linux-stable.git/tools/lib/bpf, branch v4.19.321

libbpf: Fix alen calculation in libbpf_nla_dump_errormsg()

2023-03-11T15:31:37+00:00

[ Upstream commit 17bcd27a08a21397698edf143084d7c87ce17946 ]

The code assumes that everything that comes after nlmsgerr are nlattrs.
When calculating their size, it does not account for the initial
nlmsghdr. This may lead to accessing uninitialized memory.

Fixes: bbf48c18ee0c ("libbpf: add error reporting in XDP")
Signed-off-by: Ilya Leoshkevich 
Signed-off-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20230210001210.395194-8-iii@linux.ibm.com
Signed-off-by: Sasha Levin

libbpf: Fix the name of a reused map

2022-08-25T09:15:08+00:00

[ Upstream commit bf3f00378524adae16628cbadbd11ba7211863bb ]

BPF map name is limited to BPF_OBJ_NAME_LEN.
A map name is defined as being longer than BPF_OBJ_NAME_LEN,
it will be truncated to BPF_OBJ_NAME_LEN when a userspace program
calls libbpf to create the map. A pinned map also generates a path
in the /sys. If the previous program wanted to reuse the map，
it can not get bpf_map by name, because the name of the map is only
partially the same as the name which get from pinned path.

The syscall information below show that map name "process_pinned_map"
is truncated to "process_pinned_".

    bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/process_pinned_map",
    bpf_fd=0, file_flags=0}, 144) = -1 ENOENT (No such file or directory)

    bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4,
    value_size=4,max_entries=1024, map_flags=0, inner_map_fd=0,
    map_name="process_pinned_",map_ifindex=0, btf_fd=3, btf_key_type_id=6,
    btf_value_type_id=10,btf_vmlinux_value_type_id=0}, 72) = 4

This patch check that if the name of pinned map are the same as the
actual name for the first (BPF_OBJ_NAME_LEN - 1),
bpf map still uses the name which is included in bpf object.

Fixes: 26736eb9a483 ("tools: libbpf: allow map reuse")
Signed-off-by: Anquan Wu 
Signed-off-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/OSZP286MB1725CEA1C95C5CB8E7CCC53FB8869@OSZP286MB1725.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin

bpf: Add BPF_F_ANY_ALIGNMENT.

2021-06-10T11:24:08+00:00

commit e9ee9efc0d176512cdce9d27ff8549d7ffa2bfcd upstream

Often we want to write tests cases that check things like bad context
offset accesses.  And one way to do this is to use an odd offset on,
for example, a 32-bit load.

This unfortunately triggers the alignment checks first on platforms
that do not set CONFIG_EFFICIENT_UNALIGNED_ACCESS.  So the test
case see the alignment failure rather than what it was testing for.

It is often not completely possible to respect the original intention
of the test, or even test the same exact thing, while solving the
alignment issue.

Another option could have been to check the alignment after the
context and other validations are performed by the verifier, but
that is a non-trivial change to the verifier.

Signed-off-by: David S. Miller 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Tiezhu Yang 
Signed-off-by: Greg Kroah-Hartman

libbpf: Fix INSTALL flag order

2021-03-30T12:37:00+00:00

[ Upstream commit e7fb6465d4c8e767e39cbee72464e0060ab3d20c ]

It was reported ([0]) that having optional -m flag between source and
destination arguments in install command breaks bpftools cross-build
on MacOS. Move -m to the front to fix this issue.

  [0] https://github.com/openwrt/openwrt/pull/3959

Fixes: 7110d80d53f4 ("libbpf: Makefile set specified permission mode")
Signed-off-by: Georgi Valkov 
Signed-off-by: Andrii Nakryiko 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20210308183038.613432-1-andrii@kernel.org
Signed-off-by: Sasha Levin

libbpf: Fix error handling in bpf_map__reuse_fd()

2019-12-31T15:35:33+00:00

[ Upstream commit d1b4574a4b86565325ef2e545eda8dfc9aa07c60 ]

bpf_map__reuse_fd() was calling close() in the error path before returning
an error value based on errno. However, close can change errno, so that can
lead to potentially misleading error messages. Instead, explicitly store
errno in the err variable before each goto.

Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: Alexei Starovoitov 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk
Signed-off-by: Sasha Levin

tools/bpf: make libbpf _GNU_SOURCE friendly

2019-12-13T07:52:15+00:00

[ Upstream commit b42699547fc9fb1057795bccc21a6445743a7fde ]

During porting libbpf to bcc, I got some warnings like below:
  ...
  [  2%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf.c.o
  /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf.c:12:0:
  warning: "_GNU_SOURCE" redefined [enabled by default]
   #define _GNU_SOURCE
  ...
  [  3%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf_errno.c.o
  /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c: In function ‘libbpf_strerror’:
  /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c:45:7:
  warning: assignment makes integer from pointer without a cast [enabled by default]
     ret = strerror_r(err, buf, size);
  ...

bcc is built with _GNU_SOURCE defined and this caused the above warning.
This patch intends to make libpf _GNU_SOURCE friendly by
  . define _GNU_SOURCE in libbpf.c unless it is not defined
  . undefine _GNU_SOURCE as non-gnu version of strerror_r is expected.

Signed-off-by: Yonghong Song 
Acked-by: Jakub Kicinski 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

bpf: libbpf: retry loading program on EAGAIN

2019-10-01T06:26:08+00:00

[ Upstream commit 86edaed379632e216a97e6bcef9f498b64522d50 ]

Commit c3494801cd17 ("bpf: check pending signals while
verifying programs") makes it possible for the BPF_PROG_LOAD
to fail with EAGAIN. Retry unconditionally in this case.

Fixes: c3494801cd17 ("bpf: check pending signals while verifying programs")
Signed-off-by: Lorenz Bauer 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

bpf, libbpf, smatch: Fix potential NULL pointer dereference

2019-07-26T07:14:15+00:00

[ Upstream commit 33bae185f74d49a0d7b1bfaafb8e959efce0f243 ]

Based on the following report from Smatch, fix the potential NULL
pointer dereference check:

  tools/lib/bpf/libbpf.c:3493
  bpf_prog_load_xattr() warn: variable dereferenced before check 'attr'
  (see line 3483)

  3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
  3480                         struct bpf_object **pobj, int *prog_fd)
  3481 {
  3482         struct bpf_object_open_attr open_attr = {
  3483                 .file           = attr->file,
  3484                 .prog_type      = attr->prog_type,
                                         ^^^^^^
  3485         };

At the head of function, it directly access 'attr' without checking
if it's NULL pointer. This patch moves the values assignment after
validating 'attr' and 'attr->file'.

Signed-off-by: Leo Yan 
Acked-by: Yonghong Song 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

libbpf: fix samples/bpf build failure due to undefined UINT32_MAX

2019-05-31T13:46:14+00:00

[ Upstream commit 32e621e55496a0009f44fe4914cd4a23cade4984 ]

Currently, building bpf samples will cause the following error.

    ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) ..
     #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */
                               ^
    ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE'
     extern char bpf_log_buf[BPF_LOG_BUF_SIZE];
                             ^~~~~~~~~~~~~~~~

Due to commit 4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error")
hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is
defined in  header.

Even with this change, bpf selftests are running fine since these are built
with clang and it includes header(-idirafter) from clang/6.0.0/include.
(it has )

    clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \
    -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \
    -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \
    llc -march=bpf -mcpu=generic  -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o

But bpf samples are compiled with GCC, and it only searches and includes
headers declared at the target file. As '#include ' hasn't been
declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples.

    gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \
    -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \
    -I./tools/  lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c;

This commit add declaration of '#include ' to tools/lib/bpf/bpf.h
to fix this problem.

Signed-off-by: Daniel T. Lee 
Acked-by: Yonghong Song 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin

tools/bpf: fix perf build error with uClibc (seen on ARC)

2019-05-31T13:46:08+00:00

[ Upstream commit ca31ca8247e2d3807ff5fa1d1760616a2292001c ]

When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.

| Auto-detecting system features:
|
| ...                     get_cpuid: [ OFF ]
| ...                           bpf: [ on  ]
|
| #  error __NR_bpf not defined. libbpf does not support your arch.
    ^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
|  return syscall(__NR_bpf, cmd, attr, size);
|                 ^~~~~~~~
|                 sys_bpf

Signed-off-by: Vineet Gupta 
Acked-by: Yonghong Song 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin