linux-stable.git/tools/build, branch v4.19.78

perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz

2019-02-12T18:47:16+00:00

[ Upstream commit 14541b1e7e723859ff2c75c6fc10cdbbec6b8c34 ]

Current libbfd feature test unconditionally links against -liberty and -lz.
While it's required on some systems (e.g. opensuse), it's completely
unnecessary on the others, where only -lbdf is sufficient (debian).
This patch streamlines (and renames) the following feature checks:

feature-libbfd           - only link against -lbfd (debian),
                           see commit 2cf9040714f3 ("perf tools: Fix bfd
			   dependency libraries detection")
feature-libbfd-liberty   - link against -lbfd and -liberty
feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse),
                           see commit 280e7c48c3b8 ("perf tools: fix BFD
			   detection on opensuse")

(feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z}
for clarity)

The main motivation is to fix this feature test for bpftool which is
currently broken on debian (libbfd feature shows OFF, but we still
unconditionally link against -lbfd and it works).

Tested on debian with only -lbfd installed (without -liberty); I'd
appreciate if somebody on the other systems can test this new detection
method.

Signed-off-by: Stanislav Fomichev 
Acked-by: Jiri Olsa 
Cc: Alexander Shishkin 
Cc: Mathieu Poirier 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-08-15T22:04:25+00:00

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux

2018-07-21T04:17:12+00:00

All conflicts were trivial overlapping changes, so reasonably
easy to resolve.

Signed-off-by: David S. Miller

kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS

2018-07-17T16:18:05+00:00

In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.

Signed-off-by: Laura Abbott 
Signed-off-by: Masahiro Yamada

kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS

2018-07-17T16:18:05+00:00

In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.

Signed-off-by: Laura Abbott 
Signed-off-by: Masahiro Yamada

tools: include reallocarray feature test in FEATURE_TESTS_BASIC

2018-07-14T08:38:48+00:00

perf propagates its feature check results to libbpf.  This means
features for which perf probes must be a superset of libbpf's
required features.  perf depends on FEATURE_TESTS_BASIC for its list
of features.

commit 531b014e7a2f ("tools: bpf: make use of reallocarray") added
reallocarray use to libbpf, make perf also perform the reallocarray
feature check.

Fixes: 531b014e7a2f ("tools: bpf: make use of reallocarray")
Reported-by: Guenter Roeck 
Signed-off-by: Jakub Kicinski 
Tested-by: Guenter Roeck 
Signed-off-by: Daniel Borkmann

tools: build: Use HOSTLDFLAGS with fixdep

2018-07-12T15:48:18+00:00

The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS.
Fix this.

Signed-off-by: Laura Abbott 
Acked-by: Jiri Olsa 
Signed-off-by: Masahiro Yamada

tools: build: Fixup host c flags

2018-07-12T15:48:17+00:00

Commit 0c3b7e42616f ("tools build: Add support for host programs format")
introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the
variable is HOSTCFLAGS. Fix this up.

Fixes: 0c3b7e42616f ("tools build: Add support for host programs format")
Signed-off-by: Laura Abbott 
Acked-by: Jiri Olsa 
Signed-off-by: Masahiro Yamada

tools build: fix # escaping in .cmd files for future Make

2018-07-12T15:48:17+00:00

In 2016 GNU Make made a backwards incompatible change to the way '#'
characters were handled in Makefiles when used inside functions or
macros:

http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57

Due to this change, when attempting to run `make prepare' I get a
spurious make syntax error:

    /home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator.  Stop.

When inspecting `.fixdep.o.cmd' it includes two lines which use
unescaped comment characters at the top:

    \# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep)
    \# using basic dep data

This is because `tools/build/Build.include' prints these '\#'
characters:

    printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \
    printf '\# using basic dep data\n\n' >> $(dot-target).cmd;           \

This completes commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files
for future Make").

Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap 
Cc: Rasmus Villemoes 
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel 
Signed-off-by: Masahiro Yamada

tools: bpf: make use of reallocarray

2018-07-11T20:13:34+00:00

reallocarray() is a safer variant of realloc which checks for
multiplication overflow in case of array allocation.  Since it's
not available in Glibc < 2.26 import kernel's overflow.h and
add a static inline implementation when needed.  Use feature
detection to probe for existence of reallocarray.

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
Reviewed-by: Jiong Wang 
Signed-off-by: Daniel Borkmann