linux-stable.git/sound, branch v6.1.4

ASoC: jz4740-i2s: Handle independent FIFO flush bits

2023-01-07T10:11:51+00:00

commit 8b3a9ad86239f80ed569e23c3954a311f66481d6 upstream.

On the JZ4740, there is a single bit that flushes (empties) both
the transmit and receive FIFO. Later SoCs have independent flush
bits for each FIFO.

Independent FIFOs can be flushed before the snd_soc_dai_active()
check because it won't disturb other active streams. This ensures
that the FIFO we're about to use is always flushed before starting
up. With shared FIFOs we can't do that because if another substream
is active, flushing its FIFO would cause underrun errors.

This also fixes a bug: since we were only setting the JZ4740's
flush bit, which corresponds to the TX FIFO flush bit on other
SoCs, other SoCs were not having their RX FIFO flushed at all.

Fixes: 967beb2e8777 ("ASoC: jz4740: Add jz4780 support")
Reviewed-by: Paul Cercueil 
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald 
Link: https://lore.kernel.org/r/20221023143328.160866-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless

2023-01-07T10:11:43+00:00

[ Upstream commit fd28941cff1cd9d8ffa59fe11eb64148e09b6ed6 ]

It seems that the firmware is broken and does not accept
the UAC_EP_CS_ATTR_SAMPLE_RATE URB. There is only one rate (48000Hz)
available in the descriptors for the output endpoint.

Create a new quirk QUIRK_FLAG_FIXED_RATE to skip the rate setup
when only one rate is available (fixed).

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216798
Signed-off-by: Jaroslav Kysela 
Link: https://lore.kernel.org/r/20221215153037.1163786-1-perex@perex.cz
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.

2023-01-07T10:11:43+00:00

[ Upstream commit 9fb9fa18fb50d1a33a1bd947681fce96fc2c8db6 ]

New HW platforms with multiple CS42L42 parts, faster CPU and i2c
requre some extra delay to allow PLL to settle and lock. Adding
extra 10ms delay.

Signed-off-by: Vitaly Rodionov 
Link: https://lore.kernel.org/r/20221205145713.23852-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops

2023-01-07T10:11:41+00:00

[ Upstream commit a4517c4f3423c7c448f2c359218f97c1173523a1 ]

The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.

Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].

Signed-off-by: Chris Chiu 
Cc: 
Link: https://lore.kernel.org/r/20221226114303.4027500-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

ALSA: patch_realtek: Fix Dell Inspiron Plus 16

2023-01-07T10:11:41+00:00

[ Upstream commit 2912cdda734d9136615ed05636d9fcbca2a7a3c5 ]

The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.

Signed-off-by: Philipp Jungkamp 
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai 
Stable-dep-of: a4517c4f3423 ("ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops")
Signed-off-by: Sasha Levin

ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs

2023-01-04T10:29:00+00:00

commit 090ddad4c7a9fefd647c762093a555870a19c8b2 upstream.

The recent code refactoring for HD-audio HDMI codec driver caused a
regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire
don't recognize HDMI outputs any longer while the direct output via
ALSA raw access still works.

The problem turned out that, after the code refactoring, the driver
assumes only the dynamic PCM assignment, and when a PCM stream that
still isn't assigned to any pin gets opened, the driver tries to
assign any free converter to the PCM stream.  This behavior is OK for
Intel and other codecs, as they have arbitrary connections between
pins and converters.  OTOH, on AMD chips that have a 1:1 mapping
between pins and converters, this may end up with blocking the open of
the next PCM stream for the pin that is tied with the formerly taken
converter.

Also, with the code refactoring, more PCM streams are exposed than
necessary as we assume all converters can be used, while this isn't
true for AMD case.  This may change the PCM stream assignment and
confuse users as well.

This patch fixes those problems by:

- Introducing a flag spec->static_pcm_mapping, and if it's set, the
  driver applies the static mapping between pins and converters at the
  probe time
- Limiting the number of PCM streams per pins, too; this avoids the
  superfluous PCM streams

Fixes: ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Cc: 
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836
Co-developed-by: Jaroslav Kysela 
Signed-off-by: Jaroslav Kysela 
Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: line6: fix stack overflow in line6_midi_transmit

2023-01-04T10:29:00+00:00

commit b8800d324abb50160560c636bfafe2c81001b66c upstream.

Correctly calculate available space including the size of the chunk
buffer. This fixes a buffer overflow when multiple MIDI sysex
messages are sent to a PODxt device.

Signed-off-by: Artem Egorkine 
Cc: 
Link: https://lore.kernel.org/r/20221225105728.1153989-2-arteme@gmail.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: line6: correct midi status byte when receiving data from podxt

2023-01-04T10:29:00+00:00

commit 8508fa2e7472f673edbeedf1b1d2b7a6bb898ecc upstream.

A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI
messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0
status byte. This is usually corrected by the driver on other OSes.

This fixes MIDI sysex messages sent by PODxt.

[ tiwai: fixed white spaces ]

Signed-off-by: Artem Egorkine 
Cc: 
Link: https://lore.kernel.org/r/20221225105728.1153989-1-arteme@gmail.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list

2022-12-31T12:33:09+00:00

commit 31b573946ea55e1ea0e08ae8e83bcf879b30f83a upstream.

HDMI audio is not working on the HP EliteDesk 800 G6 because the pin is
unconnected. This issue can be resolved by using the 'hdajackretask'
tool to override the unconnected pin to force it to connect.

Signed-off-by: Jiao Zhou 
Cc: 
Link: https://lore.kernel.org/r/20221206185311.3669950-1-jiaozhou@google.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB

2022-12-31T12:33:09+00:00

commit 4bf5bf54476dffe60e6b6d8d539f67309ff599e2 upstream.

Lenovo TianYi510Pro-14IOB (17aa:3742)
require quirk for enabling headset-mic

Signed-off-by: Edward Pacman 
Cc: 
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216756
Link: https://lore.kernel.org/r/20221207133218.18989-1-edward@edward-p.xyz
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman