linux-stable.git/scripts, branch v5.4.28

modpost: move the namespace field in Module.symvers last

2020-03-25T07:25:55+00:00

commit 5190044c2965514a973184ca68ef5fad57a24670 upstream.

In order to preserve backwards compatability with kmod tools, we have to
move the namespace field in Module.symvers last, as the depmod -e -E
option looks at the first three fields in Module.symvers to check symbol
versions (and it's expected they stay in the original order of crc,
symbol, module).

In addition, update an ancient comment above read_dump() in modpost that
suggested that the export type field in Module.symvers was optional. I
suspect that there were historical reasons behind that comment that are
no longer accurate. We have been unconditionally printing the export
type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the
original read_dump() code treated the export field as optional in order
to support pre <= 2.6.18 Module.symvers (which did not have the export
type field). Note that although symbol namespaces are optional, the
field will not be omitted from Module.symvers if a symbol does not have
a namespace. In this case, the field will simply be empty and the next
delimiter or end of line will follow.

Cc: stable@vger.kernel.org
Fixes: cb9b55d21fe0 ("modpost: add support for symbol namespaces")
Tested-by: Matthias Maennich 
Reviewed-by: Matthias Maennich 
Reviewed-by: Lucas De Marchi 
Signed-off-by: Jessica Yu 
Signed-off-by: Masahiro Yamada 
Signed-off-by: Greg Kroah-Hartman

kbuild: Disable -Wpointer-to-enum-cast

2020-03-25T07:25:54+00:00

commit 82f2bc2fcc0160d6f82dd1ac64518ae0a4dd183f upstream.

Clang's -Wpointer-to-int-cast deviates from GCC in that it warns when
casting to enums. The kernel does this in certain places, such as device
tree matches to set the version of the device being used, which allows
the kernel to avoid using a gigantic union.

https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L428
https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L402
https://elixir.bootlin.com/linux/v5.5.8/source/include/linux/mod_devicetable.h#L264

To avoid a ton of false positive warnings, disable this particular part
of the warning, which has been split off into a separate diagnostic so
that the entire warning does not need to be turned off for clang. It
will be visible under W=1 in case people want to go about fixing these
easily and enabling the warning treewide.

Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/887
Link: https://github.com/llvm/llvm-project/commit/2a41b31fcdfcb67ab7038fc2ffb606fd50b83a84
Signed-off-by: Nathan Chancellor 
Signed-off-by: Masahiro Yamada 
Signed-off-by: Greg Kroah-Hartman

parse-maintainers: Mark as executable

2020-03-25T07:25:49+00:00

[ Upstream commit 611d61f9ac99dc9e1494473fb90117a960a89dfa ]

This makes the script more convenient to run.

Signed-off-by: Jonathan Neuschäfer 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

kbuild: move headers_check rule to usr/include/Makefile

2020-03-05T15:43:47+00:00

commit 7ecaf069da52e472d393f03e79d721aabd724166 upstream.

Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.

It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Greg Kroah-Hartman

kbuild: remove header compile test

2020-03-05T15:43:47+00:00

commit fcbb8461fd2376ba3782b5b8bd440c929b8e4980 upstream.

There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.

The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)

I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.

Signed-off-by: Masahiro Yamada 
[ added to 5.4.y due to start of build warnings from backported patches
  because of this feature - gregkh]
Signed-off-by: Greg Kroah-Hartman

kbuild: fix DT binding schema rule to detect command line changes

2020-03-05T15:43:46+00:00

commit 7a04960560640ac5b0b89461f7757322b57d0c7a upstream.

This if_change_rule is not working properly; it cannot detect any
command line change.

The reason is because cmd-check in scripts/Kbuild.include compares
$(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here.

For if_change_rule to work properly, the stem part of cmd_* and rule_*
must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must
be named rule_dtc.

Fixes: 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks")
Signed-off-by: Masahiro Yamada 
Acked-by: Rob Herring 
Signed-off-by: Greg Kroah-Hartman

bpf, btf: Always output invariant hit in pahole DWARF to BTF transform

2020-02-24T07:36:55+00:00

[ Upstream commit 2a67a6ccb01f21b854715d86ff6432a18b97adb3 ]

When trying to compile with CONFIG_DEBUG_INFO_BTF enabled, I got this
error:

    % make -s
    Failed to generate BTF for vmlinux
    Try to disable CONFIG_DEBUG_INFO_BTF
    make[3]: *** [vmlinux] Error 1

Compiling again without -s shows the true error (that pahole is
missing), but since this is fatal, we should show the error
unconditionally on stderr as well, not silence it using the `info`
function. With this patch:

    % make -s
    BTF: .tmp_vmlinux.btf: pahole (pahole) is not available
    Failed to generate BTF for vmlinux
    Try to disable CONFIG_DEBUG_INFO_BTF
    make[3]: *** [vmlinux] Error 1

Signed-off-by: Chris Down 
Signed-off-by: Daniel Borkmann 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20200122000110.GA310073@chrisdown.name
Signed-off-by: Sasha Levin

kbuild: use -S instead of -E for precise cc-option test in Kconfig

2020-02-24T07:36:54+00:00

[ Upstream commit 3bed1b7b9d79ca40e41e3af130931a3225e951a3 ]

Currently, -E (stop after the preprocessing stage) is used to check
whether the given compiler flag is supported.

While it is faster than -S (or -c), it can be false-positive. You need
to run the compilation proper to check the flag more precisely.

For example, -E and -S disagree about the support of
"--param asan-instrument-allocas=1".

$ gcc -Werror --param asan-instrument-allocas=1 -E -x c /dev/null -o /dev/null
$ echo $?
0

$ gcc -Werror --param asan-instrument-allocas=1 -S -x c /dev/null -o /dev/null
cc1: error: invalid --param name ‘asan-instrument-allocas’; did you mean ‘asan-instrument-writes’?
$ echo $?
1

Signed-off-by: Masahiro Yamada 
Signed-off-by: Sasha Levin

kbuild: remove *.tmp file when filechk fails

2020-02-24T07:36:49+00:00

[ Upstream commit 88fe89a47153facd8cb2d06d5c8727f7224c43c2 ]

Bartosz Golaszewski reports that when "make {menu,n,g,x}config" fails
due to missing packages, a temporary file is left over, which is not
ignored by git.

For example, if GTK+ is not installed:

  $ make gconfig
  *
  * Unable to find the GTK+ installation. Please make sure that
  * the GTK+ 2.0 development package is correctly installed.
  * You need gtk+-2.0 gmodule-2.0 libglade-2.0
  *
  scripts/kconfig/Makefile:208: recipe for target 'scripts/kconfig/gconf-cfg' failed
  make[1]: *** [scripts/kconfig/gconf-cfg] Error 1
  Makefile:567: recipe for target 'gconfig' failed
  make: *** [gconfig] Error 2
  $ git status
  HEAD detached at v5.4
  Untracked files:
    (use "git add ..." to include in what will be committed)

          scripts/kconfig/gconf-cfg.tmp

  nothing added to commit but untracked files present (use "git add" to track)

This is because the check scripts are run with filechk, which misses
to clean up the temporary file on failure.

When the line

  { $(filechk_$(1)); } > $@.tmp;

... fails, it exits immediately due to the 'set -e'. Use trap to make
sure to delete the temporary file on exit.

For extra safety, I replaced $@.tmp with $(dot-target).tmp to make it
a hidden file.

Reported-by: Bartosz Golaszewski 
Signed-off-by: Masahiro Yamada 
Signed-off-by: Sasha Levin

kconfig: fix broken dependency in randconfig-generated .config

2020-02-24T07:36:32+00:00

[ Upstream commit c8fb7d7e48d11520ad24808cfce7afb7b9c9f798 ]

Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5)
produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y,
which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.

This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs
CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the
value of CONFIG_EFI is calculated.

When this happens, the has_changed flag should be set.

Currently, it takes the result from the last iteration. It should
accumulate all the results of the loop.

Fixes: 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig")
Reported-by: Vincenzo Frascino 
Signed-off-by: Masahiro Yamada 
Signed-off-by: Sasha Levin