linux-stable.git/tools/include/uapi, branch v5.15.208 Linux kernel stable tree bpf: Fix L4 csum update on IPv6 in CHECKSUM_COMPLETE 2025-06-27T10:05:38+00:00 Paul Chaignon paul.chaignon@gmail.com 2025-05-29T10:28:35+00:00 6d7fcd8a7a42775aca8fff702acfb83e4dcd5f0f commit ead7f9b8de65632ef8060b84b0c55049a33cfea1 upstream. In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other things, update the L4 checksum after reverse SNATing IPv6 packets. That use case is however not currently supported and leads to invalid skb->csum values in some cases. This patch adds support for IPv6 address changes in bpf_l4_csum_update via a new flag. When calling bpf_l4_csum_replace in Cilium, it ends up calling inet_proto_csum_replace_by_diff: 1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb, 2: __wsum diff, bool pseudohdr) 3: { 4: if (skb->ip_summed != CHECKSUM_PARTIAL) { 5: csum_replace_by_diff(sum, diff); 6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr) 7: skb->csum = ~csum_sub(diff, skb->csum); 8: } else if (pseudohdr) { 9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum))); 10: } 11: } The bug happens when we're in the CHECKSUM_COMPLETE state. We've just updated one of the IPv6 addresses. The helper now updates the L4 header checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't. For an IPv6 packet, the updates of the IPv6 address and of the L4 checksum will cancel each other. The checksums are set such that computing a checksum over the packet including its checksum will result in a sum of 0. So the same is true here when we update the L4 checksum on line 5. We'll update it as to cancel the previous IPv6 address update. Hence skb->csum should remain untouched in this case. The same bug doesn't affect IPv4 packets because, in that case, three fields are updated: the IPv4 address, the IP checksum, and the L4 checksum. The change to the IPv4 address and one of the checksums still cancel each other in skb->csum, but we're left with one checksum update and should therefore update skb->csum accordingly. That's exactly what inet_proto_csum_replace_by_diff does. This special case for IPv6 L4 checksums is also described atop inet_proto_csum_replace16, the function we should be using in this case. This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6, to indicate that we're updating the L4 checksum of an IPv6 packet. When the flag is set, inet_proto_csum_replace_by_diff will skip the skb->csum update. Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper") Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Note: Fixed conflict due to unrelated comment change. ] Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ead7f9b8de65632ef8060b84b0c55049a33cfea1 upstream.

In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.

When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:

    1:  void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
    2:                                       __wsum diff, bool pseudohdr)
    3:  {
    4:      if (skb->ip_summed != CHECKSUM_PARTIAL) {
    5:          csum_replace_by_diff(sum, diff);
    6:          if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
    7:              skb->csum = ~csum_sub(diff, skb->csum);
    8:      } else if (pseudohdr) {
    9:          *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
    10:     }
    11: }

The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.

For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.

The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.

This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.

This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.

Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Note: Fixed conflict due to unrelated comment change. ]
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: Pack struct bpf_fib_lookup 2024-06-16T11:39:18+00:00 Anton Protopopov aspsk@isovalent.com 2024-04-03T12:33:03+00:00 f654b258e9fa47534e1bc0f3c4f957935750ee59 [ Upstream commit f91717007217d975aa975ddabd91ae1a107b9bff ] The struct bpf_fib_lookup is supposed to be of size 64. A recent commit 59b418c7063d ("bpf: Add a check for struct bpf_fib_lookup size") added a static assertion to check this property so that future changes to the structure will not accidentally break this assumption. As it immediately turned out, on some 32-bit arm systems, when AEABI=n, the total size of the structure was equal to 68, see [1]. This happened because the bpf_fib_lookup structure contains a union of two 16-bit fields: union { __u16 tot_len; __u16 mtu_result; }; which was supposed to compile to a 16-bit-aligned 16-bit field. On the aforementioned setups it was instead both aligned and padded to 32-bits. Declare this inner union as __attribute__((packed, aligned(2))) such that it always is of size 2 and is aligned to 16 bits. [1] https://lore.kernel.org/all/CA+G9fYtsoP51f-oP_Sp5MOq-Ffv8La2RztNpwvE6+R1VtFiLrw@mail.gmail.com/#t Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: e1850ea9bd9e ("bpf: bpf_fib_lookup return MTU value as output when looked up") Signed-off-by: Anton Protopopov <aspsk@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240403123303.1452184-1-aspsk@isovalent.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f91717007217d975aa975ddabd91ae1a107b9bff ]

The struct bpf_fib_lookup is supposed to be of size 64. A recent commit
59b418c7063d ("bpf: Add a check for struct bpf_fib_lookup size") added
a static assertion to check this property so that future changes to the
structure will not accidentally break this assumption.

As it immediately turned out, on some 32-bit arm systems, when AEABI=n,
the total size of the structure was equal to 68, see [1]. This happened
because the bpf_fib_lookup structure contains a union of two 16-bit
fields:

    union {
            __u16 tot_len;
            __u16 mtu_result;
    };

which was supposed to compile to a 16-bit-aligned 16-bit field. On the
aforementioned setups it was instead both aligned and padded to 32-bits.

Declare this inner union as __attribute__((packed, aligned(2))) such
that it always is of size 2 and is aligned to 16 bits.

  [1] https://lore.kernel.org/all/CA+G9fYtsoP51f-oP_Sp5MOq-Ffv8La2RztNpwvE6+R1VtFiLrw@mail.gmail.com/#t

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: e1850ea9bd9e ("bpf: bpf_fib_lookup return MTU value as output when looked up")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240403123303.1452184-1-aspsk@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: Derive source IP addr via bpf_*_fib_lookup() 2024-03-06T14:38:50+00:00 Martynas Pumputis m@lambda.lt 2023-10-07T08:14:14+00:00 68dbe92d677ca6bb9ae98d94722ae56758b68433 commit dab4e1f06cabb6834de14264394ccab197007302 upstream. Extend the bpf_fib_lookup() helper by making it to return the source IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set. For example, the following snippet can be used to derive the desired source IP address: struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr }; ret = bpf_skb_fib_lookup(skb, p, sizeof(p), BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH); if (ret != BPF_FIB_LKUP_RET_SUCCESS) return TC_ACT_SHOT; /* the p.ipv4_src now contains the source address */ The inability to derive the proper source address may cause malfunctions in BPF-based dataplanes for hosts containing netdevs with more than one routable IP address or for multi-homed hosts. For example, Cilium implements packet masquerading in BPF. If an egressing netdev to which the Cilium's BPF prog is attached has multiple IP addresses, then only one [hardcoded] IP address can be used for masquerading. This breaks connectivity if any other IP address should have been selected instead, for example, when a public and private addresses are attached to the same egress interface. The change was tested with Cilium [1]. Nikolay Aleksandrov helped to figure out the IPv6 addr selection. [1]: https://github.com/cilium/cilium/pull/28283 Signed-off-by: Martynas Pumputis <m@lambda.lt> Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dab4e1f06cabb6834de14264394ccab197007302 upstream.

Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.

For example, the following snippet can be used to derive the desired
source IP address:

    struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };

    ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
            BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
    if (ret != BPF_FIB_LKUP_RET_SUCCESS)
        return TC_ACT_SHOT;

    /* the p.ipv4_src now contains the source address */

The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.

For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.

The change was tested with Cilium [1].

Nikolay Aleksandrov helped to figure out the IPv6 addr selection.

[1]: https://github.com/cilium/cilium/pull/28283

Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: Add table ID to bpf_fib_lookup BPF helper 2024-03-06T14:38:50+00:00 Louis DeLosSantos louis.delos.devel@gmail.com 2023-05-31T19:38:48+00:00 39b4ee40d204b75901d558c158beb91c473ecea7 commit 8ad77e72caae22a1ddcfd0c03f2884929e93b7a4 upstream. Add ability to specify routing table ID to the `bpf_fib_lookup` BPF helper. A new field `tbid` is added to `struct bpf_fib_lookup` used as parameters to the `bpf_fib_lookup` BPF helper. When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and `BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup` will be used as the table ID for the fib lookup. If the `tbid` does not exist the fib lookup will fail with `BPF_FIB_LKUP_RET_NOT_FWDED`. The `tbid` field becomes a union over the vlan related output fields in `struct bpf_fib_lookup` and will be zeroed immediately after usage. This functionality is useful in containerized environments. For instance, if a CNI wants to dictate the next-hop for traffic leaving a container it can create a container-specific routing table and perform a fib lookup against this table in a "host-net-namespace-side" TC program. This functionality also allows `ip rule` like functionality at the TC layer, allowing an eBPF program to pick a routing table based on some aspect of the sk_buff. As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN datapath. When egress traffic leaves a Pod an eBPF program attached by Cilium will determine which VRF the egress traffic should target, and then perform a FIB lookup in a specific table representing this VRF's FIB. Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8ad77e72caae22a1ddcfd0c03f2884929e93b7a4 upstream.

Add ability to specify routing table ID to the `bpf_fib_lookup` BPF
helper.

A new field `tbid` is added to `struct bpf_fib_lookup` used as
parameters to the `bpf_fib_lookup` BPF helper.

When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and
`BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup`
will be used as the table ID for the fib lookup.

If the `tbid` does not exist the fib lookup will fail with
`BPF_FIB_LKUP_RET_NOT_FWDED`.

The `tbid` field becomes a union over the vlan related output fields
in `struct bpf_fib_lookup` and will be zeroed immediately after usage.

This functionality is useful in containerized environments.

For instance, if a CNI wants to dictate the next-hop for traffic leaving
a container it can create a container-specific routing table and perform
a fib lookup against this table in a "host-net-namespace-side" TC program.

This functionality also allows `ip rule` like functionality at the TC
layer, allowing an eBPF program to pick a routing table based on some
aspect of the sk_buff.

As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN
datapath.

When egress traffic leaves a Pod an eBPF program attached by Cilium will
determine which VRF the egress traffic should target, and then perform a
FIB lookup in a specific table representing this VRF's FIB.

Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup 2024-03-06T14:38:50+00:00 Martin KaFai Lau martin.lau@kernel.org 2023-02-17T20:55:14+00:00 75ca92271da5e6aad9cb3998397f7eb9b5d1254d commit 31de4105f00d64570139bc5494a201b0bd57349f upstream. The bpf_fib_lookup() also looks up the neigh table. This was done before bpf_redirect_neigh() was added. In the use case that does not manage the neigh table and requires bpf_fib_lookup() to lookup a fib to decide if it needs to redirect or not, the bpf prog can depend only on using bpf_redirect_neigh() to lookup the neigh. It also keeps the neigh entries fresh and connected. This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid the double neigh lookup when the bpf prog always call bpf_redirect_neigh() to do the neigh lookup. The params->smac output is skipped together when SKIP_NEIGH is set because bpf_redirect_neigh() will figure out the smac also. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 31de4105f00d64570139bc5494a201b0bd57349f upstream.

The bpf_fib_lookup() also looks up the neigh table.
This was done before bpf_redirect_neigh() was added.

In the use case that does not manage the neigh table
and requires bpf_fib_lookup() to lookup a fib to
decide if it needs to redirect or not, the bpf prog can
depend only on using bpf_redirect_neigh() to lookup the
neigh. It also keeps the neigh entries fresh and connected.

This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid
the double neigh lookup when the bpf prog always call
bpf_redirect_neigh() to do the neigh lookup. The params->smac
output is skipped together when SKIP_NEIGH is set because
bpf_redirect_neigh() will figure out the smac also.

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources 2024-03-01T12:21:52+00:00 Arnaldo Carvalho de Melo acme@redhat.com 2020-12-17T17:58:51+00:00 47b6345ddb6cc83f2913ad5abe6ad12e4459ebf0 [ Upstream commit fabe0c61d842637b722344bcd49bfb1b76e2cc68 ] To pick the changes from: 6b2a51ff03bf0c54 ("fscrypt: Add HCTR2 support for filename encryption") That don't result in any changes in tooling, just causes this to be rebuilt: CC /tmp/build/perf-urgent/trace/beauty/sync_file_range.o LD /tmp/build/perf-urgent/trace/beauty/perf-in.o addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h' diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Huckleberry <nhuck@google.com> Link: https://lore.kernel.org/lkml/Yvzl8C7O1b+hf9GS@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fabe0c61d842637b722344bcd49bfb1b76e2cc68 ]

To pick the changes from:

  6b2a51ff03bf0c54 ("fscrypt: Add HCTR2 support for filename encryption")

That don't result in any changes in tooling, just causes this to be
rebuilt:

  CC      /tmp/build/perf-urgent/trace/beauty/sync_file_range.o
  LD      /tmp/build/perf-urgent/trace/beauty/perf-in.o

addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
  diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Huckleberry <nhuck@google.com>
Link: https://lore.kernel.org/lkml/Yvzl8C7O1b+hf9GS@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: Add crosstask check to __bpf_get_stack 2024-01-25T22:52:36+00:00 Jordan Rome jordalgo@meta.com 2023-11-08T11:23:34+00:00 131afd9a5765d9fc6549019e6f90797694a12b1a [ Upstream commit b8e3a87a627b575896e448021e5c2f8a3bc19931 ] Currently get_perf_callchain only supports user stack walking for the current task. Passing the correct *crosstask* param will return 0 frames if the task passed to __bpf_get_stack isn't the current one instead of a single incorrect frame/address. This change passes the correct *crosstask* param but also does a preemptive check in __bpf_get_stack if the task is current and returns -EOPNOTSUPP if it is not. This issue was found using bpf_get_task_stack inside a BPF iterator ("iter/task"), which iterates over all tasks. bpf_get_task_stack works fine for fetching kernel stacks but because get_perf_callchain relies on the caller to know if the requested *task* is the current one (via *crosstask*) it was failing in a confusing way. It might be possible to get user stacks for all tasks utilizing something like access_process_vm but that requires the bpf program calling bpf_get_task_stack to be sleepable and would therefore be a breaking change. Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()") Signed-off-by: Jordan Rome <jordalgo@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b8e3a87a627b575896e448021e5c2f8a3bc19931 ]

Currently get_perf_callchain only supports user stack walking for
the current task. Passing the correct *crosstask* param will return
0 frames if the task passed to __bpf_get_stack isn't the current
one instead of a single incorrect frame/address. This change
passes the correct *crosstask* param but also does a preemptive
check in __bpf_get_stack if the task is current and returns
-EOPNOTSUPP if it is not.

This issue was found using bpf_get_task_stack inside a BPF
iterator ("iter/task"), which iterates over all tasks.
bpf_get_task_stack works fine for fetching kernel stacks
but because get_perf_callchain relies on the caller to know
if the requested *task* is the current one (via *crosstask*)
it was failing in a confusing way.

It might be possible to get user stacks for all tasks utilizing
something like access_process_vm but that requires the bpf
program calling bpf_get_task_stack to be sleepable and would
therefore be a breaking change.

Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Jordan Rome <jordalgo@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
tools headers UAPI: Sync linux/perf_event.h with the kernel sources 2023-12-13T17:36:46+00:00 Namhyung Kim namhyung@kernel.org 2022-08-19T00:36:41+00:00 ab9ac2cb57403cb6a20a36e18eff5bb64fdc8343 commit 65ba872a6971c11ceb342c3330f059289c0e6bdb upstream. To pick the trivial change in: 119a784c81270eb8 ("perf/core: Add a new read format to get a number of lost samples") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220819003644.508916-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 65ba872a6971c11ceb342c3330f059289c0e6bdb upstream.

To pick the trivial change in:

  119a784c81270eb8 ("perf/core: Add a new read format to get a number of lost samples")

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
perf: Add irq and exception return branch types 2023-10-25T09:58:58+00:00 Anshuman Khandual anshuman.khandual@arm.com 2022-02-24T05:36:54+00:00 030099bc9115ec0db1de33665eb47bc8cade9e62 [ Upstream commit cedd3614e5d9c80908099c19f8716714ce0610b1 ] This expands generic branch type classification by adding two more entries there in i.e irq and exception return. Also updates the x86 implementation to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes branch types reported to user space on x86 platform but it should not be a problem. The possible scenarios and impacts are enumerated here. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com Stable-dep-of: e53899771a02 ("perf/x86/lbr: Filter vsyscall addresses") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cedd3614e5d9c80908099c19f8716714ce0610b1 ]

This expands generic branch type classification by adding two more entries
there in i.e irq and exception return. Also updates the x86 implementation
to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes
branch types reported to user space on x86 platform but it should not be a
problem. The possible scenarios and impacts are enumerated here.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com
Stable-dep-of: e53899771a02 ("perf/x86/lbr: Filter vsyscall addresses")
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf: Clarify error expectations from bpf_clone_redirect 2023-10-06T11:18:17+00:00 Stanislav Fomichev sdf@google.com 2023-09-11T19:47:30+00:00 9da93c74490cb1c53a32185d4b74f0ebc7e74e4a [ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ] Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") exposed the fact that bpf_clone_redirect is capable of returning raw NET_XMIT_XXX return codes. This is in the conflict with its UAPI doc which says the following: "0 on success, or a negative error in case of failure." Update the UAPI to reflect the fact that bpf_clone_redirect can return positive error numbers, but don't explicitly define their meaning. Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ]

Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.

This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."

Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.

Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>