linux-stable.git/net, branch v6.6.60

SUNRPC: Remove BUG_ON call sites

2024-11-08T15:28:27+00:00

commit 789ce196a31dd13276076762204bee87df893e53 upstream.

There is no need to take down the whole system for these assertions.

I'd rather not attempt a heroic save here, as some bug has occurred
that has left the transport data structures in an unknown state.
Just warn and then leak the left-over resources.

Acked-by: Christian Brauner 
Reviewed-by: NeilBrown 
Reviewed-by: Jeff Layton 
Signed-off-by: Chuck Lever 
Signed-off-by: Dominique Martinet 
Signed-off-by: Greg Kroah-Hartman

wifi: mac80211: fix NULL dereference at band check in starting tx ba session

2024-11-08T15:28:27+00:00

commit 021d53a3d87eeb9dbba524ac515651242a2a7e3b upstream.

In MLD connection, link_data/link_conf are dynamically allocated. They
don't point to vif->bss_conf. So, there will be no chanreq assigned to
vif->bss_conf and then the chan will be NULL. Tweak the code to check
ht_supported/vht_supported/has_he/has_eht on sta deflink.

Crash log (with rtw89 version under MLO development):
[ 9890.526087] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 9890.526102] #PF: supervisor read access in kernel mode
[ 9890.526105] #PF: error_code(0x0000) - not-present page
[ 9890.526109] PGD 0 P4D 0
[ 9890.526114] Oops: 0000 [#1] PREEMPT SMP PTI
[ 9890.526119] CPU: 2 PID: 6367 Comm: kworker/u16:2 Kdump: loaded Tainted: G           OE      6.9.0 #1
[ 9890.526123] Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018
[ 9890.526126] Workqueue: phy2 rtw89_core_ba_work [rtw89_core]
[ 9890.526203] RIP: 0010:ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211
[ 9890.526279] Code: f7 e8 d5 93 3e ea 48 83 c4 28 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b 84 24 e0 f1 ff ff 48 8b 80 90 1b 00 00 <83> 38 03 0f 84 37 fe ff ff bb ea ff ff ff eb cc 49 8b 84 24 10 f3
All code
========
   0:	f7 e8                	imul   %eax
   2:	d5                   	(bad)
   3:	93                   	xchg   %eax,%ebx
   4:	3e ea                	ds (bad)
   6:	48 83 c4 28          	add    $0x28,%rsp
   a:	89 d8                	mov    %ebx,%eax
   c:	5b                   	pop    %rbx
   d:	41 5c                	pop    %r12
   f:	41 5d                	pop    %r13
  11:	41 5e                	pop    %r14
  13:	41 5f                	pop    %r15
  15:	5d                   	pop    %rbp
  16:	c3                   	retq
  17:	cc                   	int3
  18:	cc                   	int3
  19:	cc                   	int3
  1a:	cc                   	int3
  1b:	49 8b 84 24 e0 f1 ff 	mov    -0xe20(%r12),%rax
  22:	ff
  23:	48 8b 80 90 1b 00 00 	mov    0x1b90(%rax),%rax
  2a:*	83 38 03             	cmpl   $0x3,(%rax)		<-- trapping instruction
  2d:	0f 84 37 fe ff ff    	je     0xfffffffffffffe6a
  33:	bb ea ff ff ff       	mov    $0xffffffea,%ebx
  38:	eb cc                	jmp    0x6
  3a:	49                   	rex.WB
  3b:	8b                   	.byte 0x8b
  3c:	84 24 10             	test   %ah,(%rax,%rdx,1)
  3f:	f3                   	repz

Code starting with the faulting instruction
===========================================
   0:	83 38 03             	cmpl   $0x3,(%rax)
   3:	0f 84 37 fe ff ff    	je     0xfffffffffffffe40
   9:	bb ea ff ff ff       	mov    $0xffffffea,%ebx
   e:	eb cc                	jmp    0xffffffffffffffdc
  10:	49                   	rex.WB
  11:	8b                   	.byte 0x8b
  12:	84 24 10             	test   %ah,(%rax,%rdx,1)
  15:	f3                   	repz
[ 9890.526285] RSP: 0018:ffffb8db09013d68 EFLAGS: 00010246
[ 9890.526291] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9308e0d656c8
[ 9890.526295] RDX: 0000000000000000 RSI: ffffffffab99460b RDI: ffffffffab9a7685
[ 9890.526300] RBP: ffffb8db09013db8 R08: 0000000000000000 R09: 0000000000000873
[ 9890.526304] R10: ffff9308e0d64800 R11: 0000000000000002 R12: ffff9308e5ff6e70
[ 9890.526308] R13: ffff930952500e20 R14: ffff9309192a8c00 R15: 0000000000000000
[ 9890.526313] FS:  0000000000000000(0000) GS:ffff930b4e700000(0000) knlGS:0000000000000000
[ 9890.526316] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9890.526318] CR2: 0000000000000000 CR3: 0000000391c58005 CR4: 00000000001706f0
[ 9890.526321] Call Trace:
[ 9890.526324]  
[ 9890.526327] ? show_regs (arch/x86/kernel/dumpstack.c:479)
[ 9890.526335] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434)
[ 9890.526340] ? page_fault_oops (arch/x86/mm/fault.c:713)
[ 9890.526347] ? search_module_extables (kernel/module/main.c:3256 (discriminator 3))
[ 9890.526353] ? ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211

Signed-off-by: Zong-Zhe Yang 
Link: https://patch.msgid.link/20240617115217.22344-1-kevin_yang@realtek.com
Signed-off-by: Johannes Berg 
Signed-off-by: Xiangyu Chen 
Signed-off-by: Greg Kroah-Hartman

mptcp: init: protect sched with rcu_read_lock

2024-11-08T15:28:25+00:00

[ Upstream commit 3deb12c788c385e17142ce6ec50f769852fcec65 ]

Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT
creates this splat when an MPTCP socket is created:

  =============================
  WARNING: suspicious RCU usage
  6.12.0-rc2+ #11 Not tainted
  -----------------------------
  net/mptcp/sched.c:44 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  rcu_scheduler_active = 2, debug_locks = 1
  no locks held by mptcp_connect/176.

  stack backtrace:
  CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
   
   dump_stack_lvl (lib/dump_stack.c:123)
   lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
   mptcp_sched_find (net/mptcp/sched.c:44 (discriminator 7))
   mptcp_init_sock (net/mptcp/protocol.c:2867 (discriminator 1))
   ? sock_init_data_uid (arch/x86/include/asm/atomic.h:28)
   inet_create.part.0.constprop.0 (net/ipv4/af_inet.c:386)
   ? __sock_create (include/linux/rcupdate.h:347 (discriminator 1))
   __sock_create (net/socket.c:1576)
   __sys_socket (net/socket.c:1671)
   ? __pfx___sys_socket (net/socket.c:1712)
   ? do_user_addr_fault (arch/x86/mm/fault.c:1419 (discriminator 1))
   __x64_sys_socket (net/socket.c:1728)
   do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1))
   entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

That's because when the socket is initialised, rcu_read_lock() is not
used despite the explicit comment written above the declaration of
mptcp_sched_find() in sched.c. Adding the missing lock/unlock avoids the
warning.

Fixes: 1730b2b2c5a5 ("mptcp: add sched in mptcp_sock")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/523
Reviewed-by: Geliang Tang 
Signed-off-by: Matthieu Baerts (NGI0) 
Reviewed-by: Simon Horman 
Link: https://patch.msgid.link/20241021-net-mptcp-sched-lock-v1-1-637759cf061c@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

wifi: cfg80211: clear wdev->cqm_config pointer on free

2024-11-08T15:28:23+00:00

commit d5fee261dfd9e17b08b1df8471ac5d5736070917 upstream.

When we free wdev->cqm_config when unregistering, we also
need to clear out the pointer since the same wdev/netdev
may get re-registered in another network namespace, then
destroyed later, running this code again, which results in
a double-free.

Reported-by: syzbot+36218cddfd84b5cc263e@syzkaller.appspotmail.com
Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241022161742.7c34b2037726.I121b9cdb7eb180802eafc90b493522950d57ee18@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

wifi: mac80211: do not pass a stopped vif to the driver in .get_txpower

2024-11-08T15:28:23+00:00

commit 393b6bc174b0dd21bb2a36c13b36e62fc3474a23 upstream.

Avoid potentially crashing in the driver because of uninitialized private data

Fixes: 5b3dc42b1b0d ("mac80211: add support for driver tx power reporting")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau 
Link: https://patch.msgid.link/20241002095630.22431-1-nbd@nbd.name
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycled

2024-11-08T15:28:19+00:00

[ Upstream commit c40dd8c4732551605712985bc5b7045094c6458d ]

The test_run code detects whether a page has been modified and
re-initialises the xdp_frame structure if it has, using
xdp_update_frame_from_buff(). However, xdp_update_frame_from_buff()
doesn't touch frame->mem, so that wasn't correctly re-initialised, which
led to the pages from page_pool not being returned correctly. Syzbot
noticed this as a memory leak.

Fix this by also copying the frame->mem structure when re-initialising
the frame, like we do on initialisation of a new page from page_pool.

Fixes: e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen 
Signed-off-by: Daniel Borkmann 
Tested-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com
Reviewed-by: Alexander Lobakin 
Acked-by: Stanislav Fomichev 
Link: https://lore.kernel.org/bpf/20241030-test-run-mem-fix-v1-1-41e88e8cae43@redhat.com
Signed-off-by: Sasha Levin

netfilter: nft_payload: sanitize offset and length before calling skb_checksum()

2024-11-08T15:28:19+00:00

[ Upstream commit d5953d680f7e96208c29ce4139a0e38de87a57fe ]

If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().

skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed.

Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Reported-by: Slavin Liu 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin

net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension

2024-11-08T15:28:19+00:00

[ Upstream commit 04c20a9356f283da623903e81e7c6d5df7e4dc3c ]

As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability
can only checksum TCP and UDP over IPv6 if the IP header does not
contains extension.

This is enforced for UDP packets emitted from user-space to an IPv6
address as they go through ip6_make_skb(), which calls
__ip6_append_data() where a check is done on the header size before
setting CHECKSUM_PARTIAL.

But the introduction of UDP encapsulation with fou6 added a code-path
where it is possible to get an skb with a partial UDP checksum and an
IPv6 header with extension:
* fou6 adds a UDP header with a partial checksum if the inner packet
does not contains a valid checksum.
* ip6_tunnel adds an IPv6 header with a destination option extension
header if encap_limit is non-zero (the default value is 4).

The thread linked below describes in more details how to reproduce the
problem with GRE-in-UDP tunnel.

Add a check on the network header size in skb_csum_hwoffload_help() to
make sure no IPv6 packet with extension header is handed to a network
device with NETIF_F_IPV6_CSUM capability.

Link: https://lore.kernel.org/netdev/26548921.1r3eYUQgxm@benoit.monin/T/#u
Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels")
Signed-off-by: Benoît Monin 
Reviewed-by: Willem de Bruijn 
Link: https://patch.msgid.link/5fbeecfc311ea182aa1d1c771725ab8b4cac515e.1729778144.git.benoit.monin@gmx.fr
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs

2024-11-08T15:28:19+00:00

[ Upstream commit 1e67d8641813f1876a42eeb4f532487b8a7fb0a8 ]

Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.

__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].

KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci7 hci_power_on
RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138
Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78
RSP: 0018:ffff888120bafac8 EFLAGS: 00010212
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040
RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4
RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054
R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000
FS:  0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
 
 hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline]
 hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline]
 hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline]
 hci_init_sync net/bluetooth/hci_sync.c:4742 [inline]
 hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline]
 hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994
 hci_dev_do_open net/bluetooth/hci_core.c:483 [inline]
 hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015
 process_one_work kernel/workqueue.c:3267 [inline]
 process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348
 worker_thread+0x91f/0xe50 kernel/workqueue.c:3429
 kthread+0x2cb/0x360 kernel/kthread.c:388
 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")

Signed-off-by: Sungwoo Kim 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()

2024-11-08T15:28:19+00:00

[ Upstream commit 4ed234fe793f27a3b151c43d2106df2ff0d81aac ]

I got a syzbot report without a repro [1] crashing in nf_send_reset6()

I think the issue is that dev->hard_header_len is zero, and we attempt
later to push an Ethernet header.

Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c.

[1]

skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun
 kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
 RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900045269b0 EFLAGS: 00010282
RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800
RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000
RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc
R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140
R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c
FS:  00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 
  skb_push+0xe5/0x100 net/core/skbuff.c:2636
  eth_header+0x38/0x1f0 net/ethernet/eth.c:83
  dev_hard_header include/linux/netdevice.h:3208 [inline]
  nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358
  nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48
  expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
  nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288
  nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
  nf_hook include/linux/netfilter.h:269 [inline]
  NF_HOOK include/linux/netfilter.h:312 [inline]
  br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184
  nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
  nf_hook_bridge_pre net/bridge/br_input.c:277 [inline]
  br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424
  __netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562
  __netif_receive_skb_one_core net/core/dev.c:5666 [inline]
  __netif_receive_skb+0x12f/0x650 net/core/dev.c:5781
  netif_receive_skb_internal net/core/dev.c:5867 [inline]
  netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926
  tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550
  tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007
  tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053
  new_sync_write fs/read_write.c:590 [inline]
  vfs_write+0xa6d/0xc90 fs/read_write.c:683
  ksys_write+0x183/0x2b0 fs/read_write.c:736
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdbeeb7d1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48
RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff
RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8
RBP: 00007fdbeebf12be R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000008e R11: 0000000000000293 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fdbeed36058 R15: 00007ffc38de06e8
 

Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules")
Reported-by: syzbot 
Signed-off-by: Eric Dumazet 
Signed-off-by: Pablo Neira Ayuso 
Signed-off-by: Sasha Levin