linux-stable.git/security/integrity, branch v4.14.83

ima: fix showing large 'violations' or 'runtime_measurements_count'

2018-11-13T19:15:08+00:00

commit 1e4c8dafbb6bf72fb5eca035b861e39c5896c2b7 upstream.

The 12 character temporary buffer is not necessarily long enough to hold
a 'long' value.  Increase it.

Signed-off-by: Eric Biggers 
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar 
Signed-off-by: Greg Kroah-Hartman

evm: Don't deadlock if a crypto algorithm is unavailable

2018-09-26T06:38:09+00:00

[ Upstream commit e2861fa71641c6414831d628a1f4f793b6562580 ]

When EVM attempts to appraise a file signed with a crypto algorithm the
kernel doesn't have support for, it will cause the kernel to trigger a
module load. If the EVM policy includes appraisal of kernel modules this
will in turn call back into EVM - since EVM is holding a lock until the
crypto initialisation is complete, this triggers a deadlock. Add a
CRYPTO_NOLOAD flag and skip module loading if it's set, and add that flag
in the EVM case in order to fail gracefully with an error message
instead of deadlocking.

Signed-off-by: Matthew Garrett 
Acked-by: Herbert Xu 
Signed-off-by: Mimi Zohar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ima: based on policy verify firmware signatures (pre-allocated buffer)

2018-08-03T05:50:31+00:00

[ Upstream commit fd90bc559bfba743ae8de87ff23b92a5e4668062 ]

Don't differentiate, for now, between kernel_read_file_id READING_FIRMWARE
and READING_FIRMWARE_PREALLOC_BUFFER enumerations.

Fixes: a098ecd firmware: support loading into a pre-allocated buffer (since 4.8)
Signed-off-by: Mimi Zohar 
Cc: Luis R. Rodriguez 
Cc: David Howells 
Cc: Kees Cook 
Cc: Serge E. Hallyn 
Cc: Stephen Boyd 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ima: Fallback to the builtin hash algorithm

2018-05-30T05:52:29+00:00

[ Upstream commit ab60368ab6a452466885ef4edf0cefd089465132 ]

IMA requires having it's hash algorithm be compiled-in due to it's
early use.  The default IMA algorithm is protected by Kconfig to be
compiled-in.

The ima_hash kernel parameter allows to choose the hash algorithm. When
the specified algorithm is not available or available as a module, IMA
initialization fails, which leads to a kernel panic (mknodat syscall calls
ima_post_path_mknod()).  Therefore as fallback we force IMA to use
the default builtin Kconfig hash algorithm.

Fixed crash:

$ grep CONFIG_CRYPTO_MD4 .config
CONFIG_CRYPTO_MD4=m

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4
...
[    1.545190] ima: Can not allocate md4 (reason: -2)
...
[    2.610120] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    2.611903] IP: ima_match_policy+0x23/0x390
[    2.612967] PGD 0 P4D 0
[    2.613080] Oops: 0000 [#1] SMP
[    2.613080] Modules linked in: autofs4
[    2.613080] Supported: Yes
[    2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1
[    2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
[    2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000
[    2.613080] RIP: 0010:ima_match_policy+0x23/0x390
[    2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296
[    2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004
[    2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728
[    2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000
[    2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f
[    2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000
[    2.613080] FS:  00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[    2.613080] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0
[    2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.613080] Call Trace:
[    2.613080]  ? shmem_mknod+0xbf/0xd0
[    2.613080]  ima_post_path_mknod+0x1c/0x40
[    2.613080]  SyS_mknod+0x210/0x220
[    2.613080]  entry_SYSCALL_64_fastpath+0x1a/0xa5
[    2.613080] RIP: 0033:0x7f5c1bfde570
[    2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085
[    2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570
[    2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f
[    2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000
[    2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660
[    2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002
[    2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20
[    2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88
[    2.613080] CR2: 0000000000000000
[    2.613080] ---[ end trace 9a9f0a8a73079f6a ]---
[    2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    2.673052]
[    2.675337] Kernel Offset: disabled
[    2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009

Signed-off-by: Petr Vorel 
Signed-off-by: Mimi Zohar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ima: Fix Kconfig to select TPM 2.0 CRB interface

2018-05-30T05:52:29+00:00

[ Upstream commit fac37c628fd5d68fd7298d9b57ae8601ee1b4723 ]

TPM_CRB driver provides TPM CRB 2.0 support.  If it is built as a
module, the TPM chip is registered after IMA init.  tpm_pcr_read() in
IMA fails and displays the following message even though eventually
there is a TPM chip on the system.

ima: No TPM chip found, activating TPM-bypass! (rc=-19)

Fix IMA Kconfig to select TPM_CRB so TPM_CRB driver is built in the kernel
and initializes before IMA.

Signed-off-by: Jiandi An 
Signed-off-by: Mimi Zohar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

integrity/security: fix digsig.c build error with header file

2018-05-30T05:52:02+00:00

[ Upstream commit 120f3b11ef88fc38ce1d0ff9c9a4b37860ad3140 ]

security/integrity/digsig.c has build errors on some $ARCH due to a
missing header file, so add it.

  security/integrity/digsig.c:146:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]

Reported-by: Michael Ellerman 
Signed-off-by: Randy Dunlap 
Cc: Mimi Zohar 
Cc: linux-integrity@vger.kernel.org
Link: http://kisskb.ellerman.id.au/kisskb/head/13396/
Signed-off-by: James Morris 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ima: relax requiring a file signature for new files with zero length

2018-03-19T07:42:56+00:00

[ Upstream commit b7e27bc1d42e8e0cc58b602b529c25cd0071b336 ]

Custom policies can require file signatures based on LSM labels.  These
files are normally created and only afterwards labeled, requiring them
to be signed.

Instead of requiring file signatures based on LSM labels, entire
filesystems could require file signatures.  In this case, we need the
ability of writing new files without requiring file signatures.

The definition of a "new" file was originally defined as any file with
a length of zero.  Subsequent patches redefined a "new" file to be based
on the FILE_CREATE open flag.  By combining the open flag with a file
size of zero, this patch relaxes the file signature requirement.

Fixes: 1ac202e978e1 ima: accept previously set IMA_NEW_FILE
Signed-off-by: Mimi Zohar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ima/policy: fix parsing of fsuuid

2018-02-03T16:38:53+00:00

commit 36447456e1cca853188505f2a964dbbeacfc7a7a upstream.

The switch to uuid_t invereted the logic of verfication that &entry->fsuuid
is zero during parsing of "fsuuid=" rule. Instead of making sure the
&entry->fsuuid field is not attempted to be overwritten, we bail out for
perfectly correct rule.

Fixes: 787d8c530af7 ("ima/policy: switch to use uuid_t")
Signed-off-by: Mike Rapoport 
Signed-off-by: Mimi Zohar 
Signed-off-by: Greg Kroah-Hartman

ima: fix hash algorithm initialization

2017-12-10T12:40:38+00:00

[ Upstream commit ebe7c0a7be92bbd34c6ff5b55810546a0ee05bee ]

The hash_setup function always sets the hash_setup_done flag, even
when the hash algorithm is invalid.  This prevents the default hash
algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used.

This patch sets hash_setup_done flag only for valid hash algorithms.

Fixes: e7a2ad7eb6f4 "ima: enable support for larger default filedata hash algorithms"
Signed-off-by: Boshi Wang 
Signed-off-by: Mimi Zohar 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ima: do not update security.ima if appraisal status is not INTEGRITY_PASS

2017-11-24T07:37:03+00:00

commit 020aae3ee58c1af0e7ffc4e2cc9fe4dc630338cb upstream.

Commit b65a9cfc2c38 ("Untangling ima mess, part 2: deal with counters")
moved the call of ima_file_check() from may_open() to do_filp_open() at a
point where the file descriptor is already opened.

This breaks the assumption made by IMA that file descriptors being closed
belong to files whose access was granted by ima_file_check(). The
consequence is that security.ima and security.evm are updated with good
values, regardless of the current appraisal status.

For example, if a file does not have security.ima, IMA will create it after
opening the file for writing, even if access is denied. Access to the file
will be allowed afterwards.

Avoid this issue by checking the appraisal status before updating
security.ima.

Signed-off-by: Roberto Sassu 
Signed-off-by: Mimi Zohar 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman