linux-stable.git/security/keys/keyctl.c, branch v3.17

Merge branch 'keys-fixes' into keys-next

2014-07-22T20:55:45+00:00

Signed-off-by: David Howells

KEYS: Allow special keys (eg. DNS results) to be invalidated by CAP_SYS_ADMIN

2014-07-17T19:45:08+00:00

Special kernel keys, such as those used to hold DNS results for AFS, CIFS and
NFS and those used to hold idmapper results for NFS, used to be
'invalidateable' with key_revoke().  However, since the default permissions for
keys were reduced:

	Commit: 96b5c8fea6c0861621051290d705ec2e971963f1
	KEYS: Reduce initial permissions on keys

it has become impossible to do this.

Add a key flag (KEY_FLAG_ROOT_CAN_INVAL) that will permit a key to be
invalidated by root.  This should not be used for system keyrings as the
garbage collector will try and remove any invalidate key.  For system keyrings,
KEY_FLAG_ROOT_CAN_CLEAR can be used instead.

After this, from userspace, keyctl_invalidate() and "keyctl invalidate" can be
used by any possessor of CAP_SYS_ADMIN (typically root) to invalidate DNS and
idmapper keys.  Invalidated keys are immediately garbage collected and will be
immediately rerequested if needed again.

Signed-off-by: David Howells 
Tested-by: Steve Dickson

KEYS: special dot prefixed keyring name bug fix

2014-07-17T13:35:14+00:00

Dot prefixed keyring names are supposed to be reserved for the
kernel, but add_key() calls key_get_type_from_user(), which
incorrectly verifies the 'type' field, not the 'description' field.
This patch verifies the 'description' field isn't dot prefixed,
when creating a new keyring, and removes the dot prefix test in
key_get_type_from_user().

Changelog v6:
- whitespace and other cleanup

Changelog v5:
- Only prevent userspace from creating a dot prefixed keyring, not
  regular keys  - Dmitry

Reported-by: Dmitry Kasatkin 
Signed-off-by: Mimi Zohar 
Acked-by: David Howells

KEYS: Move the flags representing required permission to linux/key.h

2014-03-14T17:44:49+00:00

Move the flags representing required permission to linux/key.h as the perm
parameter of security_key_permission() is in terms of them - and not the
permissions mask flags used in key->perm.

Whilst we're at it:

 (1) Rename them to be KEY_NEED_xxx rather than KEY_xxx to avoid collisions
     with symbols in uapi/linux/input.h.

 (2) Don't use key_perm_t for a mask of required permissions, but rather limit
     it to the permissions mask attached to the key and arguments related
     directly to that.

Signed-off-by: David Howells 
Tested-by: Dmitry Kasatkin

KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches

2013-09-24T09:35:19+00:00

Add support for per-user_namespace registers of persistent per-UID kerberos
caches held within the kernel.

This allows the kerberos cache to be retained beyond the life of all a user's
processes so that the user's cron jobs can work.

The kerberos cache is envisioned as a keyring/key tree looking something like:

	struct user_namespace
	  \___ .krb_cache keyring		- The register
		\___ _krb.0 keyring		- Root's Kerberos cache
		\___ _krb.5000 keyring		- User 5000's Kerberos cache
		\___ _krb.5001 keyring		- User 5001's Kerberos cache
			\___ tkt785 big_key	- A ccache blob
			\___ tkt12345 big_key	- Another ccache blob

Or possibly:

	struct user_namespace
	  \___ .krb_cache keyring		- The register
		\___ _krb.0 keyring		- Root's Kerberos cache
		\___ _krb.5000 keyring		- User 5000's Kerberos cache
		\___ _krb.5001 keyring		- User 5001's Kerberos cache
			\___ tkt785 keyring	- A ccache
				\___ krbtgt/REDHAT.COM@REDHAT.COM big_key
				\___ http/REDHAT.COM@REDHAT.COM user
				\___ afs/REDHAT.COM@REDHAT.COM user
				\___ nfs/REDHAT.COM@REDHAT.COM user
				\___ krbtgt/KERNEL.ORG@KERNEL.ORG big_key
				\___ http/KERNEL.ORG@KERNEL.ORG big_key

What goes into a particular Kerberos cache is entirely up to userspace.  Kernel
support is limited to giving you the Kerberos cache keyring that you want.

The user asks for their Kerberos cache by:

	krb_cache = keyctl_get_krbcache(uid, dest_keyring);

The uid is -1 or the user's own UID for the user's own cache or the uid of some
other user's cache (requires CAP_SETUID).  This permits rpc.gssd or whatever to
mess with the cache.

The cache returned is a keyring named "_krb." that the possessor can read,
search, clear, invalidate, unlink from and add links to.  Active LSMs get a
chance to rule on whether the caller is permitted to make a link.

Each uid's cache keyring is created when it first accessed and is given a
timeout that is extended each time this function is called so that the keyring
goes away after a while.  The timeout is configurable by sysctl but defaults to
three days.

Each user_namespace struct gets a lazily-created keyring that serves as the
register.  The cache keyrings are added to it.  This means that standard key
search and garbage collection facilities are available.

The user_namespace struct's register goes away when it does and anything left
in it is then automatically gc'd.

Signed-off-by: David Howells 
Tested-by: Simo Sorce 
cc: Serge E. Hallyn 
cc: Eric W. Biederman

aio: don't include aio.h in sched.h

2013-05-08T03:16:25+00:00

Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet 
Cc: Zach Brown 
Cc: Felipe Balbi 
Cc: Greg Kroah-Hartman 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Rusty Russell 
Cc: Jens Axboe 
Cc: Asai Thambi S P 
Cc: Selvan Mani 
Cc: Sam Bradshaw 
Cc: Jeff Moyer 
Cc: Al Viro 
Cc: Benjamin LaHaise 
Reviewed-by: "Theodore Ts'o" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

2012-12-16T23:40:50+00:00

Pull security subsystem updates from James Morris:
 "A quiet cycle for the security subsystem with just a few maintenance
  updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Smack: create a sysfs mount point for smackfs
  Smack: use select not depends in Kconfig
  Yama: remove locking from delete path
  Yama: add RCU to drop read locking
  drivers/char/tpm: remove tasklet and cleanup
  KEYS: Use keyring_alloc() to create special keyrings
  KEYS: Reduce initial permissions on keys
  KEYS: Make the session and process keyrings per-thread
  seccomp: Make syscall skipping and nr changes more consistent
  key: Fix resource leak
  keys: Fix unreachable code
  KEYS: Add payload preparsing opportunity prior to key instantiate or update

Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2012-10-14T20:39:34+00:00

Pull module signing support from Rusty Russell:
 "module signing is the highlight, but it's an all-over David Howells frenzy..."

Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.

* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
  X.509: Fix indefinite length element skip error handling
  X.509: Convert some printk calls to pr_devel
  asymmetric keys: fix printk format warning
  MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
  MODSIGN: Make mrproper should remove generated files.
  MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
  MODSIGN: Use the same digest for the autogen key sig as for the module sig
  MODSIGN: Sign modules during the build process
  MODSIGN: Provide a script for generating a key ID from an X.509 cert
  MODSIGN: Implement module signature checking
  MODSIGN: Provide module signing public keys to the kernel
  MODSIGN: Automatically generate module signing keys if missing
  MODSIGN: Provide Kconfig options
  MODSIGN: Provide gitignore and make clean rules for extra files
  MODSIGN: Add FIPS policy
  module: signature checking hook
  X.509: Add a crypto key parser for binary (DER) X.509 certificates
  MPILIB: Provide a function to read raw data into an MPI
  X.509: Add an ASN.1 decoder
  X.509: Add simple ASN.1 grammar compiler
  ...

KEYS: Add payload preparsing opportunity prior to key instantiate or update

2012-10-08T03:19:48+00:00

Give the key type the opportunity to preparse the payload prior to the
instantiation and update routines being called.  This is done with the
provision of two new key type operations:

	int (*preparse)(struct key_preparsed_payload *prep);
	void (*free_preparse)(struct key_preparsed_payload *prep);

If the first operation is present, then it is called before key creation (in
the add/update case) or before the key semaphore is taken (in the update and
instantiate cases).  The second operation is called to clean up if the first
was called.

preparse() is given the opportunity to fill in the following structure:

	struct key_preparsed_payload {
		char		*description;
		void		*type_data[2];
		void		*payload;
		const void	*data;
		size_t		datalen;
		size_t		quotalen;
	};

Before the preparser is called, the first three fields will have been cleared,
the payload pointer and size will be stored in data and datalen and the default
quota size from the key_type struct will be stored into quotalen.

The preparser may parse the payload in any way it likes and may store data in
the type_data[] and payload fields for use by the instantiate() and update()
ops.

The preparser may also propose a description for the key by attaching it as a
string to the description field.  This can be used by passing a NULL or ""
description to the add_key() system call or the key_create_or_update()
function.  This cannot work with request_key() as that required the description
to tell the upcall about the key to be created.

This, for example permits keys that store PGP public keys to generate their own
name from the user ID and public key fingerprint in the key.

The instantiate() and update() operations are then modified to look like this:

	int (*instantiate)(struct key *key, struct key_preparsed_payload *prep);
	int (*update)(struct key *key, struct key_preparsed_payload *prep);

and the new payload data is passed in *prep, whether or not it was preparsed.

Signed-off-by: David Howells 
Signed-off-by: Rusty Russell

Merge branch 'modsign-keys-devel' into security-next-keys

2012-10-02T18:30:19+00:00

Signed-off-by: David Howells