linux-stable.git/tools/perf/builtin-annotate.c, branch linux-3.7.y

perf tools: Use __maybe_used for unused variables

2012-09-11T15:19:15+00:00

perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored

__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.

The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.

Signed-off-by: Irina Tirdea 
Acked-by: Pekka Enberg 
Cc: David Ahern 
Cc: Ingo Molnar 
Cc: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Steven Rostedt 
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05 in builtin-sched.c ]
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Allow user to indicate path to objdump in command line

2012-09-05T22:41:55+00:00

When analyzing perf data from hosts of other architecture than one of
the local host it's useful to call objdump that is part of a toolchain
for that architecture. Instead of calling regular objdump, call one that
user specified in command line.

Signed-off-by: Maciek Borzecki 
Acked-by: David Ahern 
Link: http://lkml.kernel.org/r/1346754750.16299.3.camel@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Convert critical messages to ui__error()

2012-05-29T14:53:42+00:00

There were places where use ui__warning (or even fprintf) to show
critical messages. This patch converts them to ui__error so that the
front-end code can implement appropriate behavior.

Signed-off-by: Namhyung Kim 
Cc: Paul Mackerras 
Cc: Pekka Enberg 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1338265382-6872-3-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Get rid of field_sep check

2012-01-08T15:29:34+00:00

The 'field_sep' variable is not set anywhere. Just remove the
conditional.

Cc: Ingo Molnar 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1325957132-10600-7-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim 
Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Fix usage string

2012-01-08T15:28:48+00:00

The annotate command doesn't take non-option arguments.

In fact, it can take last argument as a symbol filter though, but that's
a special case and, IMHO, it should be discouraged in favor of the -s
option.

Cc: Ingo Molnar 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1325957132-10600-6-git-send-email-namhyung@gmail.com
Signed-off-by: Namhyung Kim 
Signed-off-by: Arnaldo Carvalho de Melo

perf report: Accept fifos as input file

2011-12-23T19:01:03+00:00

The default input file for perf report is not handled the same way as
perf record does it for its output file. This leads to unexpected
behavior of perf report, etc. E.g.:

 # perf record -a -e cpu-cycles sleep 2 | perf report | cat
 failed to open perf.data: No such file or directory  (try 'perf record' first)

While perf record writes to a fifo, perf report expects perf.data to be
read. This patch changes this to accept fifos as input file.

Applies to the following commands:

 perf annotate
 perf buildid-list
 perf evlist
 perf kmem
 perf lock
 perf report
 perf sched
 perf script
 perf timechart

Also fixes char const* -> const char* type declaration for filename
strings.

v2:
* Prevent potential null pointer access to input_name in
  builtin-report.c. Needed due to removal of patch "perf report: Setup
  browser if stdout is a pipe"

Cc: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter 
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: make -C consistent across commands (for cpu list arg)

2011-11-28T13:45:53+00:00

Currently the meaning of -C varies by perf command: for perf-top,
perf-stat, perf-record it means cpu list. For perf-report it means comm
list. Then perf-annotate, perf-report and perf-script use -c for cpu
list.

Fix annotate, report and script to use -C for cpu list to be consistent
with top, stat and record. This means report needs to use -c for comm
list which does introduce a backward compatibility change.

v1 -> v2
- update perf-script.txt too

Cc: Frederic Weisbecker 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1321209008-7004-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern 
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Rename perf_event_ops to perf_tool

2011-11-28T12:39:28+00:00

To better reflect that it became the base class for all tools, that must
be in each tool struct and where common stuff will be put.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-qgpc4msetqlwr8y2k7537cxe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Resolve machine earlier and pass it to perf_event_ops

2011-11-28T12:39:12+00:00

Reducing the exposure of perf_session further, so that we can use the
classes in cases where no perf.data file is created.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Pass tool context in the the perf_event_ops functions

2011-11-28T12:38:56+00:00

So that we don't need to have that many globals.

Next steps will remove the 'session' pointer, that in most cases is
not needed.

Then we can rename perf_event_ops to 'perf_tool' that better describes
this class hierarchy.

Cc: David Ahern 
Cc: Frederic Weisbecker 
Cc: Mike Galbraith 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/n/tip-wp4djox7x6w1i2bab1pt4xxp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo