linux-stable.git/security/integrity/platform_certs, branch linux-5.14.y

integrity: Load mokx variables into the blacklist keyring

2021-03-11T16:34:48+00:00

During boot the Secure Boot Forbidden Signature Database, dbx,
is loaded into the blacklist keyring.  Systems booted with shim
have an equivalent Forbidden Signature Database called mokx.
Currently mokx is only used by shim and grub, the contents are
ignored by the kernel.

Add the ability to load mokx into the blacklist keyring during boot.

Signed-off-by: Eric Snowberg 
Suggested-by: James Bottomley 
Signed-off-by: David Howells 
Reviewed-by: Jarkko Sakkinen 
cc: keyrings@vger.kernel.org
Link: https://lore.kernel.org/r/c33c8e3839a41e9654f41cc92c7231104931b1d7.camel@HansenPartnership.com/
Link: https://lore.kernel.org/r/20210122181054.32635-5-eric.snowberg@oracle.com/ # v5
Link: https://lore.kernel.org/r/161428674320.677100.12637282414018170743.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/161433313205.902181.2502803393898221637.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161529607422.163428.13530426573612578854.stgit@warthog.procyon.org.uk/ # v3

certs: Add EFI_CERT_X509_GUID support for dbx entries

2021-03-11T16:31:28+00:00

This fixes CVE-2020-26541.

The Secure Boot Forbidden Signature Database, dbx, contains a list of now
revoked signatures and keys previously approved to boot with UEFI Secure
Boot enabled.  The dbx is capable of containing any number of
EFI_CERT_X509_SHA256_GUID, EFI_CERT_SHA256_GUID, and EFI_CERT_X509_GUID
entries.

Currently when EFI_CERT_X509_GUID are contained in the dbx, the entries are
skipped.

Add support for EFI_CERT_X509_GUID dbx entries. When a EFI_CERT_X509_GUID
is found, it is added as an asymmetrical key to the .blacklist keyring.
Anytime the .platform keyring is used, the keys in the .blacklist keyring
are referenced, if a matching key is found, the key will be rejected.

[DH: Made the following changes:
 - Added to have a config option to enable the facility.  This allows a
   Kconfig solution to make sure that pkcs7_validate_trust() is
   enabled.[1][2]
 - Moved the functions out from the middle of the blacklist functions.
 - Added kerneldoc comments.]

Signed-off-by: Eric Snowberg 
Signed-off-by: David Howells 
Reviewed-by: Jarkko Sakkinen 
cc: Randy Dunlap 
cc: Mickaël Salaün 
cc: Arnd Bergmann 
cc: keyrings@vger.kernel.org
Link: https://lore.kernel.org/r/20200901165143.10295-1-eric.snowberg@oracle.com/ # rfc
Link: https://lore.kernel.org/r/20200909172736.73003-1-eric.snowberg@oracle.com/ # v2
Link: https://lore.kernel.org/r/20200911182230.62266-1-eric.snowberg@oracle.com/ # v3
Link: https://lore.kernel.org/r/20200916004927.64276-1-eric.snowberg@oracle.com/ # v4
Link: https://lore.kernel.org/r/20210122181054.32635-2-eric.snowberg@oracle.com/ # v5
Link: https://lore.kernel.org/r/161428672051.677100.11064981943343605138.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/161433310942.902181.4901864302675874242.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161529605075.163428.14625520893961300757.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/bc2c24e3-ed68-2521-0bf4-a1f6be4a895d@infradead.org/ [1]
Link: https://lore.kernel.org/r/20210225125638.1841436-1-arnd@kernel.org/ [2]

integrity: Load certs from the EFI MOK config table

2020-09-16T15:53:42+00:00

Because of system-specific EFI firmware limitations, EFI volatile
variables may not be capable of holding the required contents of
the Machine Owner Key (MOK) certificate store when the certificate
list grows above some size. Therefore, an EFI boot loader may pass
the MOK certs via a EFI configuration table created specifically for
this purpose to avoid this firmware limitation.

An EFI configuration table is a much more primitive mechanism
compared to EFI variables and is well suited for one-way passage
of static information from a pre-OS environment to the kernel.

This patch adds the support to load certs from the MokListRT
entry in the MOK variable configuration table, if it's present.
The pre-existing support to load certs from the MokListRT EFI
variable remains and is used if the EFI MOK configuration table
isn't present or can't be successfully used.

Signed-off-by: Lenny Szubowicz 
Link: https://lore.kernel.org/r/20200905013107.10457-4-lszubowi@redhat.com
Signed-off-by: Ard Biesheuvel

integrity: Move import of MokListRT certs to a separate routine

2020-09-16T15:53:42+00:00

Move the loading of certs from the UEFI MokListRT into a separate
routine to facilitate additional MokList functionality.

There is no visible functional change as a result of this patch.
Although the UEFI dbx certs are now loaded before the MokList certs,
they are loaded onto different key rings. So the order of the keys
on their respective key rings is the same.

Signed-off-by: Lenny Szubowicz 
Reviewed-by: Mimi Zohar 
Link: https://lore.kernel.org/r/20200905013107.10457-3-lszubowi@redhat.com
Signed-off-by: Ard Biesheuvel

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

2020-02-26T14:21:22+00:00

Pull EFI updates for v5.7 from Ard Biesheuvel:

This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:

 - Get things cleaned up before EFI support for RISC-V arrives, which will
   increase the size of the validation matrix, and therefore the threshold to
   making drastic changes,

 - After years of defunct maintainership, the GRUB project has finally started
   to consider changes from the distros regarding UEFI boot, some of which are
   highly specific to the way x86 does UEFI secure boot and measured boot,
   based on knowledge of both shim internals and the layout of bootparams and
   the x86 setup header. Having this maintenance burden on other architectures
   (which don't need shim in the first place) is hard to justify, so instead,
   we are introducing a generic Linux/UEFI boot protocol.

Summary of changes:

 - Boot time GDT handling changes (Arvind)

 - Simplify handling of EFI properties table on arm64

 - Generic EFI stub cleanups, to improve command line handling, file I/O,
   memory allocation, etc.

 - Introduce a generic initrd loading method based on calling back into
   the firmware, instead of relying on the x86 EFI handover protocol or
   device tree.

 - Introduce a mixed mode boot method that does not rely on the x86 EFI
   handover protocol either, and could potentially be adopted by other
   architectures (if another one ever surfaces where one execution mode
   is a superset of another)

 - Clean up the contents of struct efi, and move out everything that
   doesn't need to be stored there.

 - Incorporate support for UEFI spec v2.8A changes that permit firmware
   implementations to return EFI_UNSUPPORTED from UEFI runtime services at
   OS runtime, and expose a mask of which ones are supported or unsupported
   via a configuration table.

 - Various documentation updates and minor code cleanups (Heinrich)

 - Partial fix for the lack of by-VA cache maintenance in the decompressor
   on 32-bit ARM. Note that these patches were deliberately put at the
   beginning so they can be used as a stable branch that will be shared with
   a PR containing the complete fix, which I will send to the ARM tree.

Signed-off-by: Ingo Molnar

integrity: Check properly whether EFI GetVariable() is available

2020-02-23T20:59:42+00:00

Testing the value of the efi.get_variable function pointer is not
the right way to establish whether the platform supports EFI
variables at runtime. Instead, use the newly added granular check
that can test for the presence of each EFI runtime service
individually.

Acked-by: Serge Hallyn 
Signed-off-by: Ard Biesheuvel

efi: Only print errors about failing to get certs if EFI vars are found

2020-02-18T12:35:48+00:00

If CONFIG_LOAD_UEFI_KEYS is enabled, the kernel attempts to load the certs
from the db, dbx and MokListRT EFI variables into the appropriate keyrings.

But it just assumes that the variables will be present and prints an error
if the certs can't be loaded, even when is possible that the variables may
not exist. For example the MokListRT variable will only be present if shim
is used.

So only print an error message about failing to get the certs list from an
EFI variable if this is found. Otherwise these printed errors just pollute
the kernel log ring buffer with confusing messages like the following:

[    5.427251] Couldn't get size: 0x800000000000000e
[    5.427261] MODSIGN: Couldn't get UEFI db list
[    5.428012] Couldn't get size: 0x800000000000000e
[    5.428023] Couldn't get UEFI MokListRT

Reported-by: Hans de Goede 
Signed-off-by: Javier Martinez Canillas 
Tested-by: Hans de Goede 
Acked-by: Ard Biesheuvel 
Signed-off-by: Mimi Zohar

x86/efi: remove unused variables

2019-11-29T11:23:46+00:00

commit ad723674d675 ("x86/efi: move common keyring handler functions
to new file") leave this unused.

Fixes: ad723674d675 ("x86/efi: move common keyring handler functions to new file")
Reported-by: Hulk Robot 
Signed-off-by: YueHaibing 
Link: https://lore.kernel.org/r/20191115130830.13320-1-yuehaibing@huawei.com

powerpc: Load firmware trusted keys/hashes into kernel keyring

2019-11-12T13:33:23+00:00

The keys used to verify the Host OS kernel are managed by firmware as
secure variables. This patch loads the verification keys into the
.platform keyring and revocation hashes into .blacklist keyring. This
enables verification and loading of the kernels signed by the boot
time keys which are trusted by firmware.

Signed-off-by: Nayna Jain 
Reviewed-by: Mimi Zohar 
Signed-off-by: Eric Richter 
[mpe: Search by compatible in load_powerpc_certs(), not using format]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/1573441836-3632-5-git-send-email-nayna@linux.ibm.com

x86/efi: move common keyring handler functions to new file

2019-11-12T13:33:23+00:00

The handlers to add the keys to the .platform keyring and blacklisted
hashes to the .blacklist keyring is common for both the uefi and powerpc
mechanisms of loading the keys/hashes from the firmware.

This patch moves the common code from load_uefi.c to keyring_handler.c

Signed-off-by: Nayna Jain 
Acked-by: Mimi Zohar 
Signed-off-by: Eric Richter 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/1573441836-3632-4-git-send-email-nayna@linux.ibm.com