linux-stable.git/tools/objtool/arch, branch v4.14.44

objtool: Fix Clang enum conversion warning

2018-01-23T18:58:09+00:00

commit e7e83dd3ff1dd2f9e60213f6eedc7e5b08192062 upstream.

Fix the following Clang enum conversion warning:

  arch/x86/decode.c:141:20: error: implicit conversion from enumeration
  type 'enum op_src_type' to different enumeration
  type 'enum op_dest_type' [-Werror,-Wenum-conversion]

    op->dest.type = OP_SRC_REG;
		  ~ ^~~~~~~~~~

It just happened to work before because OP_SRC_REG and OP_DEST_REG have
the same value.

Signed-off-by: Lukas Bulwahn 
Signed-off-by: Josh Poimboeuf 
Reviewed-by: Nicholas Mc Guire 
Reviewed-by: Nick Desaulniers 
Cc: Jiri Slaby 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/b4156c5738bae781c392e7a3691aed4514ebbdf2.1514323568.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar 
Cc: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

x86/decoder: Fix and update the opcodes map

2017-12-29T16:53:42+00:00

commit f5b5fab1780c98b74526dbac527574bd02dc16f8 upstream

Update x86-opcode-map.txt based on the October 2017 Intel SDM publication.
Fix INVPID to INVVPID.
Add UD0 and UD1 instruction opcodes.

Also sync the objtool and perf tooling copies of this file.

Signed-off-by: Randy Dunlap 
Acked-by: Masami Hiramatsu 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Masami Hiramatsu 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

tools/headers: Sync objtool UAPI header

2017-12-29T16:53:42+00:00

commit a356d2ae50790f49858ebed35da9e206336fafee upstream.

objtool grew this new warning:

  Warning: synced file at 'tools/objtool/arch/x86/include/asm/inat.h' differs from latest kernel version at 'arch/x86/include/asm/inat.h'

which upstream header grew new INAT_SEG_* definitions.

Sync up the tooling version of the header.

Reported-by: Linus Torvalds 
Cc: Josh Poimboeuf 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

objtool: Move synced files to their original relative locations

2017-12-29T16:53:41+00:00

commit 6a77cff819ae3e31992bde6432c9b5720748a89b upstream.

This will enable more straightforward comparisons, and it also makes the
files 100% identical.

Suggested-by: Ingo Molnar 
Signed-off-by: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/407b2aaa317741f48fcf821592c0e96ab3be1890.1509974346.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version

2017-11-04T07:54:06+00:00

This fixes the following warning:

  warning: objtool: x86 instruction decoder differs from kernel

Reported-by: Stephen Rothwell 
Signed-off-by: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/013315a808ccf5580abc293808827c8e2b5e1354.1509719152.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar

objtool: Support unoptimized frame pointer setup

2017-09-28T05:25:54+00:00

Arnd Bergmann reported a bunch of warnings like:

  crypto/jitterentropy.o: warning: objtool: jent_fold_time()+0x3b: call without frame pointer save/setup
  crypto/jitterentropy.o: warning: objtool: jent_stuck()+0x1d: call without frame pointer save/setup
  crypto/jitterentropy.o: warning: objtool: jent_unbiased_bit()+0x15: call without frame pointer save/setup
  crypto/jitterentropy.o: warning: objtool: jent_read_entropy()+0x32: call without frame pointer save/setup
  crypto/jitterentropy.o: warning: objtool: jent_entropy_collector_free()+0x19: call without frame pointer save/setup

and

  arch/x86/events/core.o: warning: objtool: collect_events uses BP as a scratch register
  arch/x86/events/core.o: warning: objtool: events_ht_sysfs_show()+0x22: call without frame pointer save/setup

With certain rare configurations, GCC sometimes sets up the frame
pointer with:

  lea    (%rsp),%rbp

instead of:

  mov    %rsp,%rbp

The instructions are equivalent, so treat the former like the latter.

Reported-by: Arnd Bergmann 
Signed-off-by: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/a468af8b28a69b83fffc6d7668be9b6fcc873699.1506526584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar

objtool: Handle another GCC stack pointer adjustment bug

2017-09-23T13:06:19+00:00

The kbuild bot reported the following warning with GCC 4.4 and a
randconfig:

  net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0

This is caused by another GCC non-optimization, where it backs up and
restores the stack pointer for no apparent reason:

    2f91:       48 89 e0                mov    %rsp,%rax
    2f94:       4c 89 e7                mov    %r12,%rdi
    2f97:       4c 89 f6                mov    %r14,%rsi
    2f9a:       ba 20 00 00 00          mov    $0x20,%edx
    2f9f:       48 89 c4                mov    %rax,%rsp

This issue would have been happily ignored before the following commit:

  dd88a0a0c861 ("objtool: Handle GCC stack pointer adjustment bug")

But now that objtool is paying attention to such stack pointer writes
to/from a register, it needs to understand them properly.  In this case
that means recognizing that the "mov %rsp, %rax" instruction is
potentially a backup of the stack pointer.

Reported-by: kbuild test robot 
Signed-off-by: Josh Poimboeuf 
Cc: Alexander Potapenko 
Cc: Andrey Ryabinin 
Cc: Andy Lutomirski 
Cc: Arnd Bergmann 
Cc: Dmitriy Vyukov 
Cc: Linus Torvalds 
Cc: Matthias Kaehlcke 
Cc: Miguel Bernal Marin 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: dd88a0a0c861 ("objtool: Handle GCC stack pointer adjustment bug")
Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar

objtool: Handle GCC stack pointer adjustment bug

2017-08-30T08:48:41+00:00

Arnd Bergmann reported the following warning with GCC 7.1.1:

  fs/fs_pin.o: warning: objtool: pin_kill()+0x139: stack state mismatch: cfa1=7+88 cfa2=7+96

And the kbuild robot reported the following warnings with GCC 5.4.1:

  fs/fs_pin.o: warning: objtool: pin_kill()+0x182: return with modified stack frame
  fs/quota/dquot.o: warning: objtool: dquot_alloc_inode()+0x140: stack state mismatch: cfa1=7+120 cfa2=7+128
  fs/quota/dquot.o: warning: objtool: dquot_free_inode()+0x11a: stack state mismatch: cfa1=7+112 cfa2=7+120

Those warnings are caused by an unusual GCC non-optimization where it
uses an intermediate register to adjust the stack pointer.  It does:

  lea    0x8(%rsp), %rcx
  ...
  mov    %rcx, %rsp

Instead of the obvious:

  add    $0x8, %rsp

It makes no sense to use an intermediate register, so I opened a GCC bug
to track it:

  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81813

But it's not exactly a high-priority bug and it looks like we'll be
stuck with this issue for a while.  So for now we have to track register
values when they're loaded with stack pointer offsets.

This is kind of a big workaround for a tiny problem, but c'est la vie.
I hope to eventually create a GCC plugin to implement a big chunk of
objtool's functionality.  Hopefully at that point we'll be able to
remove of a lot of these GCC-isms from the objtool code.

Reported-by: Arnd Bergmann 
Reported-by: kbuild test robot 
Signed-off-by: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/6a41a96884c725e7f05413bb7df40cfe824b2444.1504028945.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar

objtool: Fix '-mtune=atom' decoding support in objtool 2.0

2017-07-28T06:33:32+00:00

With '-mtune=atom', which is enabled with CONFIG_MATOM=y, GCC uses some
unusual instructions for setting up the stack.

Instead of:

  mov %rsp, %rbp

it does:

  lea (%rsp), %rbp

And instead of:

  add imm, %rsp

it does:

  lea disp(%rsp), %rsp

Add support for these instructions to the objtool decoder.

Reported-by: Arnd Bergmann 
Signed-off-by: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/4ea1db896e821226efe1f8e09f270771bde47e65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar

objtool: Assume unannotated UD2 instructions are dead ends

2017-07-28T06:33:32+00:00

Arnd reported some false positive warnings with GCC 7:

  drivers/hid/wacom_wac.o: warning: objtool: wacom_bpt3_touch()+0x2a5: stack state mismatch: cfa1=7+8 cfa2=6+16
  drivers/iio/adc/vf610_adc.o: warning: objtool: vf610_adc_calculate_rates() falls through to next function vf610_adc_sample_set()
  drivers/pwm/pwm-hibvt.o: warning: objtool: hibvt_pwm_get_state() falls through to next function hibvt_pwm_remove()
  drivers/pwm/pwm-mediatek.o: warning: objtool: mtk_pwm_config() falls through to next function mtk_pwm_enable()
  drivers/spi/spi-bcm2835.o: warning: objtool: .text: unexpected end of section
  drivers/spi/spi-bcm2835aux.o: warning: objtool: .text: unexpected end of section
  drivers/watchdog/digicolor_wdt.o: warning: objtool: dc_wdt_get_timeleft() falls through to next function dc_wdt_restart()

When GCC 7 detects a potential divide-by-zero condition, it sometimes
inserts a UD2 instruction for the case where the divisor is zero,
instead of letting the hardware trap on the divide instruction.

Objtool doesn't consider UD2 to be fatal unless it's annotated with
unreachable().  So it considers the GCC-generated UD2 to be non-fatal,
and it tries to follow the control flow past the UD2 and gets
confused.

Previously, objtool *did* assume UD2 was always a dead end.  That
changed with the following commit:

  d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")

The motivation behind that change was that Peter was planning on using
UD2 for __WARN(), which is *not* a dead end.  However, it turns out
that some emulators rely on UD2 being fatal, so he ended up using
'ud0' instead:

  9a93848fe787 ("x86/debug: Implement __WARN() using UD0")

For GCC 4.5+, it should be safe to go back to the previous assumption
that UD2 is fatal, even when it's not annotated with unreachable().

But for pre-4.5 versions of GCC, the unreachable() macro isn't
supported, so such cases of UD2 need to be explicitly annotated as
reachable.

Reported-by: Arnd Bergmann 
Signed-off-by: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/e57fa9dfede25f79487da8126ee9cdf7b856db65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar