linux-stable.git/tools/objtool/check.c, branch v4.19.136 Linux kernel stable tree objtool: Ignore empty alternatives 2020-06-22T07:05:09+00:00 Julien Thierry jthierry@redhat.com 2020-03-27T15:28:41+00:00 b34bdf1148731cd258192cd6a6ed6014fcd627e4 [ Upstream commit 7170cf47d16f1ba29eca07fd818870b7af0a93a5 ] The .alternatives section can contain entries with no original instructions. Objtool will currently crash when handling such an entry. Just skip that entry, but still give a warning to discourage useless entries. Signed-off-by: Julien Thierry <jthierry@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7170cf47d16f1ba29eca07fd818870b7af0a93a5 ]

The .alternatives section can contain entries with no original
instructions. Objtool will currently crash when handling such an entry.

Just skip that entry, but still give a warning to discourage useless
entries.

Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
objtool: Fix stack offset tracking for indirect CFAs 2020-05-14T05:57:23+00:00 Josh Poimboeuf jpoimboe@redhat.com 2020-04-25T10:03:00+00:00 9fbfc77d0f5e04a7434fa6d32112036e2a41bc6e commit d8dd25a461e4eec7190cb9d66616aceacc5110ad upstream. When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Dave Jones <dsj@fb.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d8dd25a461e4eec7190cb9d66616aceacc5110ad upstream.

When the current frame address (CFA) is stored on the stack (i.e.,
cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack
offset when there are subsequent pushes or pops.  This results in bad
ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the
previous stack pointer on the stack and does a subsequent push.

This fixes the following unwinder warning:

  WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0

Fixes: 627fce14809b ("objtool: Add ORC unwind table generation")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Dave Jones <dsj@fb.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings 2020-05-02T15:25:57+00:00 Josh Poimboeuf jpoimboe@redhat.com 2020-04-01T18:23:25+00:00 9a80ebc2d32e70843b3430808511d62fb04cf869 [ Upstream commit bd841d6154f5f41f8a32d3c1b0bc229e326e640a ] CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bd841d6154f5f41f8a32d3c1b0bc229e326e640a ]

CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an
unreachable code path.  This includes __builtin_unreachable().  Because
the BUG() macro uses __builtin_unreachable() after it emits its own UD2,
this results in a double UD2.  In this case objtool rightfully detects
that the second UD2 is unreachable:

  init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction

We weren't able to figure out a way to get rid of the double UD2s, so
just silence the warning.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
objtool: Fix switch table detection in .text.unlikely 2020-04-23T08:30:11+00:00 Josh Poimboeuf jpoimboe@redhat.com 2020-04-01T18:23:28+00:00 2b91a2361d7709ba6c1958ba0b0207f2a3e7cfdc commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream.

If a switch jump table's indirect branch is in a ".cold" subfunction in
.text.unlikely, objtool doesn't detect it, and instead prints a false
warning:

  drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame
  drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame
  drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame

Fix it by comparing the function, instead of the section and offset.

Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Support per-function rodata sections 2019-06-25T03:35:52+00:00 Allan Xavier allan.x.xavier@oracle.com 2018-09-07T13:12:01+00:00 6a997c3a239ab7adda6a74196b4b8f5e333465e6 commit 4a60aa05a0634241ce17f957bf9fb5ac1eed6576 upstream. Add support for processing switch jump tables in objects with multiple .rodata sections, such as those created by '-ffunction-sections' and '-fdata-sections'. Currently, objtool always looks in .rodata for jump table information, which results in many "sibling call from callable instruction with modified stack frame" warnings with objects compiled using those flags. The fix is comprised of three parts: 1. Flagging all .rodata sections when importing ELF information for easier checking later. 2. Keeping a reference to the section each relocation is from in order to get the list_head for the other relocations in that section. 3. Finding jump tables by following relocations to .rodata sections, rather than always referencing a single global .rodata section. The patch has been tested without data sections enabled and no differences in the resulting orc unwind information were seen. Note that as objtool adds terminators to end of each .text section the unwind information generated between a function+data sections build and a normal build aren't directly comparable. Manual inspection suggests that objtool is now generating the correct information, or at least making more of an effort to do so than it did previously. Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/099bdc375195c490dda04db777ee0b95d566ded1.1536325914.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4a60aa05a0634241ce17f957bf9fb5ac1eed6576 upstream.

Add support for processing switch jump tables in objects with multiple
.rodata sections, such as those created by '-ffunction-sections' and
'-fdata-sections'.  Currently, objtool always looks in .rodata for jump
table information, which results in many "sibling call from callable
instruction with modified stack frame" warnings with objects compiled
using those flags.

The fix is comprised of three parts:

1. Flagging all .rodata sections when importing ELF information for
   easier checking later.

2. Keeping a reference to the section each relocation is from in order
   to get the list_head for the other relocations in that section.

3. Finding jump tables by following relocations to .rodata sections,
   rather than always referencing a single global .rodata section.

The patch has been tested without data sections enabled and no
differences in the resulting orc unwind information were seen.

Note that as objtool adds terminators to end of each .text section the
unwind information generated between a function+data sections build and
a normal build aren't directly comparable. Manual inspection suggests
that objtool is now generating the correct information, or at least
making more of an effort to do so than it did previously.

Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/099bdc375195c490dda04db777ee0b95d566ded1.1536325914.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Don't use ignore flag for fake jumps 2019-06-15T09:54:03+00:00 Josh Poimboeuf jpoimboe@redhat.com 2019-05-13T17:01:31+00:00 20e1a16702d988a609d8f0122f7f294031169e9c [ Upstream commit e6da9567959e164f82bc81967e0d5b10dee870b4 ] The ignore flag is set on fake jumps in order to keep add_jump_destinations() from setting their jump_dest, since it already got set when the fake jump was created. But using the ignore flag is a bit of a hack. It's normally used to skip validation of an instruction, which doesn't really make sense for fake jumps. Also, after the next patch, using the ignore flag for fake jumps can trigger a false "why am I validating an ignored function?" warning. Instead just add an explicit check in add_jump_destinations() to skip fake jumps. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e6da9567959e164f82bc81967e0d5b10dee870b4 ]

The ignore flag is set on fake jumps in order to keep
add_jump_destinations() from setting their jump_dest, since it already
got set when the fake jump was created.

But using the ignore flag is a bit of a hack.  It's normally used to
skip validation of an instruction, which doesn't really make sense for
fake jumps.

Also, after the next patch, using the ignore flag for fake jumps can
trigger a false "why am I validating an ignored function?" warning.

Instead just add an explicit check in add_jump_destinations() to skip
fake jumps.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
objtool: Fix function fallthrough detection 2019-05-22T05:37:35+00:00 Josh Poimboeuf jpoimboe@redhat.com 2019-05-13T17:01:32+00:00 7b72ca6312abfd2b61aea45ad9f0d2c45bf2a4e9 commit e6f393bc939d566ce3def71232d8013de9aaadde upstream. When a function falls through to the next function due to a compiler bug, objtool prints some obscure warnings. For example: drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x95: return with modified stack frame drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x0: stack state mismatch: cfa1=7+32 cfa2=7+8 Instead it should be printing: drivers/regulator/core.o: warning: objtool: regulator_supply_is_couple() falls through to next function regulator_count_voltages() This used to work, but was broken by the following commit: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") The padding nops at the end of a function aren't actually part of the function, as defined by the symbol table. So the 'func' variable in validate_branch() is getting cleared to NULL when a padding nop is encountered, breaking the fallthrough detection. If the current instruction doesn't have a function associated with it, just consider it to be part of the previously detected function by not overwriting the previous value of 'func'. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/546d143820cd08a46624ae8440d093dd6c902cae.1557766718.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e6f393bc939d566ce3def71232d8013de9aaadde upstream.

When a function falls through to the next function due to a compiler
bug, objtool prints some obscure warnings.  For example:

  drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x95: return with modified stack frame
  drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x0: stack state mismatch: cfa1=7+32 cfa2=7+8

Instead it should be printing:

  drivers/regulator/core.o: warning: objtool: regulator_supply_is_couple() falls through to next function regulator_count_voltages()

This used to work, but was broken by the following commit:

  13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")

The padding nops at the end of a function aren't actually part of the
function, as defined by the symbol table.  So the 'func' variable in
validate_branch() is getting cleared to NULL when a padding nop is
encountered, breaking the fallthrough detection.

If the current instruction doesn't have a function associated with it,
just consider it to be part of the previously detected function by not
overwriting the previous value of 'func'.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/546d143820cd08a46624ae8440d093dd6c902cae.1557766718.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Add rewind_stack_do_exit() to the noreturn list 2019-05-10T15:54:08+00:00 Josh Poimboeuf jpoimboe@redhat.com 2019-04-04T17:17:35+00:00 cf6cb79d57b049fbf2385bf79a34c651101615f0 [ Upstream commit 4fa5ecda2bf96be7464eb406df8aba9d89260227 ] This fixes the following warning seen on GCC 7.3: arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_regs() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/3418ebf5a5a9f6ed7e80954c741c0b904b67b5dc.1554398240.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4fa5ecda2bf96be7464eb406df8aba9d89260227 ]

This fixes the following warning seen on GCC 7.3:

  arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_regs()

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/3418ebf5a5a9f6ed7e80954c741c0b904b67b5dc.1554398240.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
objtool: Move objtool_file struct off the stack 2019-03-27T05:14:40+00:00 Josh Poimboeuf jpoimboe@redhat.com 2019-03-19T00:09:38+00:00 daaeeca918e726bda1681a34196437819821bc7f commit 0c671812f152b628bd87c0af49da032cc2a2c319 upstream. Objtool uses over 512k of stack, thanks to the hash table embedded in the objtool_file struct. This causes an unnecessarily large stack allocation and breaks users with low stack limits. Move the struct off the stack. Fixes: 042ba73fe7eb ("objtool: Add several performance improvements") Reported-by: Vassili Karpov <moosotc@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0c671812f152b628bd87c0af49da032cc2a2c319 upstream.

Objtool uses over 512k of stack, thanks to the hash table embedded in
the objtool_file struct.  This causes an unnecessarily large stack
allocation and breaks users with low stack limits.

Move the struct off the stack.

Fixes: 042ba73fe7eb ("objtool: Add several performance improvements")
Reported-by: Vassili Karpov <moosotc@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-08-13T20:35:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-08-13T20:35:26+00:00 f24d6f2654d39355cdf8285e21409ed8d56d4284 Pull x86 asm updates from Thomas Gleixner: "The lowlevel and ASM code updates for x86: - Make stack trace unwinding more reliable - ASM instruction updates for better code generation - Various cleanups" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Add two more instruction suffixes x86/asm/64: Use 32-bit XOR to zero registers x86/build/vdso: Simplify 'cmd_vdso2c' x86/build/vdso: Remove unused vdso-syms.lds x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder x86/unwind/orc: Detect the end of the stack x86/stacktrace: Do not fail for ORC with regs on stack x86/stacktrace: Clarify the reliable success paths x86/stacktrace: Remove STACKTRACE_DUMP_ONCE x86/stacktrace: Do not unwind after user regs x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation 
Pull x86 asm updates from Thomas Gleixner:
 "The lowlevel and ASM code updates for x86:

   - Make stack trace unwinding more reliable

   - ASM instruction updates for better code generation

   - Various cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Add two more instruction suffixes
  x86/asm/64: Use 32-bit XOR to zero registers
  x86/build/vdso: Simplify 'cmd_vdso2c'
  x86/build/vdso: Remove unused vdso-syms.lds
  x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder
  x86/unwind/orc: Detect the end of the stack
  x86/stacktrace: Do not fail for ORC with regs on stack
  x86/stacktrace: Clarify the reliable success paths
  x86/stacktrace: Remove STACKTRACE_DUMP_ONCE
  x86/stacktrace: Do not unwind after user regs
  x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation