       20          9,355,086      cycles
       1.000536937 N1       20            653,382      cycles
       2.002090152 N0       20          7,712,838      cycles
       2.002090152 N1       20          1,865,701      cycles
       3.003625233 N0       20          6,604,441      cycles
       3.003625233 N1       20          1,043,428      cycles
       4.005135036 N0       20          6,350,522      cycles
       4.005135036 N1       20            681,564      cycles
       4.340902364 N0       20          3,403,188      cycles
       4.340902364 N1       20            520,705      cycles

Signed-off-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Alexey Budankov 
Cc: Andi Kleen 
Cc: Joe Mario 
Cc: Kan Liang 
Cc: Michael Petlan 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/20190904073415.723-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Support --all-kernel/--all-user

2019-10-15T11:39:42+00:00

'perf record' has supported --all-kernel / --all-user to configure all
used events to run in kernel space or run in user space. But 'perf stat'
doesn't support these options.

It would be useful to support these options in 'perf stat' too to keep
the same semantics available in both tools.

Signed-off-by: Jin Yao 
Acked-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Andi Kleen 
Cc: Kan Liang 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/20191011050545.3899-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo

libperf: Move 'system_wide' from 'struct evsel' to 'struct perf_evsel'

2019-09-25T12:51:46+00:00

Move the 'system_wide 'member from perf's evsel to libperf's perf_evsel.

Committer notes:

Added stdbool.h as we now use bool here.

Signed-off-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Michael Petlan 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/20190913132355.21634-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Reset previous counts on repeat with interval

2019-09-20T13:28:26+00:00

When using 'perf stat' with repeat and interval option, it shows wrong
values for events.

The wrong values will be shown for the first interval on the second and
subsequent repetitions.

Without the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.000282489                 53      faults
     2.000282489                513      sched:sched_switch
     4.005478208              3,721      faults
     4.005478208              2,666      sched:sched_switch
     5.025470933                395      faults
     5.025470933              1,307      sched:sched_switch
     2.009602825 1,84,46,74,40,73,70,95,47,520      faults 		<------
     2.009602825 1,84,46,74,40,73,70,95,49,568      sched:sched_switch  <------
     4.019612206              4,730      faults
     4.019612206              2,746      sched:sched_switch
     5.039615484              3,953      faults
     5.039615484              1,496      sched:sched_switch
     2.000274620 1,84,46,74,40,73,70,95,47,520      faults		<------
     2.000274620 1,84,46,74,40,73,70,95,47,520      sched:sched_switch	<------
     4.000480342              4,282      faults
     4.000480342              2,303      sched:sched_switch
     5.000916811              1,322      faults
     5.000916811              1,064      sched:sched_switch
  #

prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.

The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.

On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.

Hence there is a possibility of events showing up as big number.

Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.

With the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.019349347              2,597      faults
     2.019349347              2,753      sched:sched_switch
     4.019577372              3,098      faults
     4.019577372              2,532      sched:sched_switch
     5.019415481              1,879      faults
     5.019415481              1,356      sched:sched_switch
     2.000178813              8,468      faults
     2.000178813              2,254      sched:sched_switch
     4.000404621              7,440      faults
     4.000404621              1,266      sched:sched_switch
     5.040196079              2,458      faults
     5.040196079                556      sched:sched_switch
     2.000191939              6,870      faults
     2.000191939              1,170      sched:sched_switch
     4.000414103                541      faults
     4.000414103                902      sched:sched_switch
     5.000809863                450      faults
     5.000809863                364      sched:sched_switch
  #

Committer notes:

This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.

Fixes: 13370a9b5bb8 ("perf stat: Add interval printing")
Signed-off-by: Srikar Dronamraju 
Acked-by: Jiri Olsa 
Tested-by: Arnaldo Carvalho de Melo 
Tested-by: Ravi Bangoria 
Cc: Namhyung Kim 
Cc: Naveen N. Rao 
Cc: Stephane Eranian 
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Move event synthesizing routines to separate .c file

2019-09-20T13:28:21+00:00

For better grouping, in time we may end up making most of these static,
i.e. generalizing the 'perf record' synthesizing code so that based on
the target it can do the right thing and call the needed synthesizers.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-s9zxxhk40s95pjng9panet16@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Move event synthesizing routines to separate header

2019-09-20T12:19:22+00:00

Those are the only routines using the perf_event__handler_t typedef and
are all related, so move to a separate header to reduce the header
dependency tree, lots of places were getting event.h and even stdio.h,
limits.h indirectly, so fix those as well.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-yvx9u1mf7baq6cu1abfhbqgs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf stat: Move perf_stat_synthesize_config() to event.h

2019-09-20T12:19:21+00:00

Together with the other synthsizers, and rename it to
perf_event__synthesize_stat_events().

This allows us to stop including event.h in util/stat.h.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-q5ebhrp44txboobs86htu5r9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf env: Remove needless cpumap.h header

2019-09-20T12:19:21+00:00

Only a 'struct perf_cmp_map' forward allocation is necessary, fix the
places that need the header but were getting it indirectly, by luck,
from env.h.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-3sj3n534zghxhk7ygzeaqlx9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf auxtrace: Uninline functions that touch perf_session

2019-09-01T01:24:10+00:00

So that we don't carry the session.h include directive in auxtrace.h,
which in turn opens a can of worms of files that were getting all sorts
of things via that include, fix them all.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-d2d83aovpgri2z75wlitquni@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo