linux-stable.git/samples/bpf/Makefile, branch v4.13.2

samples/bpf: fix a build issue

2017-07-12T03:51:29+00:00

With latest net-next:

====
clang  -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated  -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h  -Isamples/bpf \
    -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
    -Wno-compare-distinct-pointer-types \
    -Wno-gnu-variable-sized-type-not-at-end \
    -Wno-address-of-packed-member -Wno-tautological-compare \
    -Wno-unknown-warning-option \
    -O2 -emit-llvm -c samples/bpf/tcp_synrto_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/tcp_synrto_kern.o
samples/bpf/tcp_synrto_kern.c:20:10: fatal error: 'bpf_endian.h' file not found
          ^~~~~~~~~~~~~~
1 error generated.
====

net has the same issue.

Add support for ntohl and htonl in tools/testing/selftests/bpf/bpf_endian.h.
Also move bpf_helpers.h from samples/bpf to selftests/bpf and change
compiler include logic so that programs in samples/bpf can access the headers
in selftests/bpf, but not the other way around.

Signed-off-by: Yonghong Song 
Acked-by: Daniel Borkmann 
Acked-by: Lawrence Brakmo 
Signed-off-by: David S. Miller

bpf: Sample bpf program to set sndcwnd clamp

2017-07-01T23:15:14+00:00

Sample BPF program, tcp_clamp_kern.c, to demostrate the use
of setting the sndcwnd clamp. This program assumes that if the
first 5.5 bytes of the host's IPv6 addresses are the same, then
the hosts are in the same datacenter and sets sndcwnd clamp to
100 packets, SYN and SYN-ACK RTOs to 10ms and send/receive buffer
sizes to 150KB.

Signed-off-by: Lawrence Brakmo 
Signed-off-by: David S. Miller

bpf: Sample BPF program to set initial cwnd

2017-07-01T23:15:14+00:00

Sample BPF program that assumes hosts are far away (i.e. large RTTs)
and sets initial cwnd and initial receive window to 40 packets,
send and receive buffers to 1.5MB.

In practice there would be a test to insure the hosts are actually
far enough away.

Signed-off-by: Lawrence Brakmo 
Signed-off-by: David S. Miller

bpf: Sample BPF program to set congestion control

2017-07-01T23:15:14+00:00

Sample BPF program that sets congestion control to dctcp when both hosts
are within the same datacenter. In this example that is assumed to be
when they have the first 5.5 bytes of their IPv6 address are the same.

Signed-off-by: Lawrence Brakmo 
Signed-off-by: David S. Miller

bpf: Sample BPF program to set buffer sizes

2017-07-01T23:15:14+00:00

This patch contains a BPF program to set initial receive window to
40 packets and send and receive buffers to 1.5MB. This would usually
be done after doing appropriate checks that indicate the hosts are
far enough away (i.e. large RTT).

Signed-off-by: Lawrence Brakmo 
Signed-off-by: David S. Miller

bpf: Sample bpf program to set initial window

2017-07-01T23:15:13+00:00

The sample bpf program, tcp_rwnd_kern.c, sets the initial
advertized window to 40 packets in an environment where
distinct IPv6 prefixes indicate that both hosts are not
in the same data center.

Signed-off-by: Lawrence Brakmo 
Acked-by: Daniel Borkmann 
Signed-off-by: David S. Miller

bpf: Sample bpf program to set SYN/SYN-ACK RTOs

2017-07-01T23:15:13+00:00

The sample BPF program, tcp_synrto_kern.c, sets the SYN and SYN-ACK
RTOs to 10ms when both hosts are within the same datacenter (i.e.
small RTTs) in an environment where common IPv6 prefixes indicate
both hosts are in the same data center.

Signed-off-by: Lawrence Brakmo 
Acked-by: Daniel Borkmann 
Signed-off-by: David S. Miller

bpf: program to load and attach sock_ops BPF progs

2017-07-01T23:15:13+00:00

The program load_sock_ops can be used to load sock_ops bpf programs and
to attach it to an existing (v2) cgroup. It can also be used to detach
sock_ops programs.

Examples:
    load_sock_ops [-l]  
	Load and attaches a sock_ops program at the specified cgroup.
	If "-l" is used, the program will continue to run to output the
	BPF log buffer.
	If the specified filename does not end in ".o", it appends
	"_kern.o" to the name.

    load_sock_ops -r 
	Detaches the currently attached sock_ops program from the
	specified cgroup.

Signed-off-by: Lawrence Brakmo 
Acked-by: Daniel Borkmann 
Signed-off-by: David S. Miller

samples/bpf: fix a build problem

2017-06-22T15:35:19+00:00

tracex5_kern.c build failed with the following error message:
  ../samples/bpf/tracex5_kern.c:12:10: fatal error: 'syscall_nrs.h' file not found
  #include "syscall_nrs.h"
The generated file syscall_nrs.h is put in build/samples/bpf directory,
but this directory is not in include path, hence build failed.

The fix is to add $(obj) into the clang compilation path.

Signed-off-by: Yonghong Song 
Signed-off-by: David S. Miller

samples/bpf: Fix tracex5 to work with MIPS syscalls.

2017-06-14T19:03:23+00:00

There are two problems:

1) In MIPS the __NR_* macros expand to an expression, this causes the
   sections of the object file to be named like:

  .
  .
  .
  [ 5] kprobe/(5000 + 1) PROGBITS        0000000000000000 000160 ...
  [ 6] kprobe/(5000 + 0) PROGBITS        0000000000000000 000258 ...
  [ 7] kprobe/(5000 + 9) PROGBITS        0000000000000000 000348 ...
  .
  .
  .

The fix here is to use the "asm_offsets" trick to evaluate the macros
in the C compiler and generate a header file with a usable form of the
macros.

2) MIPS syscall numbers start at 5000, so we need a bigger map to hold
the sub-programs.

Signed-off-by: David Daney 
Acked-by: Daniel Borkmann 
Signed-off-by: David S. Miller