linux-stable.git/tools/perf/util/annotate.c, branch v3.5

perf annotate: Introduce ->free() method in ins_ops

2012-05-12T16:26:20+00:00

So that we don't special case disasm_line__free, allowing each
instruction class to provide an specialized destructor, like is needed
for 'lock'.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-xxw4vs5n077tf35jsvjzylhb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Augment lock instruction output

2012-05-12T16:15:34+00:00

It just chops off the 'lock' and uses the ins__find, etc machinery to
call instruction specific parsers/beautifiers.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-4913ba2dzakz5rivgumosqbh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Resolve symbols using objdump comment for single op ins

2012-05-11T20:21:09+00:00

Starting with inc, incl, dec, decl.

Requested-by: Linus Torvalds 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-jvh0jspefr5jyn0l7qko12st@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Resolve symbols using objdump comment

2012-05-11T20:19:20+00:00

This:

     mov    0x95bbb6(%rip),%ecx        # ffffffff81ae8d04 

Becomes:

     mov    d_hash_shift,%ecx

Ditto for many more instructions that take two operands.

Requested-by: Linus Torvalds 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-i5opbyai2x6mn9e5yjmhx9k6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Use raw form for register indirect call instructions

2012-05-11T15:28:55+00:00

   callq  *0x10(%rax)

was being rendered in simplified mode as:

   callq  *10

I.e. hexa, but without the 0x and omitting the register. In such cases
just use the raw form.

Reported-by: Linus Torvalds 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-m91tv004h2m1fkfgu6ovx3hb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate browser: Compact 'nop' output

2012-05-07T22:00:42+00:00

Just suppress the nop operands, future infrastructure that will record
the instruction lenght (and its contents) in struct ins will allow
rendering them as nopN, i.e. nop5 for a 5-byte nop.

Suggested-by: Linus Torvalds 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-qddbeglfzqdlal8vj2yaj67y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate browser: Do raw printing in 'o'ffset in a single place

2012-05-07T21:54:16+00:00

Instead of doing the same in all ins scnprintf methods.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-8mfairi2n1nentoa852alazv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Mark jump instructions with no offset

2012-04-25T17:16:03+00:00

I.e. jumps that go to code outside the current function, that is denoted
in objdump -dS as:

   399f877a9f: jne    399f87bcf4 <_L_lock_5154>

I.e. without the + after the name of the current function, like in:

   399f877aa5: jmp    399f877ab2 <_int_free+0x412>

The browser will use that info to avoid drawing connectors to the start
of the function, since ops.target.addr was zero.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-xrn35g2mlawz1ydo1p73w3q6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Disambiguage offsets and addresses in operands

2012-04-25T11:00:23+00:00

We were using ins_ops->target for callq addresses and jump offsets,
disambiguate by having ins_ops->target.addr and ins_ops->target.offset.

For jumps we'll need both to fixup lines that don't have an offset on
the <> part.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-3nlcmstua75u07ao7wja1rwx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate browser: Suppress the callq address

2012-04-20T18:26:47+00:00

    0.00 |       callq  ffffffff8112f190 <__mod_zone_page_state>

Becomes:

    0.00 |       callq  __mod_zone_page_state

But if you press 'o' it gets verbose, i.e. as in objdump -dS:

    0.00 | ffffffff8116bdda:  callq  ffffffff8112f190 <__mod_zone_page_state>

Requested-by: Linus Torvalds 
Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-bwse2wib954y0db7dq91bes5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo