commit da5b2ad1c2f18834cb1ce429e2e5a5cf5cbdf21b upstream.
After commit a0f7085f6a63 ("LoongArch: Add RANDOMIZE_KSTACK_OFFSET
support"), there are three new instructions "addi.d $fp, $sp, 32",
"sub.d $sp, $sp, $t0" and "addi.d $sp, $fp, -32" for the secondary
stack in do_syscall(), then there is a objtool warning "return with
modified stack frame" and no handle_syscall() which is the previous
frame of do_syscall() in the call trace when executing the command
"echo l > /proc/sysrq-trigger".
objdump shows something like this:
0000000000000000 <do_syscall>:
0: 02ff8063 addi.d $sp, $sp, -32
4: 29c04076 st.d $fp, $sp, 16
8: 29c02077 st.d $s0, $sp, 8
c: 29c06061 st.d $ra, $sp, 24
10: 02c08076 addi.d $fp, $sp, 32
...
74: 0011b063 sub.d $sp, $sp, $t0
...
a8: 4c000181 jirl $ra, $t0, 0
...
dc: 02ff82c3 addi.d $sp, $fp, -32
e0: 28c06061 ld.d $ra, $sp, 24
e4: 28c04076 ld.d $fp, $sp, 16
e8: 28c02077 ld.d $s0, $sp, 8
ec: 02c08063 addi.d $sp, $sp, 32
f0: 4c000020 jirl $zero, $ra, 0
The instruction "sub.d $sp, $sp, $t0" changes the stack bottom and the
new stack size is a random value, in order to find the return address of
do_syscall() which is stored in the original stack frame after executing
"jirl $ra, $t0, 0", it should use fp which points to the original stack
top.
At the beginning, the thought is tended to decode the secondary stack
instruction "sub.d $sp, $sp, $t0" and set it as a label, then check this
label for the two frame pointer instructions to change the cfa base and
cfa offset during the period of secondary stack in update_cfi_state().
This is valid for GCC but invalid for Clang due to there are different
secondary stack instructions for ClangBuiltLinux on LoongArch, something
like this:
0000000000000000 <do_syscall>:
...
88: 00119064 sub.d $a0, $sp, $a0
8c: 00150083 or $sp, $a0, $zero
...
Actually, it equals to a single instruction "sub.d $sp, $sp, $a0", but
there is no proper condition to check it as a label like GCC, and so the
beginning thought is not a good way.
Essentially, there are two special frame pointer instructions which are
"addi.d $fp, $sp, imm" and "addi.d $sp, $fp, imm", the first one points
fp to the original stack top and the second one restores the original
stack bottom from fp.
Based on the above analysis, in order to avoid adding an arch-specific
update_cfi_state(), we just add a member "frame_pointer" in the "struct
symbol" as a label to avoid affecting the current normal case, then set
it as true only if there is "addi.d $sp, $fp, imm". The last is to check
this label for the two frame pointer instructions to change the cfa base
and cfa offset in update_cfi_state().
Tested with the following two configs:
(1) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=n
(2) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
By the way, there is no effect for x86 with this patch, tested on the
x86 machine with Fedora 40 system.
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When compiling the v6.9-rc1 kernel with the x32 compiler, the following
errors are reported. The reason is that we take an "unsigned long"
variable and print it using "PRIx64" format string.
In file included from check.c:16:
check.c: In function ‘add_dead_ends’:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
46 | "%s: warning: objtool: " format "\n", \
| ^~~~~~~~~~~~~~~~~~~~~~~~
check.c:613:33: note: in expansion of macro ‘WARN’
613 | WARN("can't find unreachable insn at %s+0x%" PRIx64,
| ^~~~
...
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
When update the latest upstream gcc and binutils, it generates some objtool warnings on LoongArch, like this: arch/loongarch/kernel/entry.o: warning: objtool: ret_from_fork+0x0: unreachable instruction We can see that the reloc sym name is local label instead of section in relocation section '.rela.discard.unwind_hints', in this case, the reloc sym type is STT_NOTYPE instead of STT_SECTION. Let us check it to not return -1, then use reloc->sym->offset instead of reloc addend which is 0 to find the corresponding instruction. Here are some detailed info: [fedora@linux 6.8.test]$ gcc --version gcc (GCC) 14.0.1 20240129 (experimental) [fedora@linux 6.8.test]$ as --version GNU assembler (GNU Binutils) 2.42.50.20240129 [fedora@linux 6.8.test]$ readelf -r arch/loongarch/kernel/entry.o | grep -A 3 "rela.discard.unwind_hints" Relocation section '.rela.discard.unwind_hints' at offset 0x3a8 contains 7 entries: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000a00000063 R_LARCH_32_PCREL 0000000000000000 .Lhere_1 + 0 00000000000c 000b00000063 R_LARCH_32_PCREL 00000000000000a8 .Lhere_50 + 0 Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When update the latest upstream gcc and binutils, it generates more objtool warnings on LoongArch, like this: init/main.o: warning: objtool: unexpected relocation symbol type in .rela.discard.unreachable We can see that the reloc sym name is local label instead of section in relocation section '.rela.discard.unreachable', in this case, the reloc sym type is STT_NOTYPE instead of STT_SECTION. As suggested by Peter Zijlstra, we add a "local_label" member in struct symbol, then set it as true if symbol type is STT_NOTYPE and symbol name starts with ".L" string in classify_symbols(). Let's check reloc->sym->local_label to not return -1 in add_dead_ends(), and also use reloc->sym->offset instead of reloc addend which is 0 to find the corresponding instruction. At the same time, let's replace the variable "addend" with "offset" to reflect the reality. Here are some detailed info: [fedora@linux 6.8.test]$ gcc --version gcc (GCC) 14.0.1 20240129 (experimental) [fedora@linux 6.8.test]$ as --version GNU assembler (GNU Binutils) 2.42.50.20240129 [fedora@linux 6.8.test]$ readelf -r init/main.o | grep -A 2 "rela.discard.unreachable" Relocation section '.rela.discard.unreachable' at offset 0x6028 contains 1 entry: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 00d900000063 R_LARCH_32_PCREL 00000000000002c4 .L500^B1 + 0 Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If SAVE and RESTORE unwind hints are in different basic blocks, and
objtool sees the RESTORE before the SAVE, it errors out with:
vmlinux.o: warning: objtool: vmw_port_hb_in+0x242: objtool isn't smart enough to handle this CFI save/restore combo
In such a case, defer following the RESTORE block until the
straight-line path gets followed later.
Fixes: 8faea26e6111 ("objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402240702.zJFNmahW-lkp@intel.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240227073527.avcm5naavbv3cj5s@treble
Signed-off-by: Kees Cook <keescook@chromium.org>
Step 10/10 of the namespace unification of CPU mitigations related Kconfig options. [ mingo: Added one more case. ] Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20231121160740.1249350-11-leitao@debian.org
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options. [ mingo: Converted a few more uses in comments/messages as well. ] Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ariel Miculas <amiculas@cisco.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
GCC 14 introduces a new -Walloc-size included in -Wextra which errors out
like:
```
check.c: In function ‘cfi_alloc’:
check.c:294:33: error: allocation of insufficient size ‘1’ for type ‘struct cfi_state’ with size ‘320’ [-Werror=alloc-size]
294 | struct cfi_state *cfi = calloc(sizeof(struct cfi_state), 1);
| ^~~~~~
```
The calloc prototype is:
```
void *calloc(size_t nmemb, size_t size);
```
So, just swap the number of members and size arguments to match the prototype, as
we're initialising 1 struct of size `sizeof(struct ...)`. GCC then sees we're not
doing anything wrong.
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20231107205504.1470006-1-sam@gentoo.org