linux-stable.git/tools/perf/util/intel-pt-decoder, branch v5.11

perf intel-pt: Add support for decoding PSB+ only

2020-08-06T12:02:43+00:00

A single q option decodes ip from only FUP/TIP packets. Make it so that
repeating the q option (i.e. qq) decodes only PSB+, getting ip if there
is a FUP packet within PSB+ (i.e. between PSB and PSBEND).

Example:

 $ perf record -e intel_pt//u grep -rI pudding drivers
 [ perf record: Woken up 52 times to write data ]
 [ perf record: Captured and wrote 57.870 MB perf.data ]
 $ time perf script --itrace=bi | wc -l
 58948289

 real    1m23.863s
 user    1m23.251s
 sys     0m7.452s
 $ time perf script --itrace=biq | wc -l
 3385694

 real    0m4.453s
 user    0m4.455s
 sys     0m0.328s
 $ time perf script --itrace=biqq | wc -l
 1883

 real    0m0.047s
 user    0m0.043s
 sys     0m0.009s

Signed-off-by: Adrian Hunter 
Reviewed-by: Andi Kleen 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Link: http://lore.kernel.org/lkml/20200710151104.15137-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Add support for decoding FUP/TIP only

2020-08-06T12:02:14+00:00

Use the new itrace 'q' option to add support for a mode of decoding that
ignores TNT, does not walk object code, but gets the ip from FUP and TIP
packets.

Example:

 $ perf record -e intel_pt//u grep -rI pudding drivers
 [ perf record: Woken up 52 times to write data ]
 [ perf record: Captured and wrote 57.870 MB perf.data ]
 $ time perf script --itrace=bi | wc -l
 58948289

 real    1m23.863s
 user    1m23.251s
 sys     0m7.452s
 $ time perf script --itrace=biq | wc -l
 3385694

 real    0m4.453s
 user    0m4.455s
 sys     0m0.328s

Signed-off-by: Adrian Hunter 
Reviewed-by: Andi Kleen 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Link: http://lore.kernel.org/lkml/20200710151104.15137-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Fix duplicate branch after CBR

2020-08-06T11:18:32+00:00

CBR events can result in a duplicate branch event, because the state
type defaults to a branch. Fix by clearing the state type.

Example: trace 'sleep' and hope for a frequency change

 Before:

   $ perf record -e intel_pt//u sleep 0.1
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.034 MB perf.data ]
   $ perf script --itrace=bpe > before.txt

 After:

   $ perf script --itrace=bpe > after.txt
   $ diff -u before.txt after.txt
   --- before.txt  2020-07-07 14:42:18.191508098 +0300
   +++ after.txt   2020-07-07 14:42:36.587891753 +0300
   @@ -29673,7 +29673,6 @@
               sleep 93431 [007] 15411.619905:          1  branches:u:                 0 [unknown] ([unknown]) =>     7f0818abb2e0 clock_nanosleep@@GLIBC_2.17+0x0 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.619905:          1  branches:u:      7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>                0 [unknown] ([unknown])
               sleep 93431 [007] 15411.720069:         cbr:  cbr: 15 freq: 1507 MHz ( 56%)         7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
   -           sleep 93431 [007] 15411.720069:          1  branches:u:      7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>                0 [unknown] ([unknown])
               sleep 93431 [007] 15411.720076:          1  branches:u:                 0 [unknown] ([unknown]) =>     7f0818abb30e clock_nanosleep@@GLIBC_2.17+0x2e (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.720077:          1  branches:u:      7f0818abb323 clock_nanosleep@@GLIBC_2.17+0x43 (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>     7f0818ac0eb7 __nanosleep+0x17 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.720077:          1  branches:u:      7f0818ac0ebf __nanosleep+0x1f (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>     55cb7e4c2827 rpl_nanosleep+0x97 (/usr/bin/sleep)

Fixes: 91de8684f1cff ("perf intel-pt: Cater for CBR change in PSB+")
Fixes: abe5a1d3e4bee ("perf intel-pt: Decoder to output CBR changes immediately")
Signed-off-by: Adrian Hunter 
Reviewed-by: Andi Kleen 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Fix FUP packet state

2020-08-06T11:17:24+00:00

While walking code towards a FUP ip, the packet state is
INTEL_PT_STATE_FUP or INTEL_PT_STATE_FUP_NO_TIP. That was mishandled
resulting in the state becoming INTEL_PT_STATE_IN_SYNC prematurely.  The
result was an occasional lost EXSTOP event.

Signed-off-by: Adrian Hunter 
Reviewed-by: Andi Kleen 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove unneeded semicolons

2020-04-30T13:48:32+00:00

Fixes coccicheck warnings:

  tools/perf/builtin-diff.c:1565:2-3: Unneeded semicolon
  tools/perf/builtin-lock.c:778:2-3: Unneeded semicolon
  tools/perf/builtin-mem.c:126:2-3: Unneeded semicolon
  tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c:555:2-3: Unneeded semicolon
  tools/perf/util/ordered-events.c:317:2-3: Unneeded semicolon
  tools/perf/util/synthetic-events.c:1131:2-3: Unneeded semicolon
  tools/perf/util/trace-event-read.c:78:2-3: Unneeded semicolon

Reported-by: Hulk Robot 
Signed-off-by: Zou Wei 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Mark Rutland 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/1588065523-71423-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Use shared x86 insn decoder

2019-09-01T01:27:52+00:00

Now that there's a common version of the decoder for all tools, use it
instead of the local copy.

Also use perf's check-headers.sh script to diff the decoder files to
make sure they remain in sync with the kernel version.  Objtool has a
similar check.

Committer notes:

Had to keep this all pointing explicitely to x86 headers/files, i.e.
instead of asm/isnn.h we had to use ../include/asm/insn.h when the files
were in differemt dirs, or just replace "" with "foo.h".

This way we continue to be able to process perf.data files with Intel PT
traces in distros other than x86.

Also fixed up the awk script paths to use $(srcdir)/tools/arch instead
or relative directories so that we keep detached tarballs (make help |
grep perf) working.

For now the include lines in these headers are being ignored so as not
to flag false reports of kernel/tools out of sync.

Signed-off-by: Josh Poimboeuf 
Reviewed-by: Masami Hiramatsu 
Acked-by: Peter Zijlstra (Intel) 
Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/8a37e615d2880f039505d693d1e068a009358a2b.1567118001.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Remove inat.c from build dependency list

2019-09-01T01:27:52+00:00

intel-pt-insn-decoder.c includes inat.c directly, so it already has an
implicit dependency on inat.c.  The Build file dependency is redundant.

Signed-off-by: Josh Poimboeuf 
Reviewed-by: Masami Hiramatsu 
Acked-by: Peter Zijlstra 
Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/53776d6d29bc9eceb571d52df8fa32250c58a0f3.1567118001.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove needless evlist.h include directives

2019-09-01T01:24:10+00:00

Remove the last unneeded use of cache.h in a header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.

This is an old file, used by now incorrectly in many places, so it was
providing includes needed indirectly, fixup this fallout.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-3x3l8gihoaeh7714os861ia7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

tools lib: Adopt zalloc()/zfree() from tools/perf

2019-07-09T13:13:26+00:00

Eroding a bit more the tools/perf/util/util.h hodpodge header.

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Add CBR value to decoder state

2019-06-25T11:47:10+00:00

For convenience, add the core-to-bus ratio (CBR) value to the decoder
state.

Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Link: http://lkml.kernel.org/r/20190622093248.581-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo