linux-stable.git/samples, branch linux-5.13.y

samples: pktgen: fix to print when terminated normally

2021-09-18T11:42:16+00:00

[ Upstream commit c0e9422c4e6ca9abd4bd6e1598400c7231eb600b ]

Currently, most pktgen samples print the execution result when the
program is terminated normally. However, sample03 doesn't work
appropriately.

This is results of samples:

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1
    Running... ctrl^C to stop
    Device: eth0@0
    Result: OK: 19(c5+d13) usec, 1 (60byte,0frags)
    51762pps 24Mb/sec (24845760bps) errors: 0

    # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1
    Running... ctrl^C to stop

The reason why it doesn't print the execution result when the program is
terminated usually is that sample03 doesn't call the function which
prints the result, unlike other samples.

So, this commit solves this issue by calling the function before
termination. Also, this commit changes control_c function to
print_result to maintain consistency with other samples.

Signed-off-by: Juhee Kang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

samples: bpf: Fix tracex7 error raised on the missing argument

2021-09-18T11:42:05+00:00

[ Upstream commit 7d07006f05922b95518be403f08ef8437b67aa32 ]

The current behavior of 'tracex7' doesn't consist with other bpf samples
tracex{1..6}. Other samples do not require any argument to run with, but
tracex7 should be run with btrfs device argument. (it should be executed
with test_override_return.sh)

Currently, tracex7 doesn't have any description about how to run this
program and raises an unexpected error. And this result might be
confusing since users might not have a hunch about how to run this
program.

    // Current behavior
    # ./tracex7
    sh: 1: Syntax error: word unexpected (expecting ")")
    // Fixed behavior
    # ./tracex7
    ERROR: Run with the btrfs device argument!

In order to fix this error, this commit adds logic to report a message
and exit when running this program with a missing argument.

Additionally in test_override_return.sh, there is a problem with
multiple directory(tmpmnt) creation. So in this commit adds a line with
removing the directory with every execution.

Signed-off-by: Juhee Kang 
Signed-off-by: Andrii Nakryiko 
Acked-by: Yonghong Song 
Link: https://lore.kernel.org/bpf/20210727041056.23455-1-claudiajkang@gmail.com
Signed-off-by: Sasha Levin

samples: pktgen: add missing IPv6 option to pktgen scripts

2021-09-15T08:00:47+00:00

[ Upstream commit 0f0c4f1b72e090b23131700bb155944cc28b2a7b ]

Currently, "sample04" and "sample05" are not working properly when
running with an IPv6 option("-6"). The commit 0f06a6787e05 ("samples:
Add an IPv6 "-6" option to the pktgen scripts") has omitted the addition
of this option at "sample04" and "sample05".

In order to support IPv6 option, this commit adds logic related to IPv6
option.

Fixes: 0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts")

Signed-off-by: Juhee Kang 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bpf, samples: Add missing mprog-disable to xdp_redirect_cpu's optstring

2021-09-15T08:00:43+00:00

[ Upstream commit 34ad6d9d8c27293e1895b448af7d6cf5d351ad8d ]

Commit ce4dade7f12a ("samples/bpf: xdp_redirect_cpu: Load a eBPF program
on cpumap") added the following option, but missed adding it to optstring:

  - mprog-disable: disable loading XDP program on cpumap entries

Fix it and add the missing option character.

Fixes: ce4dade7f12a ("samples/bpf: xdp_redirect_cpu: Load a eBPF program on cpumap")
Signed-off-by: Matthew Cover 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20210731005632.13228-1-matthew.cover@stackpath.com
Signed-off-by: Sasha Levin

bpf, samples: Fix xdpsock with '-M' parameter missing unload process

2021-07-28T12:37:21+00:00

[ Upstream commit 2620e92ae6ed83260eb46d214554cd308ee35d92 ]

Execute the following command and exit, then execute it again, the following
error will be reported:

  $ sudo ./samples/bpf/xdpsock -i ens4f2 -M
  ^C
  $ sudo ./samples/bpf/xdpsock -i ens4f2 -M
  libbpf: elf: skipping unrecognized data section(16) .eh_frame
  libbpf: elf: skipping relo section(17) .rel.eh_frame for section(16) .eh_frame
  libbpf: Kernel error message: XDP program already attached
  ERROR: link set xdp fd failed

Commit c9d27c9e8dc7 ("samples: bpf: Do not unload prog within xdpsock") removed
the unloading prog code because of the presence of bpf_link. This is fine if
XDP_SHARED_UMEM is disabled, but if it is enabled, unloading the prog is still
needed.

Fixes: c9d27c9e8dc7 ("samples: bpf: Do not unload prog within xdpsock")
Signed-off-by: Wang Hai 
Signed-off-by: Daniel Borkmann 
Acked-by: Magnus Karlsson 
Cc: Maciej Fijalkowski 
Link: https://lore.kernel.org/bpf/20210628091815.2373487-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin

samples/bpf: Fix the error return code of xdp_redirect's main()

2021-07-14T15:07:08+00:00

[ Upstream commit 7c6090ee2a7b3315410cfc83a94c3eb057407b25 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

If bpf_map_update_elem() failed, main() should return a negative error.

Fixes: 832622e6bd18 ("xdp: sample program for new bpf_redirect helper")
Signed-off-by: Wang Hai 
Signed-off-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20210616042534.315097-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin

samples/bpf: Fix Segmentation fault for xdp_redirect command

2021-07-14T15:07:08+00:00

[ Upstream commit 85102ba58b4125ebad941d7555c3c248b23efd16 ]

A Segmentation fault error is caused when the following command
is executed.

$ sudo ./samples/bpf/xdp_redirect lo
Segmentation fault

This command is missing a device  as an argument, resulting
in out-of-bounds access from argv.

If the number of devices for the xdp_redirect parameter is not 2,
we should report an error and exit.

Fixes: 24251c264798 ("samples/bpf: add option for native and skb mode for redirect apps")
Signed-off-by: Wang Hai 
Signed-off-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20210616042324.314832-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin

Merge tag 'vfio-v5.13-rc5' of git://github.com/awilliam/linux-vfio

2021-06-03T18:52:24+00:00

Pull VFIO fixes from Alex Williamson:

 - Fix error path return value (Zhen Lei)

 - Add vfio-pci CONFIG_MMU dependency (Randy Dunlap)

 - Replace open coding with struct_size() (Gustavo A. R. Silva)

 - Fix sample driver error path (Wei Yongjun)

 - Fix vfio-platform error path module_put() (Max Gurtovoy)

* tag 'vfio-v5.13-rc5' of git://github.com/awilliam/linux-vfio:
  vfio/platform: fix module_put call in error flow
  samples: vfio-mdev: fix error handing in mdpy_fb_probe()
  vfio/iommu_type1: Use struct_size() for kzalloc()
  vfio/pci: zap_vma_ptes() needs MMU
  vfio/pci: Fix error return code in vfio_ecap_init()

samples: vfio-mdev: fix error handing in mdpy_fb_probe()

2021-05-24T19:40:13+00:00

Fix to return a negative error code from the framebuffer_alloc() error
handling case instead of 0, also release regions in some error handing
cases.

Fixes: cacade1946a4 ("sample: vfio mdev display - guest driver")
Reported-by: Hulk Robot 
Signed-off-by: Wei Yongjun 
Message-Id: <20210520133641.1421378-1-weiyongjun1@huawei.com>
Signed-off-by: Alex Williamson

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2021-05-11T23:05:56+00:00

Daniel Borkmann says:

====================
pull-request: bpf 2021-05-11

The following pull-request contains BPF updates for your *net* tree.

We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).

The main changes are:

1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
   read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.

2) Fix verifier alu32 known-const subregister bound tracking for bitwise
   operations and/or/xor, from Daniel Borkmann.

3) Reject trampoline attachment for functions with variable arguments,
   and also add a deny list of other forbidden functions, from Jiri Olsa.

4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
   switching to per-CPU buffers, from Florent Revest.

5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
   missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.

6) Add a kconfig entry to provide an option to disallow unprivileged
   BPF by default, from Daniel Borkmann.

7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
   macro is not available, from Arnaldo Carvalho de Melo.

8) Migrate test_tc_redirect to test_progs framework as prep work
   for upcoming skb_change_head() fix & selftest, from Jussi Maki.

9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
   present, from Ian Rogers.

10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
    size, from Magnus Karlsson.
====================

Signed-off-by: David S. Miller