linux-stable.git/sound, branch v5.6.8

ASoC: dapm: fixup dapm kcontrol widget

2020-04-29T14:34:49+00:00

commit ebf1474745b4373fdde0fcf32d9d1f369b50b212 upstream.

snd_soc_dapm_kcontrol widget which is created by autodisable control
should contain correct on_val, mask and shift because it is set when the
widget is powered and changed value is applied on registers by following
code in dapm_seq_run_coalesced().

		mask |= w->mask << w->shift;
		if (w->power)
			value |= w->on_val << w->shift;
		else
			value |= w->off_val << w->shift;

Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent
double shift.
And, on_val in dapm_kcontrol_set_value() is modified to get correct
value in the dapm_seq_run_coalesced().

Signed-off-by: Gyeongtaek Lee 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.com
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devices

2020-04-29T14:34:47+00:00

commit 1c826792586f526a5a5cd21d55aad388f5bb0b23 upstream.

Many Focusrite devices supports a limited set of sample rates per
altsetting. These includes audio interfaces with ADAT ports:
 - Scarlett 18i6, 18i8 1st gen, 18i20 1st gen;
 - Scarlett 18i8 2nd gen, 18i20 2nd gen;
 - Scarlett 18i8 3rd gen, 18i20 3rd gen;
 - Clarett 2Pre USB, 4Pre USB, 8Pre USB.

Maximum rate is exposed in the last 4 bytes of Format Type descriptor
which has a non-standard bLength = 10.

Tested-by: Alexey Skobkin 
Signed-off-by: Alexander Tsoy 
Cc: 
Link: https://lore.kernel.org/r/20200418175815.12211-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Fix usb audio refcnt leak when getting spdif

2020-04-29T14:34:47+00:00

commit 59e1947ca09ebd1cae147c08c7c41f3141233c84 upstream.

snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which
increases the refcount of the snd_usb_audio object "chip".

When snd_microii_spdif_default_get() returns, local variable "chip"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.

The reference counting issue happens in several exception handling paths
of snd_microii_spdif_default_get(). When those error scenarios occur
such as usb_ifnum_to_if() returns NULL, the function forgets to decrease
the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak.

Fix this issue by jumping to "end" label when those error scenarios
occur.

Fixes: 447d6275f0c2 ("ALSA: usb-audio: Add sanity checks for endpoint accesses")
Signed-off-by: Xiyu Yang 
Signed-off-by: Xin Tan 
Cc: 
Link: https://lore.kernel.org/r/1587617711-13200-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda/hdmi: Add module option to disable audio component binding

2020-04-29T14:34:46+00:00

commit b392350ec3f229ad9603d3816f753479e441d99a upstream.

As the recent regression showed, we want sometimes to turn off the
audio component binding just for debugging.  This patch adds the
module option to control it easily without compilation.

Fixes: ade49db337a9 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223
Cc: 
Link: https://lore.kernel.org/r/20200415162523.27499-1-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda/realtek - Add new codec supported for ALC245

2020-04-29T14:34:46+00:00

commit 7fbdcd8301a84c09cebfa64f1317a6dafeec9188 upstream.

Enable new codec supported for ALC245.

Signed-off-by: Kailang Yang 
Cc: 
Link: https://lore.kernel.org/r/8c0804738b2c42439f59c39c8437817f@realtek.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda/realtek - Fix unexpected init_amp override

2020-04-29T14:34:46+00:00

commit 67791202c5e069cf2ba51db0718d56c634709e78 upstream.

The commit 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping
spec->init_amp detection") changed the way to assign spec->init_amp
field that specifies the way to initialize the amp.  Along with the
change, the commit also replaced a few fixups that set spec->init_amp
in HDA_FIXUP_ACT_PROBE with HDA_FIXUP_ACT_PRE_PROBE.  This was rather
aligning to the other fixups, and not supposed to change the actual
behavior.

However, this change turned out to cause a regression on FSC S7020,
which hit exactly the above.  The reason was that there is still one
place that overrides spec->init_amp after HDA_FIXUP_ACT_PRE_PROBE
call, namely in alc_ssid_check().

This patch fixes the regression by adding the proper spec->init_amp
override check, i.e. verifying whether it's still ALC_INIT_UNDEFINED.

Fixes: 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping spec->init_amp detection")
Cc: 
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207329
Link: https://lore.kernel.org/r/20200418190639.10082-1-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: usx2y: Fix potential NULL dereference

2020-04-29T14:34:46+00:00

commit 7686e3485253635c529cdd5f416fc640abaf076f upstream.

The error handling code in usX2Y_rate_set() may hit a potential NULL
dereference when an error occurs before allocating all us->urb[].
Add a proper NULL check for fixing the corner case.

Reported-by: Lin Yi 
Cc: 
Link: https://lore.kernel.org/r/20200420075529.27203-1-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add connector notifier delegation

2020-04-29T14:34:42+00:00

[ Upstream commit fef66ae73a611e84c8b4b74ff6f805ec5f113477 ]

It turned out that ALC1220-VB USB-audio device gives the interrupt
event to some PCM terminals while those don't allow the connector
state request but only the actual I/O terminals return the request.
The recent commit 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack
controls for PCM terminals") excluded those phantom terminals, so
those events are ignored, too.

My first thought was that this could be easily deduced from the
associated terminals, but some of them have even no associate terminal
ID, hence it's not too trivial to figure out.

Since the number of such terminals are small and limited, this patch
implements another quirk table for the simple mapping of the
connectors.  It's not really scalable, but let's hope that there will
be not many such funky devices in future.

Fixes: 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack controls for PCM terminals")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Link: https://lore.kernel.org/r/20200422113320.26664-1-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

ALSA: usb-audio: Add static mapping table for ALC1220-VB-based mobos

2020-04-29T14:34:42+00:00

[ Upstream commit a43c1c41bc5145971d06edc42a6b1e8faa0e2bc3 ]

TRX40 mobos from MSI and others with ALC1220-VB USB-audio device need
yet more quirks for the proper control names.

This patch provides the mapping table for those boards, correcting the
FU names for volume and mute controls as well as the terminal names
for jack controls.  It also improves build_connector_control() not to
add the directional suffix blindly if the string is given from the
mapping table.

With this patch applied, the new UCM profiles will be effective.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Link: https://lore.kernel.org/r/20200420062036.28567-1-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

ALSA: hda: Remove ASUS ROG Zenith from the blacklist

2020-04-29T14:34:42+00:00

[ Upstream commit a8cf44f085ac12c0b5b8750ebb3b436c7f455419 ]

The commit 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.

This patch reverts the corresponding entry as a temporary solution.
Although Zenith II and co will see get the empty HD-audio bus again,
it'd be merely resource wastes and won't affect the functionality,
so it's no end of the world.  We'll need to address this later,
e.g. by either switching to DMI string matching or using PCI ID &
SSID pairs.

Fixes: 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist")
Reported-by: Johnathan Smithinovic 
Cc: 
Link: https://lore.kernel.org/r/20200419071926.22683-1-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin