linux-stable.git/tools/perf/arch, branch v5.12.2

perf cs-etm: Fix bitmap for option

2021-03-06T19:54:33+00:00

When set option with macros ETM_OPT_CTXTID and ETM_OPT_TS, it wrongly
takes these two values (14 and 28 prespectively) as bit masks, but
actually both are the offset for bits.  But this doesn't lead to
further failure due to the AND logic operation will be always true for
ETM_OPT_CTXTID / ETM_OPT_TS.

This patch defines new independent macros (rather than using the
"config" bits) for requesting the "contextid" and "timestamp" for
cs_etm_set_option().

Signed-off-by: Suzuki Poulouse 
Reviewed-by: Mike Leach 
Cc: Al Grant 
Cc: Daniel Kiss 
Cc: Denis Nikitin 
Cc: Jiri Olsa 
Cc: John Garry 
Cc: Jonathan Corbet 
Cc: Leo Yan 
Cc: Mark Rutland 
Cc: Mathieu Poirier 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Cc: Suzuki Poulouse 
Cc: Will Deacon 
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210206150833.42120-5-leo.yan@linaro.org
[ Extract the change as a separate patch for easier review ]
Signed-off-by: Leo Yan 
Signed-off-by: Arnaldo Carvalho de Melo

perf tests x86: Move insn.h include to make sure it finds stddef.h

2021-03-06T19:54:32+00:00

In some versions of alpine Linux the perf build is broken since commit
1d509f2a6ebca1ae ("x86/insn: Support big endian cross-compiles"):

  In file included from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/asm/byteorder.h:5,
                   from arch/x86/util/../../../../arch/x86/include/asm/insn.h:10,
                   from arch/x86/util/archinsn.c:2:
  /usr/include/linux/swab.h:161:8: error: unknown type name '__always_inline'
   static __always_inline __u16 __swab16p(const __u16 *p)

So move the inclusion of arch/x86/include/asm/insn.h to later in the
places where linux/stddef.h (that conditionally defines
__always_inline) to workaround this problem on Alpine Linux 3.9 to 3.11,
3.12 onwards works.

Cc: Josh Poimboeuf 
Cc: Martin Schwidefsky 
Signed-off-by: Arnaldo Carvalho de Melo

perf test: Support the ins_lat check in the X86 specific test

2021-03-06T19:54:32+00:00

The ins_lat of PERF_SAMPLE_WEIGHT_STRUCT stands for the instruction
latency, which is only available for X86. Add a X86 specific test for
the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT type.

The test__x86_sample_parsing() uses the same way as the
test__sample_parsing() to verify a sample type. Since the ins_lat and
PERF_SAMPLE_WEIGHT_STRUCT are the only X86 specific sample type for now,
the test__x86_sample_parsing() only verify the PERF_SAMPLE_WEIGHT_STRUCT
type. Other sample types are still verified in the generic test.

  $ perf test 77 -v
  77: x86 Sample parsing                                              :
  --- start ---
  test child forked, pid 102370
  test child finished with 0
  ---- end ----
  x86 Sample parsing: Ok

Signed-off-by: Kan Liang 
Cc: Athira Jajeev 
Cc: Heiko Carstens 
Cc: Sumanth Korikkar 
Cc: Sven Schnelle 
Cc: Thomas Richter 
Cc: Vasily Gorbik 
Link: http://lore.kernel.org/lkml/1614787285-104151-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo

tools headers: Update syscall.tbl files to support mount_setattr

2021-03-06T19:54:30+00:00

To pick the changes from:

  9caccd41541a6f7d ("fs: introduce MOUNT_ATTR_IDMAP")

This adds this new syscall to the tables used by tools such as 'perf
trace', so that one can specify it by name and have it filtered, etc.

Addressing these perf build warnings:

  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl

Cc: Adrian Hunter 
Cc: Christian Brauner 
Cc: Ian Rogers 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: http://lore.kernel.org/lkml/YD6Wsxr9ByUbab/a@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Clean 'generated' directory used for creating the syscall table on x86

2021-03-06T19:54:25+00:00

Remove generated directory tools/perf/arch/x86/include/generated.

Signed-off-by: Andreas Wendleder 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Mark Rutland 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/20210301185642.163396-1-gonsolo@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo

perf arch powerpc: Sync powerpc syscall.tbl with the kernel sources

2021-03-06T19:54:23+00:00

To get the changes in:

  fbcee2ebe8edbb6a ("powerpc/32: Always save non volatile GPRs at syscall entry")

That shouldn't cause any change in tooling, just silences the following
tools/perf/ build warning:

  Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'

Cc: Christophe Leroy 
Cc: Michael Ellerman 
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Fix arm64 build error with gcc-11

2021-02-18T19:24:43+00:00

gcc version: 11.0.0 20210208 (experimental) (GCC)

Following build error on arm64:

.......
In function ‘printf’,
    inlined from ‘regs_dump__printf’ at util/session.c:1141:3,
    inlined from ‘regs__printf’ at util/session.c:1169:2:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:107:10: \
  error: ‘%-5s’ directive argument is null [-Werror=format-overflow=]

107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, \
                __va_arg_pack ());

......
In function ‘fprintf’,
  inlined from ‘perf_sample__fprintf_regs.isra’ at \
    builtin-script.c:622:14:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:100:10: \
    error: ‘%5s’ directive argument is null [-Werror=format-overflow=]
  100 |   return __fprintf_chk (__stream, __USE_FORTIFY_LEVEL - 1, __fmt,
  101 |                         __va_arg_pack ());

cc1: all warnings being treated as errors
.......

This patch fixes Wformat-overflow warnings. Add helper function to
convert NULL to "unknown".

Signed-off-by: Jianlin Lv 
Reviewed-by: John Garry 
Acked-by: Jiri Olsa 
Cc: Albert Ou 
Cc: Alexander Shishkin 
Cc: Anju T Sudhakar 
Cc: Athira Jajeev 
Cc: Guo Ren 
Cc: Kajol Jain 
Cc: Leo Yan 
Cc: Mark Rutland 
Cc: Mathieu Poirier 
Cc: Namhyung Kim 
Cc: Paul Walmsley 
Cc: Peter Zijlstra 
Cc: Ravi Bangoria 
Cc: Will Deacon 
Cc: Palmer Dabbelt 
Cc: iecedge@gmail.com
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210218031245.2078492-1-Jianlin.Lv@arm.com
Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Retain the last PIP packet payload as is

2021-02-18T19:13:46+00:00

Retain the PIP packet payload as is, instead of just the CR3, because it
contains also the VMX NR flag which is needed to track VM-Entry.

Signed-off-by: Adrian Hunter 
Acked-by: Andi Kleen 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Link: https://lore.kernel.org/r/20210218095801.19576-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo

perf intel_pt: Add vmlaunch and vmresume as branches

2021-02-18T19:13:30+00:00

In preparation to support Intel PT decoding of virtual machine traces, add
vmlaunch and vmresume as branch instructions.

Note, sample flags will show "VMentry" even if the VM-Entry fails.

Signed-off-by: Adrian Hunter 
Acked-by: Andi Kleen 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Link: https://lore.kernel.org/r/20210218095801.19576-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing

2021-02-18T19:07:06+00:00

For X86, the var2_w field of PERF_SAMPLE_WEIGHT_STRUCT stands for the
instruction latency. Current perf forces the var2_w to the data->ins_lat
in the generic code. It works well for now because X86 is the only
architecture that supports the PERF_SAMPLE_WEIGHT_STRUCT, but it may
bring problems once other architectures support the sample type.  For
example, the var2_w may be used to capture something else on PowerPC.

Create two architecture specific functions to parse and synthesize the
weight related samples. Move the X86 specific codes to the X86 version
functions. Other architectures can implement their own functions later
separately.

Signed-off-by: Kan Liang 
Cc: Andi Kleen 
Cc: Athira Jajeev 
Cc: Jin Yao 
Cc: Jiri Olsa 
Cc: Madhavan Srinivasan 
Cc: Namhyung Kim 
Link: http://lore.kernel.org/lkml/1612540912-6562-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo