Pull EFI updates from Borislav Petkov:
 "These got delayed due to a last minute ia64 build issue which got
  fixed in the meantime.

  EFI updates collected by Ard Biesheuvel:

   - Don't move BSS section around pointlessly in the x86 decompressor

   - Refactor helper for discovering the EFI secure boot mode

   - Wire up EFI secure boot to IMA for arm64

   - Some fixes for the capsule loader

   - Expose the RT_PROP table via the EFI test module

   - Relax DT and kernel placement restrictions on ARM

  with a few followup fixes:

   - fix the build breakage on IA64 caused by recent capsule loader
     changes

   - suppress a type mismatch build warning in the expansion of
     EFI_PHYS_ALIGN on ARM"

* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
  efi: ia64: disable the capsule loader
  efi: stub: get rid of efi_get_max_fdt_addr()
  efi/efi_test: read RuntimeServicesSupported
  efi: arm: reduce minimum alignment of uncompressed kernel
  efi: capsule: clean scatter-gather entries from the D-cache
  efi: capsule: use atomic kmap for transient sglist mappings
  efi: x86/xen: switch to efi_get_secureboot_mode helper
  arm64/ima: add ima_arch support
  ima: generalize x86/EFI arch glue for other EFI architectures
  efi: generalize efi_get_secureboot
  efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
  efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
  efi/libstub/x86: simplify efi_is_native()

Pull integrity subsystem updates from Mimi Zohar:
 "Just three patches here. Other integrity changes are being upstreamed
  via EFI (defines a common EFI secure and trusted boot IMA policy) and
  BPF LSM (exporting the IMA file cache hash info based on inode).

  The three patches included here:

   - bug fix: fail calculating the file hash, when a file not opened for
     read and the attempt to re-open it for read fails.

   - defer processing the "ima_appraise" boot command line option to
     avoid enabling different modes (e.g. fix, log) to when the secure
     boot flag is available on arm.

   - defines "ima-buf" as the default IMA buffer measurement template in
     preparation for the builtin integrity "critical data" policy"

* tag 'integrity-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Don't modify file descriptor mode on the fly
  ima: select ima-buf template for buffer measurement
  ima: defer arch_ima_get_secureboot() call to IMA init time

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Add speed testing on 1420-byte blocks for networking

  Algorithms:
   - Improve performance of chacha on ARM for network packets
   - Improve performance of aegis128 on ARM for network packets

  Drivers:
   - Add support for Keem Bay OCS AES/SM4
   - Add support for QAT 4xxx devices
   - Enable crypto-engine retry mechanism in caam
   - Enable support for crypto engine on sdm845 in qce
   - Add HiSilicon PRNG driver support"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
  crypto: qat - add capability detection logic in qat_4xxx
  crypto: qat - add AES-XTS support for QAT GEN4 devices
  crypto: qat - add AES-CTR support for QAT GEN4 devices
  crypto: atmel-i2c - select CONFIG_BITREVERSE
  crypto: hisilicon/trng - replace atomic_add_return()
  crypto: keembay - Add support for Keem Bay OCS AES/SM4
  dt-bindings: Add Keem Bay OCS AES bindings
  crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
  crypto: seed - remove trailing semicolon in macro definition
  crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: cpt - Fix sparse warnings in cptpf
  hwrng: ks-sa - Add dependency on IOMEM and OF
  crypto: lib/blake2s - Move selftest prototype into header file
  crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
  crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
  crypto: ccree - rework cache parameters handling
  crypto: cavium - Use dma_set_mask_and_coherent to simplify code
  crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
  ...

Commit a408e4a86b36b ("ima: open a new file instance if no read
permissions") already introduced a second open to measure a file when the
original file descriptor does not allow it. However, it didn't remove the
existing method of changing the mode of the original file descriptor, which
is still necessary if the current process does not have enough privileges
to open a new one.

Changing the mode isn't really an option, as the filesystem might need to
do preliminary steps to make the read possible. Thus, this patch removes
the code and keeps the second open as the only option to measure a file
when it is unreadable with the original file descriptor.

Cc: <stable@vger.kernel.org> # 4.20.x: 0014cc04e8ec0 ima: Set file->f_mode
Fixes: 2fe5d6def1672 ("ima: integrity appraisal extension")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

This is in preparation to add a helper for BPF LSM programs to use
IMA hashes when attached to LSM hooks. There are LSM hooks like
inode_unlink which do not have a struct file * argument and cannot
use the existing ima_file_hash API.

An inode based API is, therefore, useful in LSM based detections like an
executable trying to delete itself which rely on the inode_unlink LSM
hook.

Moreover, the ima_file_hash function does nothing with the struct file
pointer apart from calling file_inode on it and converting it to an
inode.

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-2-kpsingh@chromium.org

The default IMA template used for all policy rules is the value set
for CONFIG_IMA_DEFAULT_TEMPLATE if the policy rule does not specify
a template. The default IMA template for buffer measurements should be
'ima-buf' - so that the measured buffer is correctly included in the IMA
measurement log entry.

With the default template format, buffer measurements are added to
the measurement list, but do not include the buffer data, making it
difficult, if not impossible, to validate. Including 'ima-buf'
template records in the measurement list by default, should not impact
existing attestation servers without 'ima-buf' template support.

Initialize a global 'ima-buf' template and select that template,
by default, for buffer measurements.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.

This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure.  So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.

Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.

This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1.  It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the x86 IMA arch code into security/integrity/ima/ima_efi.c,
so that we will be able to wire it up for arm64 in a future patch.

Co-developed-by: Chester Lin <clin@suse.com>
Signed-off-by: Chester Lin <clin@suse.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Chester reports that it is necessary to introduce a new way to pass
the EFI secure boot status between the EFI stub and the core kernel
on ARM systems. The usual way of obtaining this information is by
checking the SecureBoot and SetupMode EFI variables, but this can
only be done after the EFI variable workqueue is created, which
occurs in a subsys_initcall(), whereas arch_ima_get_secureboot()
is called much earlier by the IMA framework.

However, the IMA framework itself is started as a late_initcall,
and the only reason the call to arch_ima_get_secureboot() occurs
so early is because it happens in the context of a __setup()
callback that parses the ima_appraise= command line parameter.

So let's refactor this code a little bit, by using a core_param()
callback to capture the command line argument, and deferring any
reasoning based on its contents to the IMA init routine.

Cc: Chester Lin <clin@suse.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Link: https://lore.kernel.org/linux-arm-kernel/20200904072905.25332-2-clin@suse.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: kernel test robot <lkp@intel.com> [missing core_param()]
[zohar@linux.ibm.com: included linux/module.h]
Tested-by: Chester Lin <clin@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>