linux-stable.git/sound, branch v4.4.80

ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused

2017-08-07T02:19:47+00:00

[ Upstream commit 9f169b9f52a4afccdab7a7d2311b0c53a78a1e6b ]

When multiple front-ends are using the same back-end, putting state of a
front-end to STOP state upon receiving pause command will result in backend
stream getting released by DPCM framework unintentionally. In order to
avoid backend to be released when another active front-end stream is
present, put the stream state to PAUSED state instead of STOP state.

Signed-off-by: Patrick Lai 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion

2017-08-07T02:19:47+00:00

[ Upstream commit 13a6c8328e6056932dc680e447d4c5e8ad9add17 ]

Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion
logic allows us to save a few cpu cycles by returning early, skipping the
pending urb in case the stream was stopped; the stop logic handles the urb
and sets the completion callbacks to NULL.

Signed-off-by: Ioan-Adrian Ratiu 
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL

2017-08-07T02:19:45+00:00

[ Upstream commit a1792cda51300e15b03549cccf0b09f3be82e697 ]

The clk_ref_div is not configured in the correct position of the
register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned
the wrong value.

Signed-off-by: John Hsu 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ASoC: tlv320aic3x: Mark the RESET register as volatile

2017-08-07T02:19:44+00:00

[ Upstream commit 63c3194b82530bd71fd49db84eb7ab656b8d404a ]

The RESET register only have one self clearing bit and it should not be
cached. If it is cached, when we sync the registers back to the chip we
will initiate a software reset as well, which is not desirable.

Signed-off-by: Peter Ujfalusi 
Reviewed-by: Jarkko Nikula 
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ASoC: compress: Derive substream from stream based on direction

2017-07-27T22:06:04+00:00

commit 01b8cedfd0422326caae308641dcadaa85e0ca72 upstream.

Currently compress driver hardcodes direction as playback to get
substream from the stream. This results in getting the incorrect
substream for compressed capture usecase.
To fix this, remove the hardcoding and derive substream based on
the stream direction.

Signed-off-by: Satish Babu Patakokila 
Signed-off-by: Banajit Goswami 
Acked-By: Vinod Koul 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - set input_path bitmap to zero after moving it to new place

2017-07-05T12:37:15+00:00

commit a8f20fd25bdce81a8e41767c39f456d346b63427 upstream.

Recently we met a problem, the codec has valid adcs and input pins,
and they can form valid input paths, but the driver does not build
valid controls for them like "Mic boost", "Capture Volume" and
"Capture Switch".

Through debugging, I found the driver needs to shrink the invalid
adcs and input paths for this machine, so it will move the whole
column bitmap value to the previous column, after moving it, the
driver forgets to set the original column bitmap value to zero, as a
result, the driver will invalidate the path whose index value is the
original colume bitmap value. After executing this function, all
valid input paths are invalidated by a mistake, there are no any
valid input paths, so the driver won't build controls for them.

Fixes: 3a65bcdc577a ("ALSA: hda - Fix inconsistent input_paths after ADC reduction")
Signed-off-by: Hui Wang 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: hda - Fix endless loop of codec configure

2017-07-05T12:37:15+00:00

commit d94815f917da770d42c377786dc428f542e38f71 upstream.

azx_codec_configure() loops over the codecs found on the given
controller via a linked list.  The code used to work in the past, but
in the current version, this may lead to an endless loop when a codec
binding returns an error.

The culprit is that the snd_hda_codec_configure() unregisters the
device upon error, and this eventually deletes the given codec object
from the bus.  Since the list is initialized via list_del_init(), the
next object points to the same device itself.  This behavior change
was introduced at splitting the HD-audio code code, and forgotten to
adapt it here.

For fixing this bug, just use a *_safe() version of list iteration.

Fixes: d068ebc25e6e ("ALSA: hda - Move some codes up to hdac_bus struct")
Reported-by: Daniel Vetter 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ASoC: Fix use-after-free at card unregistration

2017-06-14T11:16:26+00:00

commit 4efda5f2130da033aeedc5b3205569893b910de2 upstream.

soc_cleanup_card_resources() call snd_card_free() at the last of its
procedure.  This turned out to lead to a use-after-free.
PCM runtimes have been already removed via soc_remove_pcm_runtimes(),
while it's dereferenced later in soc_pcm_free() called via
snd_card_free().

The fix is simple: just move the snd_card_free() call to the beginning
of the whole procedure.  This also gives another benefit: it
guarantees that all operations have been shut down before actually
releasing the resources, which was racy until now.

Reported-and-tested-by: Robert Jarzmik 
Signed-off-by: Takashi Iwai 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT

2017-06-14T11:16:26+00:00

commit ba3021b2c79b2fa9114f92790a99deb27a65b728 upstream.

snd_timer_user_tselect() reallocates the queue buffer dynamically, but
it forgot to reset its indices.  Since the read may happen
concurrently with ioctl and snd_timer_user_tselect() allocates the
buffer via kmalloc(), this may lead to the leak of uninitialized
kernel-space data, as spotted via KMSAN:

  BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10
  CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x143/0x1b0 lib/dump_stack.c:52
   kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
   kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086
   copy_to_user ./arch/x86/include/asm/uaccess.h:725
   snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004
   do_loop_readv_writev fs/read_write.c:716
   __do_readv_writev+0x94c/0x1380 fs/read_write.c:864
   do_readv_writev fs/read_write.c:894
   vfs_readv fs/read_write.c:908
   do_readv+0x52a/0x5d0 fs/read_write.c:934
   SYSC_readv+0xb6/0xd0 fs/read_write.c:1021
   SyS_readv+0x87/0xb0 fs/read_write.c:1018

This patch adds the missing reset of queue indices.  Together with the
previous fix for the ioctl/read race, we cover the whole problem.

Reported-by: Alexander Potapenko 
Tested-by: Alexander Potapenko 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: timer: Fix race between read and ioctl

2017-06-14T11:16:26+00:00

commit d11662f4f798b50d8c8743f433842c3e40fe3378 upstream.

The read from ALSA timer device, the function snd_timer_user_tread(),
may access to an uninitialized struct snd_timer_user fields when the
read is concurrently performed while the ioctl like
snd_timer_user_tselect() is invoked.  We have already fixed the races
among ioctls via a mutex, but we seem to have forgotten the race
between read vs ioctl.

This patch simply applies (more exactly extends the already applied
range of) tu->ioctl_lock in snd_timer_user_tread() for closing the
race window.

Reported-by: Alexander Potapenko 
Tested-by: Alexander Potapenko 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman